// vim: set et sw=4 ts=8 ft=asciidoc tw=80:
port(1)
=======

NAME
----
port - Command line interface for MacPorts

SYNOPSIS
--------
[cmdsynopsis]
*port* [*-bcdfknNopqRstuvy*] [*-D* 'portdir'|'portname'] [*-F* 'cmdfile'] ['action'] ['actionflags']
     [['portname' | 'pseudo-portname' | 'port-expressions' | 'port-url']]
     [['@version'] [+/-variant ...] ... [option=value ...]]

DESCRIPTION
-----------
*port* is designed to operate on individual or multiple 'ports', optionally
within a single call, based on the requested 'action'. If no 'action' is
specified the port command enters shell mode, in which commands are read
via stdin. If no 'portdir' or 'portname' is specified for an 'action', the
current working directory is assumed. Batch commands may be passed via a
'cmdfile'. Port 'options' are passed as key=value pairs and take precedence over
individual 'portname' options as specified in its Portfile and system-wide
settings.

Port 'variants' can be specified as '+name', which indicates the variant is
desired, or '-name', indicating the contrary. In case of ambiguities, a port
can be fully specified with the '@version_revision+variants' format.

Installed ports can be activated or deactivated without being uninstalled. A
port can be installed in multiple versions and variant combinations, but only
one of them can be 'active'. See man:portarchives[7].

When passing 'portnames' to an 'action', *port* recognizes various
'pseudo-portnames' that will expand to the specified set of ports from the
available port tree(s). These may be used in the same way as a 'portname'.

.The 'pseudo-portnames' are:

    - 'all': all the ports in each ports tree listed in 'sources.conf'
    - 'current': the port in the current working directory
    - 'active': set of installed and active ports
    - 'inactive': set of installed but inactive ports
    - 'installed': set of all installed ports
    - 'uninstalled': ports in the ports tree(s) that are not installed
    - 'outdated': installed ports that are out of date with respect to their
      current version/revision in the ports tree(s)
    - 'obsolete': set of ports that are installed but no longer exist in any
      port tree
    - 'requested': installed ports that were explicitly asked for
    - 'unrequested': installed ports that were installed only to satisfy
      dependencies
    - 'leaves': installed ports that are unrequested and have no dependents
    - 'rleaves': installed ports that are unrequested and that no
      requested ports depend on

Sets of ports can also be specified with 'pseudo-portname selectors', which
expand to the ports in which the value of the 'Portfile' option corresponding
to the selector's name (in either singular or plural form where applicable)
matches the given regular expression. Usage is: selector:regex

[options="compact"]
.The 'pseudo-portname selectors' are:
    - 'name'
    - 'version'
    - 'revision'
    - 'epoch'
    - 'variant' or 'variants'
    - 'category' or 'categories'
    - 'maintainer' or 'maintainers'
    - 'platform' or 'platforms'
    - 'description'
    - 'long_description'
    - 'homepage'
    - 'license'
    - 'portdir'

Other pseudo-portname selectors match ports which have a particular
relationship to another port. These will match ports that are direct or
recursive dependencies or dependents of the given portname:

[options="compact"]
    - 'depof'
    - 'rdepof'
    - 'rdepends'
    - 'dependentof'
    - 'rdependentof'

Search strings that will expand to a set of matching ports can be constructed
based on the "'pseudo-portname selector'":regex combination used. 'portnames'
containing valid UNIX glob patterns will also expand to the set of matching
ports. Any action passed to port will be invoked on each of them.

For example:
--------
port info variant:no_ssl
port uninstall name:sql
port echo depof:mysql5
port echo 'apache*'
--------

Logical operators "and", "or", "not", "!", "(" and ")" may be used to combine
individual 'portnames', port glob patterns and/or 'pseudo-portnames' to
construct complex 'port-expressions' that expand to the set of matching ports.

For example:
--------
port upgrade outdated and 'py27-*'
port echo maintainer:jberry and uninstalled and \( category:java and not commons* \)
--------

[NOTE]
Special shell characters like \*, \( or \) need to be escaped in order to be
passed correctly to *port*.


