/*
    SPDX-FileCopyrightText: 2003-2009 Cies Breijs <cies AT kde DOT nl>

    SPDX-License-Identifier: GPL-2.0-or-later
*/

#include "mainwindow.h"

#include <QBoxLayout>
#include <QDebug>
#include <QDir>
#include <QFileInfo>
#include <QFileDialog>
#include <QInputDialog>
#include <QLabel>
#include <QMenu>
#include <QPointer>
#include <QPrintDialog>
#include <QPrinter>
#include <QSaveFile>
#include <QStackedWidget>
#include <QStandardPaths>
#include <QStatusBar>
#include <QTimer>

#include <KActionCollection>
#include <KConfigGroup>
#include <KHelpClient>
#include <KIO/StatJob>
#include <KLocalizedString>
#include <KMessageBox>
#include <KRecentFilesAction>
#include <KSharedConfig>
#include <KToolBarPopupAction>

#include <kns3/downloaddialog.h>

#include "interpreter/errormsg.h"
#include "interpreter/translator.h"


static const int MARGIN_SIZE = 3;  // defaultly styled margins look shitty
static const char* const GHNS_TARGET = "kturtle/examples";

MainWindow::MainWindow()
{
	setupDockWindows();  // the setup order matters
	setupActions();
	setupCanvas();
	setupInterpreter();
	setupEditor();
	setupStatusBar();

	iterationTimer = new QTimer(this);
	connect(iterationTimer, &QTimer::timeout, this, &MainWindow::iterate);

	connect(editor, &Editor::contentChanged, inspector, &Inspector::disable);
	connect(editor, &Editor::contentChanged, errorDialog, &ErrorDialog::disable);

	connect(errorDialog, &ErrorDialog::currentlySelectedError, editor, &Editor::markCurrentError);

	colorPicker = nullptr;

	statusBar()->showMessage(i18nc("@info:status the application is ready for commands", "Ready"));
	updateContentName();  // also sets the window caption to 'untitled'
	setRunSpeed(1);  // full speed with highlighting
	abort();  // sets the run-states for the actions right

	setupGUI();

	// after all is set up:
	readConfig();
	updateLanguagesMenu();
	
	currentlyRunningConsole = false;
}

MainWindow::~MainWindow()
{
	delete editor;
	KSharedConfig::openConfig()->sync();
}

void MainWindow::closeEvent(QCloseEvent *event)
{
	if (editor->maybeSave()) {
		event->accept();
		writeConfig();
	} else {
		event->ignore();
	}
}

void MainWindow::filePrintDialog()
{
	QPrinter printer;
	QPointer<QPrintDialog> printDialog = new QPrintDialog(&printer, this);
	if (printDialog->exec()) {
		QPainter painter;
		painter.begin(&printer);
		editor->document()->drawContents(&painter);
		painter.end();
	}
	delete printDialog;
}

void MainWindow::canvasPrintDialog()
{
	QPrinter printer;
	QPointer<QPrintDialog> printDialog = new QPrintDialog(&printer, this);
	if (printDialog->exec()) {
		QPainter painter;
		painter.begin(&printer);
		canvas->scene()->render(&painter);
		painter.end();
	}
	delete printDialog;
}

void MainWindow::showDirectionDialog()
{
	directionDialog = new DirectionDialog(canvas->turtleAngle(), this);
	connect(directionDialog, &DirectionDialog::pasteText, editor, &Editor::insertPlainText);
}
void MainWindow::showColorPicker()
{
	if (!colorPicker) {
		colorPicker = new ColorPicker(this);
		connect(colorPicker, &ColorPicker::pasteText, editor, &Editor::insertPlainText);
	}
	colorPicker->show();
}


void MainWindow::contextHelp()
{
  KHelpClient::invokeHelp(contextHelpAnchor);
}

/*void MainWindow::whatsThis()
{
	QWhatsThis::enterWhatsThisMode();
}*/

void MainWindow::documentWasModified()
{
//TODO remove this function or make it do something
// 	setWindowModified(textEdit->document()->isModified());
}

void MainWindow::setRunSpeed(int speed)
{
	switch (speed) {
		case 0: dedicatedSpeedAct->setChecked(true); break;
		case 1: fullSpeedAct->setChecked(true);      break;
		case 2: slowSpeedAct->setChecked(true);      break;
		case 3: slowerSpeedAct->setChecked(true);    break;
		case 4: slowestSpeedAct->setChecked(true);   break;
		case 5: stepSpeedAct->setChecked(true);      break;
	}
	//TODO runOptionBox->setCurrentIndex(speed);
	runSpeed = speed;
}

void MainWindow::setupActions()
{
	QAction * a;
	KActionCollection* ac = actionCollection();

	// WHAT IS THIS?
	// Similar to a status tip, but not the same.
	// A status tip is displayed on hover, a whatisthis is displayed when
	// an item is clicked on it whatisthis mode  (cies doesn't like whatis mode for every little widget)
	// (he thinks whatis is to give the translators even more work)

	// File menu actions
	a = actionCollection()->addAction(KStandardAction::New,  QStringLiteral("file_new"), editor, SLOT(newFile()));
	a->setStatusTip(i18n("Create a new file"));
	a->setWhatsThis(i18n("New File: Create a new file"));

	a = actionCollection()->addAction(KStandardAction::Open,  QStringLiteral("file_open"), editor, SLOT(openFile()));
	a->setStatusTip(i18n("Open an existing file"));
	a->setWhatsThis(i18n("Open File: Open an existing file"));

