## Name

rndc — name server control utility

## Synopsis

`rndc` [`-b `source-address``] [`-c `config-file``] [`-k `key-file``] [`-s `server``] [`-p `port``] [`-V`] [`-y `key_id``] {command}

## DESCRIPTION

rndc controls the operation of a name server. It supersedes the ndc utility that was provided in old BIND releases. If rndc is invoked with no command line options or arguments, it prints a short summary of the supported commands and the available options and their arguments.

rndc communicates with the name server over a TCP connection, sending commands authenticated with digital signatures. In the current versions of rndc and named, the only supported authentication algorithm is HMAC-MD5, which uses a shared secret on each end of the connection. This provides TSIG-style authentication for the command request and the name server's response. All commands sent over the channel must be signed by a key_id known to the server.

rndc reads a configuration file to determine how to contact the name server and decide what algorithm and key it should use.

## OPTIONS

-b `source-address`

  Use `source-address` as the source address for the connection to the server. Multiple instances are permitted to allow setting of both the IPv4 and IPv6 source addresses.

-c `config-file`

  Use `config-file` as the configuration file instead of the default, `/etc/rndc.conf`.

-k `key-file`

  Use `key-file` as the key file instead of the default, `/etc/rndc.key`. The key in `/etc/rndc.key` will be used to authenticate commands sent to the server if the `config-file` does not exist.

-s `server`

  `server` is the name or address of the server which matches a server statement in the configuration file for rndc. If no server is supplied on the command line, the host named by the default-server clause in the options statement of the rndc configuration file will be used.

-p `port`

  Send commands to TCP port `port` instead of BIND 9's default control channel port, 953.

-V

  Enable verbose logging.

-y `key_id`

  Use the key `key_id` from the configuration file. `key_id` must be known by named with the same algorithm and secret string in order for control message validation to succeed. If no `key_id` is specified, rndc will first look for a key clause in the server statement of the server being used, or if no server statement is present for that host, then the default-key clause of the options statement. Note that the configuration file contains shared secrets which are used to send authenticated control commands to name servers. It should therefore not have general read or write access.

## COMMANDS

A list of commands supported by rndc can be seen by running rndc without arguments.

Currently supported commands are:

`addzone `zone` [`class` [`view`]] `configuration``

  Add a zone while the server is running. This command requires the allow-new-zones option to be set to `yes`. The `configuration` string specified on the command line is the zone configuration text that would ordinarily be placed in `named.conf`.

  The configuration is saved in a file called ``hash`.nzf`, where `hash` is a cryptographic hash generated from the name of the view. When named is restarted, the file will be loaded into the view configuration, so that zones that were added can persist after a restart.

  This sample addzone command would add the zone `example.com` to the default view:

  `$` `rndc addzone example.com '{ type master; file "example.com.db"; };'`

  (Note the brackets and semi-colon around the zone configuration text.)

  See also rndc delzone.

`delzone `zone` [`class` [`view`]]`

  Delete a zone while the server is running. Only zones that were originally added via rndc addzone can be deleted in this manner.

  See also rndc addzone

`dumpdb [-all|-cache|-zone|-adb|-bad] [`view ...`]`

  Dump the server's caches (default) and/or zones to the dump file for the specified views. If no view is specified, all views are dumped. (See the dump-file option in the BIND 9 Administrator Reference Manual.)

`flush`

  Flushes the server's cache.

`flushname` `name` [`view`]

  Flushes the given name from the view's DNS cache and, if applicable, from the view's nameserver address database or bad-server cache.

`flushtree` `name` [`view`]

  Flushes the given name, and all of its subdomains, from the view's DNS cache. Note that this does not affect he server's address database or bad-server cache.

`freeze [`zone` [`class` [`view`]]]`

  Suspend updates to a dynamic zone. If no zone is specified, then all zones are suspended. This allows manual edits to be made to a zone normally updated by dynamic update. It also causes changes in the journal file to be synced into the master file. All dynamic update attempts will be refused while the zone is frozen.

  See also rndc thaw.

`halt [-p]`

  Stop the server immediately. Recent changes made through dynamic update or IXFR are not saved to the master files, but will be rolled forward from the journal files when the server is restarted. If `-p` is specified named's process id is returned. This allows an external process to determine when named had completed halting.

  See also rndc stop.

`loadkeys `zone` [`class` [`view`]]`

  Fetch all DNSSEC keys for the given zone from the key directory. If they are within their publication period, merge them into the zone's DNSKEY RRset. Unlike rndc sign, however, the zone is not immediately re-signed by the new keys, but is allowed to incrementally re-sign over time.

  This command requires that the auto-dnssec zone option be set to `maintain`, and also requires the zone to be configured to allow dynamic DNS. (See "Dynamic Update Policies" in the Administrator Reference Manual for more details.)

`notify `zone` [`class` [`view`]]`

  Resend NOTIFY messages for the zone.

`notrace`

  Sets the server's debugging level to 0.

  See also rndc trace.

`querylog` [on|off]

  Enable or disable query logging. (For backward compatibility, this command can also be used without an argument to toggle query logging on and off.)

  Query logging can also be enabled by explicitly directing the queries category to a channel in the logging section of `named.conf` or by specifying querylog yes; in the options section of `named.conf`.

`reconfig`

  Reload the configuration file and load new zones, but do not reload existing zone files even if they have changed. This is faster than a full reload when there is a large number of zones because it avoids the need to examine the modification times of the zones files.