GLOBAL OPTIONS
--------------

The port command recognizes several global flags and options.

.Output control
-v::
    Verbose mode, generates verbose messages

-d::
    Debug mode, generate debugging messages, implies -v

-q::
    Quiet mode, suppress informational messages to a minimum, implies -N

-N::
    Non-interactive mode, interactive questions are not asked

.Installation and upgrade
-n::
    Don't follow dependencies in upgrade (affects 'upgrade' and 'install')

-R::
    Also upgrade dependents (only for 'upgrade')

-u::
    Uninstall inactive ports when upgrading and uninstalling

-y::
    Perform a dry run. All of the steps to build the ports and their
    dependencies are computed, but not actually performed. With the verbose
    flag, every step is reported; otherwise there is just one message per port,
    which allows you to easily determine the recursive deps of a port (and the
    order in which they will be built).

.Sources
-s::
    Source-only mode, build and install from source; do not attempt to fetch
    binary archives.

-b::
    Binary-only mode, install from binary archives, ignore source,
    abort if no archive available.

.Cleaning
-c::
    Autoclean mode, execute clean after 'install'

-k::
    Keep mode, do not autoclean after 'install'

.Exit status
-p::
    Despite any errors encountered, proceed to process multiple ports and
    commands.

.Development
-o::
    Honor state files even if the Portfile was modified. This flag is called -o
    because it used to mean "older".

-t::
    Enable trace mode debug facilities on platforms that support it, currently
    only macOS.
    +
    This feature is two-folded. It consists in automatically detecting and
    reporting undeclared dependencies based on what files the port reads or what
    programs the port executes. In verbose mode, it will also report unused
    dependencies for each stage of the port installation. It also consists in
    forbidding and reporting file creation and file writes outside allowed
    directories (temporary directories and $\{workpath\}).

.Misc
-f::
    Force mode, ignore state file

-D 'portdir'|'portname'::
    Specify a directory to which the port command should change before
    processing any actions. If the specified value does not contain any slashes,
    the value is used to look up a port and the current working directory is set
    to the corresponding port directory.

-F 'cmdfile'::
    Read and process the 'file' of commands specified by the argument. If the
    argument is '-', then read commands from stdin. If the option is given
    multiple times, then multiple files will be read.


USER ACTIONS
------------

Actions most commonly used by regular MacPorts users are:

search::
    Search for an available port whose name or description matches a regular expression.
+
For example:
+
--------
port search vim
--------

info::
    Displays meta-information available for 'portname'.  Specific meta-information
    may be requested through an option such as *--maintainer* or *--category*.
    Recognized field names are those from the PortIndex, see ``port help info''
    for a complete list. If no specific fields are specified, a useful
    default collection of fields will be displayed. If the global option *-q*
    is in effect, the meta-info fields will not be labeled.  If the option
    *--line* is provided, all such data will be consolidated into a single
    line per port, suitable for processing in a pipe of commands.  If the
    option *--pretty* is provided, the information will be formatted in a
    somewhat more attractive fashion for human readers. This is the default
    when no options at all are specified to info. If the option *--index* is
    provided, the information will be pulled from the PortIndex rather than
    from the Portfile. In this case variant information, such as
    dependencies, will not affect the output.
+
For example:
+
--------
port info vim +ruby
port info --category --name apache*
port -q info --category --name --version category:java
port info --line --category --name all
port info --pretty --fullname --depends gtk2
port info --index python27
--------

notes::
    Displays notes for 'portname' which usually contain useful information
    concerning setup and use of the port.

variants::
    Lists the variants available for 'portname'.

deps::
    Lists the other ports that are required to build and run portname. This is
    simply an alias for ``info --pretty --fullname --depends''.

rdeps::
    Recursively lists the other ports that are required to build and run
    portname. To display the full dependency tree instead of only showing each
    port once, use *--full*. To take dependency information from the PortIndex
    instead of the Portfile (faster, but does not take variant selections into
    account), use *--index*. To exclude dependencies that are only needed at
    build time (i.e. depends_fetch, depends_extract, depends_build), use
    *--no-build*.