	//TODO: Is this correct? -- It doesn't seem to be working
	recentFilesAction = dynamic_cast<KRecentFilesAction*>(actionCollection()->addAction(KStandardAction::OpenRecent,  QStringLiteral("file_recent"), editor, SLOT(openFile(QUrl))));
	recentFilesAction->setStatusTip(i18n("Open a recently used file"));
	recentFilesAction->setWhatsThis(i18n("Open Recent File: Open a recently used file"));
	
	a = new QAction(QIcon::fromTheme(QStringLiteral("get-hot-new-stuff")), i18n("Get more examples..."), this);
	actionCollection()->addAction(QStringLiteral("get_new_examples"), a);
	a->setText(i18n("Get more examples..."));
	connect(a, &QAction::triggered, this, &MainWindow::getNewExampleDialog);

	a = actionCollection()->addAction(KStandardAction::Save,  QStringLiteral("file_save"), editor, SLOT(saveFile()));
	a->setStatusTip(i18n("Save the current file to disk"));
	a->setWhatsThis(i18n("Save File: Save the current file to disk"));
	connect(editor->document(), &QTextDocument::modificationChanged, a, &QAction::setEnabled);

	a = actionCollection()->addAction(KStandardAction::SaveAs,  QStringLiteral("file_save_as"), editor, SLOT(saveFileAs()));
	a->setStatusTip(i18n("Save the current file under a different name"));
	a->setWhatsThis(i18n("Save File As: Save the current file under a different name"));

	exportToHtmlAct = actionCollection()->addAction(QStringLiteral("file_export_to_html"));
	exportToHtmlAct->setText(i18n("Export to &HTML..."));
	exportToHtmlAct->setStatusTip(i18n("Export the contents of the editor as HTML"));
	exportToHtmlAct->setWhatsThis(i18n("Export to HTML: Export the contents of the editor as HTML"));
	connect(exportToHtmlAct, &QAction::triggered, this, &MainWindow::exportToHtml);

	a = actionCollection()->addAction(KStandardAction::Print, QStringLiteral("file_print"), this, SLOT(filePrintDialog()));
	a->setStatusTip(i18n("Print the code"));
	a->setWhatsThis(i18n("Print: Print the code"));

	a = actionCollection()->addAction(KStandardAction::Quit, QStringLiteral("file_quit"), this, SLOT(close()));
	a->setStatusTip(i18n("Quit KTurtle"));
	a->setWhatsThis(i18n("Quit: Quit KTurtle"));

	// Edit menu actions
	a = KStandardAction::undo(editor->view(), SLOT(undo()), ac);
	a->setStatusTip(i18n("Undo a change in the editor"));
	a->setWhatsThis(i18n("Undo: Undo a change in the editor"));
	a->setEnabled(false);
	connect(editor->view(), &QTextEdit::undoAvailable, a, &QAction::setEnabled);

	a = KStandardAction::redo(editor->view(), SLOT(redo()), ac);
	a->setStatusTip(i18n("Redo a previously undone change in the editor"));
	a->setWhatsThis(i18n("Redo: Redo a previously undone change in the editor"));
	a->setEnabled(false);
	connect(editor->view(), &QTextEdit::redoAvailable, a, &QAction::setEnabled);

	a = KStandardAction::cut(editor->view(), SLOT(cut()), ac);
	a->setStatusTip(i18n("Cut the selected text to the clipboard"));
	a->setWhatsThis(i18n("Cut: Cut the selected text to the clipboard"));
	a->setEnabled(false);
	connect(editor->view(), &QTextEdit::copyAvailable, a, &QAction::setEnabled);

	a = KStandardAction::copy(editor->view(), SLOT(copy()), ac);
	a->setStatusTip(i18n("Copy the selected text to the clipboard"));
	a->setWhatsThis(i18n("Copy: Copy the selected text to the clipboard"));
	a->setEnabled(false);
	connect(editor->view(), &QTextEdit::copyAvailable, a, &QAction::setEnabled);

	a = KStandardAction::paste(editor->view(), SLOT(paste()), ac);
	a->setStatusTip(i18n("Paste the clipboard's content into the current selection"));
	a->setWhatsThis(i18n("Paste: Paste the clipboard's content into the current selection"));

	a = KStandardAction::selectAll(editor->view(), SLOT(selectAll()), ac);
	a->setStatusTip(i18n("Select all the code in the editor"));
	a->setWhatsThis(i18n("Select All: Select all the code in the editor"));
	a->setEnabled(true);

	a  = new QAction(i18n("Overwrite Mode"), this);
	actionCollection()->addAction(QStringLiteral("overwrite"), a );
	a->setStatusTip(i18n("Toggle between the 'insert' and 'overwrite' mode"));
	a->setWhatsThis(i18n("Overwrite Mode: Toggle between the 'insert' and 'overwrite' mode"));
	actionCollection()->setDefaultShortcut(a, QKeySequence(Qt::Key_Insert));
	a->setCheckable(true);
	a->setChecked(false);
	connect(a, &QAction::toggled, this, &MainWindow::toggleOverwriteMode);

	a = KStandardAction::find(editor, SLOT(find()), ac);
	a->setStatusTip(i18n("Search through the code in the editor"));
	a->setWhatsThis(i18n("Find: Search through the code in the editor"));

	a = KStandardAction::findNext(editor, SLOT(findNext()), ac);
	a->setStatusTip(i18n("Continue searching through the code in the editor"));
	a->setWhatsThis(i18n("Find Next: Continue searching through the code in the editor"));

	a = KStandardAction::findPrev(editor, SLOT(findPrev()), ac);
	a->setStatusTip(i18n("Continue searching backwards through the code in the editor"));
	a->setWhatsThis(i18n("Find Previous: Continue searching backwards through the code in the editor"));

	//TODO: Implement search/replace
	//a = KStandardAction::replace(editor, SLOT(replace()), ac);
	//a->setStatusTip(i18n("Search and replace"));
	//a->setWhatsThis(i18n("Replace: Replace text in the editor"));

	// Canvas menu action
	exportToPngAct = actionCollection()->addAction(QStringLiteral("canvas_export_to_png"));
	exportToPngAct->setText(i18n("Export to &Image (PNG)..."));
	exportToPngAct->setStatusTip(i18n("Export the current canvas to a PNG raster image"));
	exportToPngAct->setWhatsThis(i18n("Export to PNG: Export the current canvas to a PNG raster image"));
	connect(exportToPngAct, &QAction::triggered, this, &MainWindow::exportToPng);

	exportToSvgAct = actionCollection()->addAction(QStringLiteral("canvas_export_to_svg"));
	exportToSvgAct->setText(i18n("Export to &Drawing (SVG)..."));
	exportToSvgAct->setStatusTip(i18n("Export the current canvas to Scalable Vector Graphics"));
	exportToSvgAct->setWhatsThis(i18n("Export to SVG: Export the current canvas to Scalable Vector Graphics"));
	connect(exportToSvgAct, &QAction::triggered, this, &MainWindow::exportToSvg);

	printCanvasAct = new QAction(QIcon::fromTheme(QStringLiteral("document-print")), i18n("&Print Canvas..."), this);
	actionCollection()->addAction(QStringLiteral("canvas_print"), printCanvasAct);
	printCanvasAct->setStatusTip(i18n("Print the canvas"));
	printCanvasAct->setWhatsThis(i18n("Print: Print the canvas"));
	connect(printCanvasAct, &QAction::triggered, this, &MainWindow::canvasPrintDialog);

