== NetworkManager 1.0/1.2 ==

* New interfaces:
  - org.freedesktop.NetworkManager.Device.IPTunnel
  - org.freedesktop.NetworkManager.Device.Vxlan

* New properties/slots/signals:
  - org.freedesktop.NetworkManager
    - GetAllDevices ( ) → ao
        The list of both realized and un-realized network devices. Un-realized devices are software devices which do not yet have backing resources,
        but for which backing resources can be created if the device is activated.
    - GlobalDnsConfiguration - a{sv} - (readwrite)
        Dictionary of global DNS settings where the key is one of "searches", "options" and "domains". The values for the "searches" and "options"
        keys are string arrays describing the list of search domains and resolver options, respectively. The value of the "domains" key is a second-level
        dictionary, where each key is a domain name, and each key's value is a third-level dictionary with the keys "servers" and "options". "servers" is
        a string array of DNS servers, "options" is a string array of domain-specific options.
  - org.freedesktop.NetworkManager.Device.Wired
    - S390Subchannels - as - (read)
        Array of S/390 subchannels for S/390 or z/Architecture devices.
  - org.freedesktop.NetworkManager.Device
    - LldpNeighbors - aa{sv} - (read)
        Array of LLDP neighbors; each element is a dictionary mapping LLDP TLV names to variant boxed values.
    - Real - b - (read)
        True if the device exists, or False for placeholder devices that do not yet exist but could be automatically
        created by NetworkManager if one of their AvailableConnections was activated.
    - Reapply ( a{sa{sv}}: connection, t: version_id, u: flags ) → nothing
        Attempts to update the configuration of a device without deactivating it. NetworkManager has the concept of connections,
        which are profiles that contain the configuration for a networking device. Those connections are exposed via D-Bus as individual
        objects that can be created, modified and deleted. When activating such a settings-connection on a device, the settings-connection
        is cloned to become an applied-connection and used to configure the device (see GetAppliedConnection). Subsequent modification of
        the settings-connection don't propagate automatically to the device's applied-connection (with exception of the firewall-zone and
        the metered property). For the changes to take effect, you can either re-activate the settings-connection, or call Reapply. The Reapply
        call allows you to directly update the applied-connection and reconfigure the device. Reapply can also be useful if the currently
        applied-connection is equal to the connection that is about to be reapplied. This allows to reconfigure the device and revert external
        changes like removing or adding an IP address (which NetworkManager doesn't revert automatically because it is assumed that the user made
        these changes intentionally outside of NetworkManager). Reapply can make the applied-connection different from the settings-connection,
        just like updating the settings-connection can make them different.
    - GetAppliedConnection ( u: flags ) → a{sa{sv}}
        Get the currently applied connection on the device. This is a snapshot of the last activated connection on the device, that is the configuration
        that is currently applied on the device. Usually this is the same as GetSettings of the referenced settings connection. However, it can differ if
        the settings connection was subsequently modified or the applied connection was modified by Reapply. The applied connection is set when activating
        a device or when calling Reapply.

* New settings and settings properties:
  - bridge setting
    - mac-address
    - multicast-snooping
  - connection setting
    - lldp
  - dcb setting
  - ip-tunnel setting
  - ipv4 setting
    - address-data
    - dad-timeout
    - dhcp-fqdn
    - dns-options
  - ipv6 setting
    - address-data
    - dad-timeout
    - dhcp-fqdn
    - dns-options
    - route-data
    - route-metrics
  - gsm setting
    - sim-id
    - sim-operator-id
  - team-port setting
  - vpn setting
    - persistent
  - vxlan setting
  - wired setting
    - wake-on-lan
    - wake-on-lan-password
  - 802-11-wireless setting
    - powersave