dependents::
    Lists the installed ports that depend on the port 'portname'.

rdependents::
    Recursively lists the installed ports that depend on the port portname. To
    display the full tree of dependents instead of only showing each port once,
    use *--full*.

install::
    Install and activate 'portname'.

uninstall::
    Deactivate and uninstall portname. To uninstall all installed but 'inactive'
    ports, use *-u*. To recursively uninstall all dependents of this port, use
    *--follow-dependents*. To uninstall portname and then recursively uninstall
    all ports it depended on, use *--follow-dependencies*.  This will not
    uninstall dependencies that are marked as requested or that have other
    dependents.
+
For example:
+
--------
port uninstall vim
port -u uninstall
port uninstall --follow-dependents python27
--------

reclaim::
    Reclaims disk space by uninstalling inactive ports and removing unneeded
    installation files.

select::
    For a given group, selects a version to be the default by creating
    appropriate symbolic links.  For instance, python might be linked to
    python2.6. Available select groups are installed as subdirectories of
    $\{prefix\}/etc/select/ and can be listed using *--summary*.  To list the
    available versions in a group, use *--list*. To see which version is currently
    selected for a group, use *--show*. To change the selected version for
    a group, use *--set*.
+
For example:
+
--------
port select --summary
port select --show python
port select --list python
port select --set python python34
--------

activate::
    Activate the installed 'portname'.

deactivate::
    Deactivate the installed 'portname'.

setrequested::
    Mark portname as requested.

unsetrequested::
    Mark portname as unrequested.

setunrequested::
    Alias for unsetrequested command.

installed::
    Show the installed version, variants and activation status for each
    'portname'. If no arguments are given, all installed ports are displayed.

location::
    Print the install location of a given port.

contents::
    Lists the files installed by 'portname'.

provides::
    Determines which port owns a given file and can take either a relative or
    absolute path.
+
For example:
+
--------
port provides /opt/local/etc/irssi.conf
port provides include/tiff.h
--------

sync::
    Performs a sync operation only on the ports tree of a MacPorts installation,
    pulling in the latest revision available of the Portfiles from the MacPorts
    rsync server.
+
To update you would normally do:
+
--------
sudo port -d sync
--------
+
If any of the ports tree(s) uses a file: URL that points to a local
subversion working copy, sync will perform an svn update on the working
copy with the user set to the owner of the working copy.
+

outdated::
    Lists the installed ports which need an 'upgrade'.

upgrade::
    The upgrade action works on a port and its dependencies. If you want to
    change this behavior, look at the switches for *-n* (no dependencies) and
    *-R* (dependents) above.
+
--
Upgrade all outdated ports:

--------
port upgrade outdated
--------

[NOTE]
It is recommended to always upgrade all ports with the command indicated above.
Upgrading single ports as indicated in the subsequent examples should only be
performed if you know what you are doing, since this might lead to unexpected
software errors from ports that have not yet been upgraded.

// Forcing a new paragraph here by inserting a dummy space
{nbsp}

Upgrade the installed 'portname'. For example:

--------
port upgrade vim
--------

To upgrade 'portname' and the ports that depend on it:

--------
port -R upgrade libiconv
--------

To force a rebuild of 'portname' and all of its dependencies use:

--------
port upgrade --force vim
--------

To upgrade 'portname' without following its dependencies before, use *-n*.

For example:

--------
port -n upgrade wireshark
--------

[NOTE]
By selecting the variants to use in the upgraded build of the port, any variants
specified on the command line take highest precedence, then the variants active
in the latest installed version of the port, and finally the global variants
specified in variants.conf, if any. Note that upgrade will not normally rebuild
a port only to change the selected variants; you can either specify
*--enforce-variants*, or deactivate the port and reinstall it with different
variants. *--enforce-variants* will retain the variant merging procedure
described previously. Variants will not be reset to the default values.