	// Run menu actions
	runAct = new QAction(QIcon::fromTheme(QStringLiteral("media-playback-start")), i18n("&Run"), this);
	actionCollection()->addAction(QStringLiteral("run"), runAct);
	actionCollection()->setDefaultShortcut(runAct, QKeySequence(Qt::Key_F5));
	runAct->setStatusTip(i18n("Execute the program"));
	runAct->setWhatsThis(i18n("Run: Execute the program"));
	connect(runAct, &QAction::triggered, this, &MainWindow::run);

	pauseAct = new QAction(QIcon::fromTheme(QStringLiteral("media-playback-pause")), i18n("&Pause"), this);
	actionCollection()->addAction(QStringLiteral("pause"), pauseAct);
	pauseAct->setCheckable(true);
	actionCollection()->setDefaultShortcut(pauseAct, QKeySequence(Qt::Key_F6));
	pauseAct->setStatusTip(i18n("Pause execution"));
	pauseAct->setWhatsThis(i18n("Pause: Pause execution"));
	connect(pauseAct, &QAction::triggered, this, &MainWindow::pause);

	abortAct = new QAction(QIcon::fromTheme(QStringLiteral("process-stop")), i18n("&Abort"), this);
	actionCollection()->addAction(QStringLiteral("abort"), abortAct);
	actionCollection()->setDefaultShortcut(abortAct, QKeySequence(Qt::Key_F7));
	abortAct->setStatusTip(i18n("Stop executing program"));
	abortAct->setWhatsThis(i18n("Abort: Stop executing program"));
	connect(abortAct, &QAction::triggered, this, &MainWindow::abort);

// 	new QAction(i18n("&Indent"), "format-indent-more", CTRL+Key_I, this, SLOT(slotIndent()), ac, "edit_indent");
// 	new QAction(i18n("&Unindent"), "format-indent-less", CTRL+SHIFT+Key_I, this, SLOT(slotUnIndent()), ac, "edit_unindent");
// 	new QAction(i18n("Cl&ean Indentation"), 0, 0, this, SLOT(slotCleanIndent()), ac, "edit_cleanIndent");
// 	new QAction(i18n("Co&mment"), 0, CTRL+Key_D, this, SLOT(slotComment()), ac, "edit_comment");
// 	new QAction(i18n("Unc&omment"), 0, CTRL+SHIFT+Key_D, this, SLOT(slotUnComment()), ac, "edit_uncomment");

	// Tools menu actions
	a = new QAction(i18n("&Direction Chooser..."), this);
	actionCollection()->addAction(QStringLiteral("direction_chooser"), a);
	a->setStatusTip(i18n("Shows the direction chooser dialog"));
	a->setWhatsThis(i18n("Direction Chooser: Show the direction chooser dialog"));
	connect(a, &QAction::triggered, this, &MainWindow::showDirectionDialog);

	a = new QAction(i18n("&Color Picker..."), this);
	actionCollection()->addAction(QStringLiteral("color_picker"), a);
	a->setStatusTip(i18n("Shows the color picker dialog"));
	a->setWhatsThis(i18n("Color Picker: Show the color picker dialog"));
	connect(a, &QAction::triggered, this, &MainWindow::showColorPicker);

	// Settings menu action
	a = new QAction(i18n("Show &Editor"), this);
	actionCollection()->addAction(QStringLiteral("show_editor"), a);
	a->setStatusTip(i18n("Show or hide the Code Editor"));
	a->setWhatsThis(i18n("Show Code Editor: Show or hide the Code Editor"));
	actionCollection()->setDefaultShortcut(a, QKeySequence(Qt::CTRL + Qt::Key_E));
	a->setCheckable(true);
	a->setChecked(true);
	connect(a, &QAction::toggled, editorDock, &LocalDockWidget::setVisible);
	connect(editorDock, &LocalDockWidget::visibilityChanged, a, &QAction::setChecked);

	a = new QAction(i18n("Show &Inspector"), this);
	actionCollection()->addAction(QStringLiteral("show_inspector"), a);
	a->setStatusTip(i18n("Show or hide the Inspector"));
	a->setWhatsThis(i18n("Show Inspector: Show or hide the Inspector"));
	actionCollection()->setDefaultShortcut(a, QKeySequence(Qt::CTRL + Qt::Key_I));
	a->setCheckable(true);
	a->setChecked(true);
	connect(a, &QAction::toggled, inspectorDock, &LocalDockWidget::setVisible);
	connect(inspectorDock, &LocalDockWidget::visibilityChanged, a, &QAction::setChecked);

	a = new QAction(i18n("Show E&rrors"), this);
	actionCollection()->addAction(QStringLiteral("show_errors"), a);
	a->setStatusTip(i18n("Show or hide the Errors tab"));
	a->setWhatsThis(i18n("Show Errors: Show or hide the Errors tab"));
	a->setCheckable(true);
	a->setChecked(false);
	connect(a, &QAction::toggled, this, &MainWindow::showErrorDialog);
        
// 	a = new QAction(i18n("Show &Console"), this);
// 	actionCollection()->addAction("show_console", a);
// 	a->setStatusTip(i18n("Show or hide the interactive Console tab"));
// 	a->setWhatsThis(i18n("Show Console: Show or hide the interactive Console tab"));
// 	a->setCheckable(true);
// 	a->setChecked(false);
// 	connect(a, SIGNAL(toggled(bool)), consoleDock, SLOT(setVisible(bool)));
// 	connect(consoleDock, SIGNAL(visibilityChanged(bool)), a, SLOT(setChecked(bool)));

	a = new QAction(i18n("Show &Line Numbers"), this);
	actionCollection()->addAction(QStringLiteral("line_numbers"), a);
	a->setStatusTip(i18n("Turn the line numbers on/off in the editor"));
	a->setWhatsThis(i18n("Show Line Numbers: Turn the line numbers on/off in the editor"));
	actionCollection()->setDefaultShortcut(a, QKeySequence(Qt::Key_F11));
	a->setCheckable(true);
	a->setChecked(true);
	connect(a, &QAction::toggled, editor, &Editor::toggleLineNumbers);

