{
  "draft": "draft-ietf-roll-mpl-parameter-configuration-08",
  "doc_id": "RFC7774",
  "title": "Multicast Protocol for Low-Power and Lossy Networks (MPL) Parameter Configuration Option for DHCPv6",
  "authors": [
    "Y. Doi",
    "M. Gillmore"
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "10",
  "pub_status": "PROPOSED STANDARD",
  "status": "PROPOSED STANDARD",
  "source": "Routing Over Low power and Lossy networks",
  "abstract": "This document defines a way to configure a parameter set for MPL (Multicast Protocol for Low-Power and Lossy Networks) via a DHCPv6 option.  MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL Forwarder in an MPL Domain.  Using the MPL Parameter Configuration Option defined in this document, a network can easily be configured with a single set of MPL parameters.",
  "pub_date": "March 2016",
  "keywords": [
    "MPL",
    "DHCPv6"
  ],
  "obsoletes": [],
  "obsoleted_by": [],
  "updates": [],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC7774",
  "errata_url": "https://www.rfc-editor.org/errata/rfc7774"
}