{
  "draft": "draft-ietf-behave-v6v4-xlate-stateful-12",
  "doc_id": "RFC6146",
  "title": "Stateful NAT64: Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers",
  "authors": [
    "M. Bagnulo",
    "P. Matthews",
    "I. van Beijnum"
  ],
  "format": [
    "TEXT",
    "HTML"
  ],
  "page_count": "45",
  "pub_status": "PROPOSED STANDARD",
  "status": "PROPOSED STANDARD",
  "source": "Behavior Engineering for Hindrance Avoidance",
  "abstract": "This document describes stateful NAT64 translation, which allows IPv6-only clients to contact IPv4 servers using unicast UDP, TCP, or ICMP.  One or more public IPv4 addresses assigned to a NAT64 translator are shared among several IPv6-only clients.  When stateful NAT64 is used in conjunction with DNS64, no changes are usually required in the IPv6 client or the IPv4 server.",
  "pub_date": "April 2011",
  "keywords": [
    "NAT64",
    "IPv6"
  ],
  "obsoletes": [],
  "obsoleted_by": [],
  "updates": [],
  "updated_by": [],
  "see_also": [],
  "doi": "10.17487/RFC6146",
  "errata_url": "https://www.rfc-editor.org/errata/rfc6146"
}