	// Help menu actions
	contextHelpAct = ac->addAction(QStringLiteral("context_help"));
	contextHelpAct->setText(QLatin1String(""));
	contextHelpAct->setIcon(QIcon::fromTheme(QStringLiteral("help-about")));
	actionCollection()->setDefaultShortcut(contextHelpAct, QKeySequence(Qt::Key_F2));
	contextHelpAct->setStatusTip(i18n("Get help on the command under the cursor"));
	contextHelpAct->setWhatsThis(i18n("Context Help: Get help on the command under the cursor"));
	connect(contextHelpAct, &QAction::triggered, this, &MainWindow::contextHelp);
	updateContextHelpAction();

	a = actionCollection()->addAction(KStandardAction::HelpContents, QStringLiteral("help_contents"), this, SLOT(appHelpActivated()));
	a->setStatusTip(i18n("Help"));
	a->setWhatsThis(i18n("Help: Open manual for KTurtle"));

	// Menuless actions
	console = new Console(this);
	console->setText(i18n("Console"));
	actionCollection()->setDefaultShortcut(console, QKeySequence(Qt::Key_F4));
	actionCollection()->addAction(QStringLiteral("console"), console);
	connect(console, &Console::execute, this, &MainWindow::execute);

	executeConsoleAct = actionCollection()->addAction(QStringLiteral("execute_console"));
	executeConsoleAct->setIcon(QIcon::fromTheme(QStringLiteral("go-jump-locationbar")));
	executeConsoleAct->setText(i18n("Execute"));
	connect(executeConsoleAct, &QAction::triggered, console, &Console::executeActionTriggered);
	executeConsoleAct->setWhatsThis(i18n("Execute: Executes the current line in the console"));

	// The run speed action group
	QActionGroup* runSpeedGroup = new QActionGroup(this);

	// The run action collection, this is used in the toolbar to create a dropdown menu on the run button
	KToolBarPopupAction* runSpeedAction = new KToolBarPopupAction(QIcon::fromTheme(QStringLiteral("media-playback-start")), i18n("&Run"), this);
	connect(runSpeedAction, &KToolBarPopupAction::triggered, this, &MainWindow::run);
	QMenu* runSpeedActionMenu = runSpeedAction->menu();
	actionCollection()->addAction(QStringLiteral("run_speed"), runSpeedAction);
	runSpeedActionMenu->setStatusTip(i18n("Execute the program, or use the drop down menu to select the run speed"));
	runSpeedActionMenu->setWhatsThis(i18n("Run: Execute the program, or use the drop down menu to select the run speed"));
	connect(runSpeedActionMenu, &QMenu::triggered, this, &MainWindow::run);

	dedicatedSpeedAct = new QAction(i18nc("@option:radio", "Full Speed (&no highlighting and inspector)"), this);
	actionCollection()->addAction(QStringLiteral("dedicated_speed"), dedicatedSpeedAct);
	dedicatedSpeedAct->setCheckable(true);
	dedicatedSpeedAct->setStatusTip(i18n("Run the program at full speed, with highlighting and inspector disabled"));
	dedicatedSpeedAct->setWhatsThis(i18n("Full Speed: Run the program at full speed, with highlighting and inspector disabled"));
	connect(dedicatedSpeedAct, &QAction::triggered, this, &MainWindow::setDedicatedSpeed);
	runSpeedGroup->addAction(dedicatedSpeedAct);
	runSpeedActionMenu->addAction(dedicatedSpeedAct);

	fullSpeedAct = new QAction(i18nc("@option:radio", "&Full Speed"), this);
	actionCollection()->addAction(QStringLiteral("full_speed"), fullSpeedAct);
	fullSpeedAct->setCheckable(true);
	fullSpeedAct->setChecked(true);
	fullSpeedAct->setStatusTip(i18n("Run the program at full speed"));
	fullSpeedAct->setWhatsThis(i18n("Full Speed: Run the program at full speed"));
	connect(fullSpeedAct, &QAction::triggered, this, &MainWindow::setFullSpeed);
	runSpeedGroup->addAction(fullSpeedAct);
	runSpeedActionMenu->addAction(fullSpeedAct);

	slowSpeedAct = new QAction(i18nc("@option:radio choose the slow speed", "&Slow"), this);
	actionCollection()->addAction(QStringLiteral("slow_speed"), slowSpeedAct);
	slowSpeedAct->setCheckable(true);
	slowSpeedAct->setStatusTip(i18n("Run the program at a slow speed"));
	slowSpeedAct->setWhatsThis(i18n("Slow Speed: Run the program at a slow speed"));
	connect(slowSpeedAct, &QAction::triggered, this, &MainWindow::setSlowSpeed);
	runSpeedGroup->addAction(slowSpeedAct);
	runSpeedActionMenu->addAction(slowSpeedAct);

	slowerSpeedAct = new QAction(i18nc("@option:radio", "S&lower"), this);
	actionCollection()->addAction(QStringLiteral("slower_speed"), slowerSpeedAct);
	slowerSpeedAct->setCheckable(true);
	slowerSpeedAct->setStatusTip(i18n("Run the program at a slower speed"));
	slowerSpeedAct->setWhatsThis(i18n("Slower Speed: Run the program at a slower speed"));
	connect(slowerSpeedAct, &QAction::triggered, this, &MainWindow::setSlowerSpeed);
	runSpeedGroup->addAction(slowerSpeedAct);
	runSpeedActionMenu->addAction(slowerSpeedAct);

	slowestSpeedAct = new QAction(i18nc("@option:radio", "Sl&owest"), this);
	actionCollection()->addAction(QStringLiteral("slowest_speed"), slowestSpeedAct);
	slowestSpeedAct->setCheckable(true);
	slowestSpeedAct->setStatusTip(i18n("Run the program at the slowest speed"));
	slowestSpeedAct->setWhatsThis(i18n("Slowest Speed: Run the program at the slowest speed"));
	connect(slowestSpeedAct, &QAction::triggered, this, &MainWindow::setSlowestSpeed);
	runSpeedGroup->addAction(slowestSpeedAct);
	runSpeedActionMenu->addAction(slowestSpeedAct);