// Forcing a new paragraph here by inserting a dummy space
{nbsp}

After the upgrade MacPorts will automatically run rev-upgrade to check for
broken ports that need to be rebuilt. If there are known problems with
rev-upgrade or other reasons why you would want to avoid running this step, you
can disable it by running port upgrade with the *--no-rev-upgrade* switch:

--------
port upgrade --no-rev-upgrade outdated
--------
--

rev-upgrade::
    Manually check for broken binaries and rebuild ports containing broken
    binaries.  rev-upgrade is usually automatically run after each upgrade,
    unless you specify the *--no-rev-upgrade* option.
    +
    rev-upgrade can run more checks against a special loadcommand in Mach-O
    binaries that should always be referencing the file itself. This check is
    most helpful for maintainers to check whether their ports have been built
    correctly. It is disabled by default and can be enabled by passing
    *--id-loadcmd-check* to rev-upgrade.
    +
    See also: man:macports.conf[5]

clean::
    Clean the files used for building 'portname'. To just remove the work files,
    use the *--work* 'actionflag'.  This is the default when no flag is given.
    To remove the distribution files (fetched tarballs, patches, etc), specify
    *--dist*. To remove any archive(s) of a port than remain in the temporary
    download directory, pass *--archive*. (This does not remove archives from
    the installed location.) To remove log files for a port, pass *--logs*. To
    remove the work files, distribution files, temporary archives and logs pass
    *--all*.
+
--
For example:

--------
port clean --dist vim
port clean --archive vim
port clean --logs vim
--------

To remove only certain version(s) of a port's archives (version is any
valid UNIX glob pattern), you can use:

--------
port clean --archive vim 6.2.114
--------

or:

--------
port clean --archive vim '6.*'
--------
--

log::
    Parses and shows log files for 'portname'. To filter log files by some
    criterions use *--phase* to specify the phase you want to show and
    *--verbosity* to specify message category (msg, info, debug).
+
For example:
+
--------
port log --phase configure vim
port log --phase fetch --verbosity debug vim
--------

logfile::
    Displays the path to the log file for 'portname'.

echo::
    Writes to stdout the arguments passed to 'port'. This follows the expansion
    of 'pseudo-portnames', portname glob patterns, 'pseudo-portname selectors'
    and the evaluation of 'port-expressions'. *echo* may be used to determine
    the exact set of ports to which a given string of arguments will expand,
    without performing any further operations on them.
+
For example:
+
--------
port echo category:net
port echo maintainer:jmpp and name:netw
port echo maintainer:jmpp and \( net* or category:text \)
--------

list::
    If no argument is given, display a list of the latest version of all
    available ports. If portname(s) are given as arguments, display a list of
    the latest version of each port.
    +
    Note that virtually all use cases involving the *list* action with one or
    more arguments would now be better served by a different action, such as
    *installed*, *echo*, *info* or *outdated*.

mirror::
    Create/update a local mirror of distfiles used for ports given on the
    command line. The filemap database can be reset by using the *--new* option
    (though if no database is found, it will be created automatically). If the
    fetched file does not match the checksum given in the Portfile, it is
    deleted. This can be used with 'pseudo-portnames', e.g. 'all', to mirror
    everything.  Note that if you use 'all', you'll most likely want to use *-p*
    so *port* doesn't quit on the first download failure.

version::
    Display the release number of the installed MacPorts infrastructure.

selfupdate::
    Updates the MacPorts system, ports tree(s) and base tools if needed, from
    the MacPorts rsync server, installing the newest infrastructure available.
+
To update you would typically do:
+
--------
sudo port selfupdate
--------
+
See 'sync' for more information about updating ports tree(s).

load::
    Provides a shortcut to using launchctl to load a port's daemon (as installed
    in /Library/LaunchDaemons). It runs:
+
--------
launchctl load -w /Library/LaunchDaemons/org.macports.${port}.plist
--------

unload::
    A shortcut to launchctl, like load, but unloads the daemon.

reload::
    A shortcut to launchctl, like load and unload, but reloads the daemon.

gohome::
    Loads the home page for the given portname in the default web browser.

usage::
    Displays a condensed usage summary.

help::
    Displays a summary of all available actions and port command syntax on
    stdout.