`recursing`

  Dump the list of queries named is currently recursing on, and the list of domains to which iterative queries are currently being sent. (The second list includes the number of fetches currently active for the given domain, and how many have been passed or dropped because of the `fetches-per-zone` option.)

`refresh `zone` [`class` [`view`]]`

  Schedule zone maintenance for the given zone.

`reload`

  Reload configuration file and zones.

`reload `zone` [`class` [`view`]]`

  Reload the given zone.

`retransfer `zone` [`class` [`view`]]`

  Retransfer the given slave zone from the master server.

  If the zone is configured to use inline-signing, the signed version of the zone is discarded; after the retransfer of the unsigned version is complete, the signed version will be regenerated with all new signatures.

`secroots [`view ...`]`

  Dump the server's security roots to the secroots file for the specified views. If no view is specified, security roots for all views are dumped.

`sign `zone` [`class` [`view`]]`

  Fetch all DNSSEC keys for the given zone from the key directory (see the key-directory option in the BIND 9 Administrator Reference Manual). If they are within their publication period, merge them into the zone's DNSKEY RRset. If the DNSKEY RRset is changed, then the zone is automatically re-signed with the new key set.

  This command requires that the auto-dnssec zone option be set to `allow` or `maintain`, and also requires the zone to be configured to allow dynamic DNS. (See "Dynamic Update Policies" in the Administrator Reference Manual for more details.)

  See also rndc loadkeys.

`signing [( -list | -clear `keyid/algorithm` | -clear `all` | -nsec3param ( `parameters` | `none` ) ) ] `zone` [`class` [`view`]]`

  List, edit, or remove the DNSSEC signing state records for the specified zone. The status of ongoing DNSSEC operations (such as signing or generating NSEC3 chains) is stored in the zone in the form of DNS resource records of type sig-signing-type. rndc signing -list converts these records into a human-readable form, indicating which keys are currently signing or have finished signing the zone, and which NSEC3 chains are being created or removed.

  rndc signing -clear can remove a single key (specified in the same format that rndc signing -list uses to display it), or all keys. In either case, only completed keys are removed; any record indicating that a key has not yet finished signing the zone will be retained.

  rndc signing -nsec3param sets the NSEC3 parameters for a zone. This is the only supported mechanism for using NSEC3 with inline-signing zones. Parameters are specified in the same format as an NSEC3PARAM resource record: hash algorithm, flags, iterations, and salt, in that order.

  Currently, the only defined value for hash algorithm is `1`, representing SHA-1. The `flags` may be set to `0` or `1`, depending on whether you wish to set the opt-out bit in the NSEC3 chain. `iterations` defines the number of additional times to apply the algorithm when generating an NSEC3 hash. The `salt` is a string of data expressed in hexadecimal, or a hyphen (`-') if no salt is to be used.

  So, for example, to create an NSEC3 chain using the SHA-1 hash algorithm, no opt-out flag, 10 iterations, and a salt value of "FFFF", use: rndc signing -nsec3param 1 0 10 FFFF `zone`. To set the opt-out flag, 15 iterations, and no salt, use: rndc signing -nsec3param 1 1 15 - `zone`.

  rndc signing -nsec3param none removes an existing NSEC3 chain and replaces it with NSEC.

`stats`

  Write server statistics to the statistics file. (See the statistics-file option in the BIND 9 Administrator Reference Manual.)

`status`

  Display status of the server. Note that the number of zones includes the internal bind/CH zone and the default ./IN hint zone if there is not an explicit root zone configured.

`stop [-p]`

  Stop the server, making sure any recent changes made through dynamic update or IXFR are first saved to the master files of the updated zones. If `-p` is specified named's process id is returned. This allows an external process to determine when named had completed stopping.

  See also rndc halt.

`sync [-clean] [`zone` [`class` [`view`]]]`

  Sync changes in the journal file for a dynamic zone to the master file. If the "-clean" option is specified, the journal file is also removed. If no zone is specified, then all zones are synced.

`thaw [`zone` [`class` [`view`]]]`

  Enable updates to a frozen dynamic zone. If no zone is specified, then all frozen zones are enabled. This causes the server to reload the zone from disk, and re-enables dynamic updates after the load has completed. After a zone is thawed, dynamic updates will no longer be refused. If the zone has changed and the ixfr-from-differences option is in use, then the journal file will be updated to reflect changes in the zone. Otherwise, if the zone has changed, any existing journal file will be removed.

  See also rndc freeze.

`trace`

  Increment the servers debugging level by one.

`trace `level``

  Sets the server's debugging level to an explicit value.

  See also rndc notrace.

`tsig-delete` `keyname` [`view`]

  Delete a given TKEY-negotiated key from the server. (This does not apply to statically configured TSIG keys.)

`tsig-list`

  List the names of all TSIG keys currently configured for use by named in each view. The list both statically configured keys and dynamic TKEY-negotiated keys.

`validation ( on | off | check ) [`view ...`]`

  Enable, disable, or check the current status of DNSSEC validation. Note dnssec-enable also needs to be set to `yes` or `auto` to be effective. It defaults to enabled.

## LIMITATIONS

There is currently no way to provide the shared secret for a `key_id` without using the configuration file.

Several error messages could be clearer.

## SEE ALSO

rndc.conf(5) , rndc-confgen(8) , named(8) , named.conf(5) , ndc(8) , BIND 9 Administrator Reference Manual.