	stepSpeedAct = new QAction(i18nc("@option:radio", "S&tep-by-Step"), this);
	actionCollection()->addAction(QStringLiteral("step_speed"), stepSpeedAct);
	stepSpeedAct->setCheckable(true);
	stepSpeedAct->setStatusTip(i18n("Run the program one step at a time"));
	stepSpeedAct->setWhatsThis(i18n("Step Speed: Run the program one step at a time"));
	connect(stepSpeedAct, &QAction::triggered, this, &MainWindow::setStepSpeed);
	runSpeedGroup->addAction(stepSpeedAct);
	runSpeedActionMenu->addAction(stepSpeedAct);
}


void MainWindow::setupCanvas()
{
	// put the canvas in a layout as the central widget of the mainwindow
	QWidget* centralWidget = new QWidget(this);
	QHBoxLayout* centralLayout = new QHBoxLayout(centralWidget);
	centralLayout->setContentsMargins(0, 0, 0, 0); 
	canvasTabWidget = new QTabWidget(this);

	canvasTab = new QWidget();
	QHBoxLayout* canvasLayout = new QHBoxLayout(canvasTab);
	canvas = new Canvas(this);
	canvas->setFocusPolicy(Qt::NoFocus);
	canvas->setRenderHint(QPainter::Antialiasing);
	canvas->setWhatsThis(i18n("Canvas: This is where the turtle moves and draws when the program is running"));
	canvasLayout->addWidget(canvas);
        canvasLayout->setContentsMargins(0, 0, 0, 0);
	canvasTabWidget->insertTab(0, canvasTab, i18n("&Canvas"));

	QWidget* errorTab = new QWidget();
	QHBoxLayout* errorLayout = new QHBoxLayout(errorTab);
	errorDialog = new ErrorDialog(this);
	errorLayout->addWidget(errorDialog);
	canvasTabWidget->insertTab(1, errorTab, i18n("E&rrors"));

	// a widget stach with 2 layers: 1st with only a canvas, 2nd with the canvas/error tabs 
	stackedWidget = new QStackedWidget;
	stackedWidget->insertWidget(0, canvasTab);
	stackedWidget->insertWidget(1, canvasTabWidget);

	centralLayout->addWidget(stackedWidget);
	setCentralWidget(centralWidget);
}

void MainWindow::showErrorDialog(bool show)
{
	if (show) {
		// show the canvas and errors in a tab widget, focussing on the errors
		stackedWidget->setCurrentIndex(1);
		canvasTabWidget->insertTab(0, canvasTab, i18n("&Canvas"));
		canvasTabWidget->setCurrentIndex(1);
		actionCollection()->action(QStringLiteral("show_errors"))->setChecked(true);
	} else {
		// show the canvas only
		stackedWidget->insertWidget(0, canvasTab);
		stackedWidget->setCurrentIndex(0);
		actionCollection()->action(QStringLiteral("show_errors"))->setChecked(false);
	}
}


void MainWindow::setupDockWindows()
{
	editorDock = new LocalDockWidget(i18n("&Editor"), this);
	editorDock->setObjectName(QStringLiteral("editor"));
	QWidget* editorWrapWidget = new QWidget(editorDock);
	QHBoxLayout* editorDockLayout = new QHBoxLayout(editorWrapWidget);
 	editorDockLayout->setContentsMargins(MARGIN_SIZE, MARGIN_SIZE, MARGIN_SIZE, MARGIN_SIZE);
 	editorWrapWidget->setLayout(editorDockLayout);
// 	dock->setAllowedAreas(Qt::LeftDockWidgetArea | Qt::RightDockWidgetArea);
	editor = new Editor(editorWrapWidget);  // create this here to prevent crashes
	editorDockLayout->addWidget(editor);
	editorDock->setWidget(editorWrapWidget);
// 	editorDock->setFeatures(QDockWidget::DockWidgetMovable|QDockWidget::DockWidgetFloatable);
	addDockWidget(Qt::LeftDockWidgetArea, editorDock);
	editor->show();
	editor->setFocus();
	editor->setWhatsThis(i18n("Editor: Write your KTurtle commands here"));

	// Creating the debug window
	inspectorDock = new LocalDockWidget(i18n("&Inspector"), this);
	inspectorDock->setObjectName(QStringLiteral("inspector"));
	QWidget* inspectorWrapWidget = new QWidget(inspectorDock);
	QHBoxLayout* inspectorDockLayout = new QHBoxLayout(inspectorWrapWidget);
	inspectorDockLayout->setContentsMargins(MARGIN_SIZE, MARGIN_SIZE, MARGIN_SIZE, MARGIN_SIZE);
	inspectorWrapWidget->setLayout(inspectorDockLayout);
	inspector = new Inspector(inspectorWrapWidget);
	inspectorDockLayout->addWidget(inspector);
	inspectorDock->setWidget(inspectorWrapWidget);
	addDockWidget(Qt::RightDockWidgetArea, inspectorDock);
	inspector->setWhatsThis(i18n("Inspector: See information about variables and functions when the program runs"));
}

void MainWindow::setupEditor()
{
// 	editor->setTranslator(Translator::instance());
	connect(editor, &Editor::modificationChanged, this, &MainWindow::updateModificationState);
	connect(editor, &Editor::contentNameChanged, this, &MainWindow::updateContentName);
	connect(editor, &Editor::fileOpened, this, &MainWindow::addToRecentFilesList);
	connect(editor, &Editor::fileSaved, this, &MainWindow::addToRecentFilesList);
	connect(editor, &Editor::cursorPositionChanged, this, &MainWindow::updateOnCursorPositionChange);
}

void MainWindow::setupInterpreter()
{
	interpreter = new Interpreter(this, false);
	connect(interpreter, &Interpreter::finished, this, &MainWindow::abort);
	Executer* executer = interpreter->getExecuter();