DEVELOPER ACTIONS
-----------------

The actions that are often used by Port developers are intended to provide
access to the different phases of a Port's build process:

dir::
    Displays the path to the directory containing 'portname'.

work::
    Displays the path to the work directory for 'portname'.

cd::
    Changes the current working directory to the one containing portname. Only
    useful in shell mode.

file::
    Displays the path to the Portfile for 'portname'.

url::
    Displays the URL for the path of the given portname, which can be passed as
    'port-url'.

cat::
    Concatenates and prints the contents of 'Portfile' on stdout.

edit::
    Opens Portfile with your default editor specified in your shell's
    environment variable. You can also use the *--editor* flag on the command line
    to specify an alternative editor.
+
For example:
+
--------
port edit --editor nano apache2
--------

fetch::
    Fetches the distribution files required to build 'portname'.

checksum::
    Compute the checksums of the distribution files for 'portname', and compare
    them to the checksums listed in 'Portfile'.

extract::
    Extracts the distribution files for 'portname'.

patch::
    Applies any required patches to 'portname's' extracted distribution files.

configure::
    Runs any configure process for 'portname'.

build::
    Build 'portname'.

destroot::
    Installs 'portname' to a temporary directory.

test::
    Tests 'portname'.

lint::
    Verifies Portfile for portname. To nitpick about whitespace and patchfile
    names, use *--nitpick*.

bump::
    Update 'portname's' checksums and revision for a new version.

distcheck::
    Check if the distfiles haven't changed and can be fetched.

distfiles::
    Display each distfile, its checksums, and the URLs used to fetch it.

livecheck::
    Check if the software hasn't been updated since the Portfile was last
    modified.


PACKAGING ACTIONS
-----------------

There are also actions for producing installable packages of ports:

pkg::
    Creates a macOS installer package of 'portname'.

mpkg::
    Creates a macOS installer metapackage of 'portname' and its dependencies.

dmg::
    Creates an Internet-enabled disk image containing a macOS package of
    'portname'.

mdmg::
    Creates an Internet-enabled disk image containing a macOS metapackage of
    'portname' and its dependencies.


EXAMPLES
--------

The following demonstrates invoking port with the extract action on portdir
``textproc/figlet'' and extract.suffix set to ``.tgz'':

--------
port extract -D textproc/figlet extract.suffix=.tgz
--------

FILES
-----

$\{prefix\}/etc/macports/macports.conf::
    Global configuration file for the MacPorts system.

$\{prefix\}/etc/macports/sources.conf::
    Global listing of the ports trees used by MacPorts. This file also enables
    rsync synchronization.

$\{prefix\}/etc/macports/variants.conf::
    Global variants used when a port is installed.

~/.macports/macports.conf::
    User configuration file for the MacPorts system. It overrides the global
    'macports.conf(5)' file.

DIAGNOSTICS
-----------
The *port* utility exits 0 on success, and >0 if an error occurs.


SEE ALSO
--------
man:macports.conf[5], man:portfile[7], man:portgroup[7],
man:portstyle[7], man:porthier[7]


AUTHORS
-------
 (C) 2002-2003 Apple Inc.
 (C) 2004-2018 The MacPorts Project
 Landon Fuller <landonf@macports.org>
 James Berry <jberry@macports.org>
 Jordan K. Hubbard <jkh@macports.org>
 Juan Manuel Palacios <jmpp@macports.org>
 Kevin Van Vechten <kevin@opendarwin.org>
 Ole Guldberg Jensen <olegb@opendarwin.org>
 Robert Shaw <rshaw@opendarwin.org>
 Chris Ridd <cjr@opendarwin.org>
 Matt Anton <matt@opendarwin.org>
 Joe Auty <joe@opendarwin.org>
 Rainer Mueller <raimue@macports.org>