	// the code to connect the executer with the canvas is auto generated:
#include "interpreter/gui_connect.inc"
	connect(interpreter, &Interpreter::treeUpdated, inspector, &Inspector::updateTree);

	toggleGuiFeedback(true);
}

void MainWindow::toggleGuiFeedback(bool b)
{
	Executer* executer = interpreter->getExecuter();
	if (b) {
		connect(executer, &Executer::currentlyExecuting, editor, &Editor::markCurrentWord);
		connect(executer, &Executer::currentlyExecuting, inspector, &Inspector::markTreeNode);
			
		connect(executer, &Executer::variableTableUpdated, inspector, &Inspector::updateVariable);
		connect(executer, &Executer::functionTableUpdated, inspector, &Inspector::updateFunction);
	} else {
		disconnect(executer, &Executer::currentlyExecuting, editor, &Editor::markCurrentWord);
		disconnect(executer, &Executer::currentlyExecuting, inspector, &Inspector::markTreeNode);
		
		disconnect(executer, &Executer::variableTableUpdated,
			inspector, &Inspector::updateVariable);
		disconnect(executer, &Executer::functionTableUpdated,
			inspector, &Inspector::updateFunction);
		editor->removeMarkings();
	}
}

void MainWindow::setupStatusBar()
{
	statusBarLanguageLabel = new QLabel(statusBar());
	statusBar()->addPermanentWidget(statusBarLanguageLabel, 0);
	statusBarLanguageLabel->setAlignment(Qt::AlignRight);

	statusBarPositionLabel = new QLabel(statusBar());
	statusBar()->addPermanentWidget(statusBarPositionLabel, 0);
	statusBarPositionLabel->setAlignment(Qt::AlignRight);

	statusBarOverwriteModeLabel = new QLabel(statusBar());
	statusBar()->addPermanentWidget(statusBarOverwriteModeLabel, 0);
	statusBarOverwriteModeLabel->setAlignment(Qt::AlignRight);

	statusBarFileNameLabel = new QLabel(statusBar());
	statusBar()->addPermanentWidget(statusBarFileNameLabel, 0);
	statusBarFileNameLabel->setAlignment(Qt::AlignRight);

	toggleOverwriteMode(false);
	updateOnCursorPositionChange();
}

void MainWindow::saveNewToolbarConfig()
{
	// this destroys our actions lists ...
	KXmlGuiWindow::saveNewToolbarConfig();
	// ... so plug them again
	updateLanguagesMenu();
	updateExamplesMenu();
}

void MainWindow::updateLanguagesMenu()
{
	QList<QAction *> languageList;
	QActionGroup* languageGroup = new QActionGroup(this);
	connect(languageGroup, &QActionGroup::triggered, this, &MainWindow::setLanguage);
	QAction* a;
	// sort the dictionaries using an algorithm found in the qt docs:
	QMap<QString, QString> map;
	QSet<QString> dictionaries = KLocalizedString::availableApplicationTranslations();
	foreach (const QString &lang_code, dictionaries)
		map.insert(codeToFullName(lang_code), lang_code);
	// populate the menu:
	foreach (const QString &lang_code, map) {
		a = new QAction(codeToFullName(lang_code), actionCollection());
		a->setData(lang_code);
		a->setStatusTip(i18n("Switch to the %1 dictionary", codeToFullName(lang_code)));
		a->setCheckable(true);
		if (lang_code == currentLanguageCode) {
			a->setChecked(true);
		}
		//languageMenu->addAction(a);
		languageGroup->addAction(a);
		languageList.append(a);
	}
	unplugActionList (QStringLiteral("languages_actionlist"));
	plugActionList   (QStringLiteral("languages_actionlist"), languageList);
}

void MainWindow::updateExamplesMenu()
{
	QAction * newExample;
	QString actionName;
	QList<QAction*> exampleList;
	QActionGroup* exampleGroup = new QActionGroup (this);

	foreach (const QString &exampleName, Translator::instance()->exampleNames()) {
		newExample = new QAction (exampleName, this);
		newExample->setData(exampleName);
		exampleGroup->addAction (newExample);

		connect(newExample, &QAction::triggered, this, &MainWindow::openExample);
		exampleList.append (newExample);
	}

	QStringList allExamples;
	const QStringList exampleDirs = QStandardPaths::locateAll(QStandardPaths::GenericDataLocation, GHNS_TARGET, QStandardPaths::LocateDirectory);
	foreach (const QString &dir, exampleDirs) {
		const QStringList fileNames = QDir(dir).entryList(QStringList() << QStringLiteral("*.turtle"), QDir::Files);
		foreach (const QString &fileName, fileNames) {
			allExamples.append(dir + '/' + fileName);
		}
	}

	if(allExamples.size()>0) {
		newExample = new QAction(this);
		newExample->setSeparator(true);
		exampleGroup->addAction(newExample);
		exampleList.append(newExample);
	}

	foreach(const QString& exampleFilename, allExamples) {
		QFileInfo fileInfo(exampleFilename);
		newExample = new QAction (fileInfo.baseName(), this);
		newExample->setData(exampleFilename);
		exampleGroup->addAction (newExample);
		exampleList.append (newExample);
			
		connect(newExample, &QAction::triggered, this, &MainWindow::openDownloadedExample);
	}

	unplugActionList (QStringLiteral("examples_actionlist"));
	plugActionList   (QStringLiteral("examples_actionlist"), exampleList);
}

void MainWindow::addToRecentFilesList(const QUrl &url)
{
	recentFilesAction->addUrl(url);
}

void MainWindow::openExample()
{
	QAction* action = qobject_cast<QAction*>(sender());
	QString exampleName = action->data().toString();
	editor->openExample(Translator::instance()->example(exampleName), exampleName);
}

void MainWindow::openDownloadedExample()
{
	QAction* action = qobject_cast<QAction*>(sender());
	QString exampleFilename = action->data().toString();
	editor->openFile(QUrl::fromLocalFile(exampleFilename));
}

void MainWindow::toggleOverwriteMode(bool b)
{
	statusBarOverwriteModeLabel->setText(b ? i18n(" OVR ") : i18n(" INS "));
	editor->setOverwriteMode(b);
}

void MainWindow::updateContextHelpAction(const QString& s, const QString& anchor)
{
	//qDebug() << QString("%1 (help anchor: %2)").arg(s).arg(anchor);
	contextHelpAnchor = anchor;
	contextHelpString = s.isEmpty() ? i18n("<nothing under cursor>") : s;
	contextHelpAct->setText(i18n("Help on: %1", contextHelpString));
}

void MainWindow::updateOnCursorPositionChange()
{
	statusBarPositionLabel->setText(i18n(" Line: %1 Column: %2 ", editor->row(), editor->col()));

	Token* cursorToken = editor->currentToken();
	QString desc;
	if (cursorToken) {
		QString look = cursorToken->look();
		int cat = cursorToken->category();
		delete cursorToken;
		cursorToken = nullptr;
		KLocalizedString layout = ki18n("\"%1\" <%2>");
		switch (cat) {
			// not showing the look (only the name):
			case Token::VariableCategory:     updateContextHelpAction(i18n("<variable>"), QStringLiteral("variable")); return;
			case Token::NumberCategory:       updateContextHelpAction(i18n("<number>"), QStringLiteral("number"));     return;
			case Token::CommentCategory:      updateContextHelpAction(i18n("<comment>"), QStringLiteral("comment"));   return;
			case Token::StringCategory:       updateContextHelpAction(i18n("<string>"), QStringLiteral("string"));     return;
			// only showing the look:
			case Token::LearnCommandCategory: updateContextHelpAction(look, QStringLiteral("learn"));                  return;
			case Token::TrueFalseCategory:    updateContextHelpAction(look, QStringLiteral("boolean"));                return;
			// showing the look and the name:
			case Token::ScopeCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("scope")).toString(), QStringLiteral("scope")); return;
			case Token::AssignmentCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("assignment")).toString(), QStringLiteral("assignment")); return;
			case Token::ParenthesisCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("parenthesis")).toString(), QStringLiteral("parenthesis")); return;
			case Token::MathOperatorCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("mathematical operator")).toString(), QStringLiteral("math-operator")); return;
			case Token::ExpressionCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("expression")).toString(), QStringLiteral("expression")); return;
			case Token::BooleanOperatorCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("boolean operator")).toString(), QStringLiteral("boolean-operator")); return;
			case Token::FunctionCallCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("learned command")).toString(), QStringLiteral("learned-command")); return;
			case Token::ArgumentSeparatorCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("argument separator")).toString(), QStringLiteral("argument-separator")); return;
			// showing the look and the name, and linking to the help through their default look (en_US):
			case Token::CommandCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("command")).toString(), Translator::instance()->defaultLook(look));
				return;
			case Token::ControllerCommandCategory:
				updateContextHelpAction(layout.subs(look).subs(i18n("controller command")).toString(), Translator::instance()->defaultLook(look));
				return;
		}
	}
	updateContextHelpAction();  // display the 'nothing under cursor thing'
}


void MainWindow::setLanguage(QAction *action)
{
	if (setCurrentLanguage(action->data().toString()))
		action->setChecked(true);
}

bool MainWindow::setCurrentLanguage(const QString &lang_code)  // 2 or 5 digit code (en, en_US, nl, pt_BR)
{
	bool result = false;
	//qDebug() << "MainWindow::setCurrentLanguage: " << lang_code;
	if (Translator::instance()->setLanguage(lang_code)) {
		currentLanguageCode = lang_code;
		statusBarLanguageLabel->setText(' ' + codeToFullName(lang_code) + ' ');
		updateExamplesMenu();
		editor->rehighlight();
		result = true;
	} else {
		KMessageBox::error(this, i18n("Could not change the language to %1.", codeToFullName(lang_code)));
	}
	return result;
}

QString MainWindow::codeToFullName(const QString& lang_code)
{
	return QString(lang_code == QLatin1String("en_US") ?
			i18n("English [built in]") :
			i18n("%1 (%2)", QLocale(lang_code.left(2)).nativeLanguageName(), lang_code)
		);
}


void MainWindow::run()
{
	if (interpreter->state() == Interpreter::Uninitialized ||
	    interpreter->state() == Interpreter::Finished ||
	    interpreter->state() == Interpreter::Aborted) {
		// reset inspector and interpreter
		editor->removeMarkings();
		inspector->clear();
		errorDialog->clear();
		showErrorDialog(false);
		interpreter->initialize(editor->content());
	}
	editor->disable();
	console->disable();
	executeConsoleAct->setEnabled(false);
	toggleGuiFeedback(runSpeed != 0);

	// start parsing (always in full speed)
	iterationTimer->setSingleShot(false);
	iterationTimer->start(0);
}

QString MainWindow::execute(const QString &operation)
{
	disconnect(interpreter, &Interpreter::finished, this, &MainWindow::abort);
	disconnect(interpreter, &Interpreter::treeUpdated, inspector, &Inspector::updateTree);
	Executer* executer = interpreter->getExecuter();
	disconnect(executer, &Executer::currentlyExecuting, editor, &Editor::markCurrentWord);
	disconnect(executer, &Executer::currentlyExecuting, inspector, &Inspector::markTreeNode);
	disconnect(executer, &Executer::variableTableUpdated,
		inspector, &Inspector::updateVariable);
	disconnect(executer, &Executer::functionTableUpdated,
		inspector, &Inspector::updateFunction);

	if (interpreter->state() == Interpreter::Uninitialized ||
	    interpreter->state() == Interpreter::Finished ||
	    interpreter->state() == Interpreter::Aborted) {
		interpreter->initialize(operation);
	}

	runAct->setEnabled(false);
	pauseAct->setEnabled(false);
	abortAct->setEnabled(false);

	currentlyRunningConsole = true;

	while (!(interpreter->state() == Interpreter::Finished ||
	         interpreter->state() == Interpreter::Aborted)) {
		interpreter->interpret();
	}
	
	currentlyRunningConsole = false;

	runAct->setEnabled(true);
	pauseAct->setEnabled(false);
	abortAct->setEnabled(false);

	QString errorMessage;

	if (interpreter->encounteredErrors()) {
		ErrorList* errorList = interpreter->getErrorList();
		//qDebug() << errorList->first().text();
		errorMessage = errorList->first().text();
	}

	connect(interpreter, &Interpreter::finished, this, &MainWindow::abort);
	connect(interpreter, &Interpreter::treeUpdated, inspector, &Inspector::updateTree);
	connect(executer, &Executer::currentlyExecuting, editor, &Editor::markCurrentWord);
	connect(executer, &Executer::currentlyExecuting, inspector, &Inspector::markTreeNode);
	connect(executer, &Executer::variableTableUpdated, inspector, &Inspector::updateVariable);
	connect(executer, &Executer::functionTableUpdated, inspector, &Inspector::updateFunction);

	return errorMessage;
}

void MainWindow::iterate()
{
	if (interpreter->state() == Interpreter::Finished || interpreter->state() == Interpreter::Aborted) {
		abort();
		return;
	}

	runAct->setEnabled(false);
	pauseAct->setChecked(false);
	pauseAct->setEnabled(true);
	abortAct->setEnabled(true);

	if (interpreter->state() == Interpreter::Executing) {
		iterationTimer->stop();
		iterationTimer->setSingleShot(true);
		switch (runSpeed) {
			case 0: iterationTimer->start(0);    break;
			case 1: iterationTimer->start(0);    break;
			case 2: iterationTimer->start(500);  break;
			case 3: iterationTimer->start(1000); break;
			case 4: iterationTimer->start(3000); break;
			case 5:
				iterationTimer->stop();
				interpreter->interpret();
				pauseAct->setChecked(true);
				pause();
				return;
		}
	}
	interpreter->interpret();
}

void MainWindow::pause()
{
	if (pauseAct->isChecked()) {
		runAct->setEnabled(true);
		iterationTimer->stop();
		return;
	}
	iterate();
}

void MainWindow::abort()
{
	iterationTimer->stop();
	interpreter->abort();

	editor->removeMarkings();
	inspector->clearAllMarks();

	runAct->setEnabled(true);
	pauseAct->setChecked(false);
	pauseAct->setEnabled(false);
	abortAct->setEnabled(false);

	editor->enable();
	console->enable();
	executeConsoleAct->setEnabled(true);

	if (interpreter->encounteredErrors()) {
		errorDialog->setErrorList(interpreter->getErrorList());
		showErrorDialog(true);
	}
}


void MainWindow::updateContentName(const QString& str)
{
	QString caption = str.isEmpty() ? i18n("untitled") : str;
	bool modified = editor->isModified();
	setWindowTitle(caption + QLatin1String("[*]"));
	setWindowModified(modified);
	statusBarFileNameLabel->setText(QStringLiteral(" %1%2 ").arg(caption).arg(modified ? "*" : ""));
}

void MainWindow::addToRecentFiles(const QUrl &url)
{
	recentFilesAction->addUrl(url);
}


void MainWindow::readConfig()
{
	KConfigGroup config(KSharedConfig::openConfig(), "General Options");
// 	m_paShowStatusBar->setChecked(config->readEntry("ShowStatusBar", QVariant(false)).toBool());
// 	m_paShowPath->setChecked(config->readEntry("ShowPath", QVariant(false)).toBool());
	recentFilesAction->loadEntries(KSharedConfig::openConfig()->group("Recent Files"));
	QString lang_code(config.readEntry("currentLanguageCode", QVariant(QString())).toString());
	if (lang_code.isEmpty()) lang_code = QStringLiteral("en_US");  // null-string are saved as empty-strings
	setCurrentLanguage(lang_code);
// 	if(m_paShowStatusBar->isChecked())
// 		statusBar()->show();
// 	else
// 		statusBar()->hide();
}

void MainWindow::writeConfig()
{
	KConfigGroup config(KSharedConfig::openConfig(), "General Options");
// 	config.writeEntry("ShowStatusBar",m_paShowStatusBar->isChecked());
// 	config.writeEntry("ShowPath",m_paShowPath->isChecked());
	recentFilesAction->saveEntries(KSharedConfig::openConfig()->group( "Recent Files"));
	config.writeEntry("currentLanguageCode", currentLanguageCode);
	config.sync();
}

void MainWindow::exportToPng()
{
	// copied from edit code for file selection
	QUrl url = QFileDialog::getSaveFileUrl(this,
					       i18n("Save as Picture"),
					       QUrl(),
					       QStringLiteral("%1 (*.png);;%2 (*)").arg(i18n("PNG Images")).arg(i18n("All files")));
	if (url.isEmpty())
		return;
	// get our image from the canvas and save to png
	QImage pict = canvas->getPicture();
	if (url.isLocalFile()) {
		pict.save(url.toLocalFile(), "PNG");
	} else {
		pict.save(url.path(), "PNG");
	}
}

void MainWindow::exportToSvg()
{
	// copied from edit code for file selection
	// canvas->saveAsSvg() does not handle QUrl, so only local files are accepted
	QString path = QFileDialog::getSaveFileName(this, i18n("Save as SVG"), QString(), QStringLiteral("%1 (.*svg);;%2 (*)").arg(i18n("Scalable Vector Graphics")).arg(i18n("All files")));
	if (path.isEmpty())
		return;
	canvas->saveAsSvg(windowTitle(), path);
}

void MainWindow::exportToHtml()
{
	// copied from edit code for file selection
	// we do not handle QUrl, so only local files are accepted
	QString path = QFileDialog::getSaveFileName(this, i18n("Save code as HTML"), QString(), QStringLiteral("%1 (*.html);;%2 (*)").arg(i18n("HTML documents")).arg(i18n("All files")));
	if (path.isEmpty())
		return;
	QSaveFile file(path);
	if (!file.open(QIODevice::WriteOnly))
		return;
	QTextStream out(&file);
	out << editor->toHtml(windowTitle(), currentLanguageCode);
	out.flush();
	file.commit();
}


// slots for logo functions that need to use the MainWindow class:

void MainWindow::slotInputDialog(QString& value)
{
	iterationTimer->stop();
	value = QInputDialog::getText(this, i18n("Input"), i18n("Input"), QLineEdit::Normal, value);
	
	if(!currentlyRunningConsole)
		run();
}

void MainWindow::slotMessageDialog(const QString& text)
{
	iterationTimer->stop();
	KMessageBox::information(this, text, i18n("Message"));
	if(!currentlyRunningConsole)
		run();
}

void MainWindow::getNewExampleDialog()
{
	QPointer<KNS3::DownloadDialog> dialog = new KNS3::DownloadDialog(this);
	dialog->exec();
	updateExamplesMenu();
	delete dialog;
}
