## Release Notes for BIND Version 9.12.0rc1

### Introduction

BIND 9.12.0 is a new feature release of BIND, still under development. This document summarizes new features and functional changes that have been introduced on this branch. With each development release leading up to the final BIND 9.12.0 release, this document will be updated with additional features added and bugs fixed.

### Download

The latest versions of BIND 9 software can always be found at http://www.isc.org/downloads/. There you will find additional information about each release, source code, and pre-compiled versions for Microsoft Windows operating systems.

### License Change

With the release of BIND 9.11.0, ISC changed to the open source license for BIND from the ISC license to the Mozilla Public License (MPL 2.0).

The MPL-2.0 license requires that if you make changes to licensed software (e.g. BIND) and distribute them outside your organization, that you publish those changes under that same license. It does not require that you publish or disclose anything other than the changes you made to our software.

This requirement will not affect anyone who is using BIND, with or without modifications, without redistributing it, nor anyone redistributing it without changes. Therefore, this change will be without consequence for most individuals and organizations who are using BIND.

Those unsure whether or not the license change affects their use of BIND, or who wish to discuss how to comply with the license may contact ISC at https://www.isc.org/mission/contact/.

### Legacy Windows No Longer Supported

As of BIND 9.11.2, Windows XP and Windows 2003 are no longer supported platforms for BIND; "XP" binaries are no longer available for download from ISC.

### Security Fixes

- None.

### New Features

- Many aspects of named have been modified to improve query performance, and in particular, performance for delegation-heavy zones:

  - The additional cache ("acache") was found not to significantly improve performance and has been removed. As a result, the acache-enable and acache-cleaning-interval options no longer have any effect. For backwards compatibility, BIND will accept their presence in a configuration file, but will log a warning.

  - In place of the acache, named can now use a glue cache to speed up retrieval of glue records when sending delegation responses. Unlike acache, this feature is on by default; use glue-cache no; to disable it.

  - minimal-responses is now set to `no-auth-recursive` by default.

  - The additional-from-cache and additional-from-auth options no longer have any effect. named will log a warning if they are set.

  - Several functions have been refactored to improve performance, including name compression, owner name case restoration, hashing, and buffers.

  - When built with default configure options, named no longer fills memory with tag values when allocating or freeing it. This improves performance, but makes it more difficult to debug certain memory-related errors. The default is reversed if building with developer options. named -M fill or named -M nofill will set the behavior accordingly regardless of build options.

- Several areas of code have been refactored for improved readability, maintainability, and testability:

  - The named query logic implemented in query_find() has been split into smaller functions with a context structure to maintain state between them, and extensive comments have been added. [RT #43929]

  - Similarly the iterative query logic implemented in resquery_response() function has been split into smaller functions and comments added. [RT #45362]

- Code implementing name server query processing has been moved from named to an external library, libns. This will make it easier to write unit tests for the code, or to link it into new tools. [RT #45186]

- named can now synthesize negative responses (NXDOMAIN, NODATA, or wildcard answers) from cached DNSSEC-verified records that were returned in negative or wildcard responses from authoritative servers.

  This will reduce query loads on authoritative servers for signed domains: when existing cached records can be used by the resolver to determine that a name does not exist in the authorittive domain, no query needs to be sent. Reducing the number of iterative queries should also improve resolver performance.

  This behavior is controlled by the new `named.conf` option synth-from-dnssec. It is enabled by default.

  Note: this currently only works for zones signed using NSEC. Support for zones signed using NSEC3 (without opt-out) is planned for the future.

  Thanks to APNIC for sponsoring this work.

- When acting as a recursive resolver, named can now continue returning answers whose TTLs have expired when the authoritative server is under attack and unable to respond. This is controlled by the stale-answer-enable, stale-answer-ttl and max-stale-ttl options. [RT #44790]

- The DNS Response Policy Service (DNSRPS) API, a mechanism to allow named to use an external response policy provider, is now supported. (One example of such a provider is "FastRPZ" from Farsight Security, Inc.) This allows the same types of policy filtering as standard RPZ, but can reduce the workload for named, particularly when using large and frequently-updated policy zones. It also enables named to share response policy providers with other DNS implementations such as Unbound.

  This feature is avaiable if BIND is built with configure --enable-dnsrps, if a DNSRPS provider is installed, and if dnsrps-enable is set to "yes" in `named.conf`. Standard built-in RPZ is used otherwise.

  Thanks to Vernon Schryver and Farsight Security for the contribution. [RT #43376]

- Setting max-journal-size to `default` limits journal sizes to twice the size of the zone contents. This can be overridden by setting max-journal-size to `unlimited` or to an explicit value up to 2G. Thanks to Tony Finch for the contribution. [RT #38324]

- dnstap logfiles can now be configured to automatically roll when they reach a specified size. If dnstap-output is configured with mode `file`, then it can take optional size and versions key-value arguments to set the logfile rolling parameters. (These have the same semantics as the corresponding options in a logging channel statement.) [RT #44502]

- Logging channels and dnstap-output files can now be configured with a suffix option, set to either `increment` or `timestamp`, indicating whether log files should be given incrementing suffixes when they roll over (e.g., `logfile.0`, `.1`, `.2`, etc) or suffixes indicating the time of the roll. The default is `increment`. [RT #42838]

- The print-time option in the logging configuration can now take arguments `local`, `iso8601` or `iso8601-utc` to indicate the format in which the date and time should be logged. For backward compatibility, `yes` is a synonym for `local`. [RT #42585]

- The new dnssec-cds command generates a new DS set to place in a parent zone, based on the contents of a child zone's validated CDS or CDNSKEY records. It can produce a `dsset` file suitable for input to dnssec-signzone, or a series of nsupdate commands to update the parent zone via dynamic DNS. Thanks to Tony Finch for the contribution. [RT #46090]

- nsupdate and rndc now accept command line options -4 and -6 which force using only IPv4 or only IPv6, respectively. [RT #45632]

- nsec3hash -r ("rdata order") takes arguments in the same order as they appear in NSEC3 or NSEC3PARAM records. This makes it easier to generate an NSEC3 hash using values cut and pasted from an existing record. Thanks to Tony Finch for the contribution. [RT #45183]

- The new-zones-directory option allows named to store configuration parameters for zones added via rndc addzone in a location other than the working directory. Thanks to Petr Menšík of Red Hat for the contribution. [RT #44853]

- The dnstap-read -x option prints a hex dump of the wire format DNS message encapsulated in each dnstap log entry. [RT #44816]

- The host -A option returns most records for a name, but omits types RRSIG, NSEC and NSEC3.

- dig +ednsopt now accepts the names for EDNS options in addition to numeric values. For example, an EDNS Client-Subnet option could be sent using dig +ednsopt=ecs:.... Thanks to John Worley of Secure64 for the contribution. [RT #44461]

- Added support for the EDNS TCP Keepalive option (RFC 7828); this allows negotiation of longer-lived TCP sessions to reduce the overhead of setting up TCP for individual queries. [RT #42126]

- Added support for the EDNS Padding option (RFC 7830), which obfuscates packet size analysis when DNS queries are sent over an encrypted channel. [RT #42094]

- rndc commands which refer to zone names can now reference a zone of type redirect by using the special zone name "-redirect". (Previously this was not possible because redirect zones always have the name ".", which can be ambiguous.)

  In the event you need to manipulate a zone actually called "-redirect", use a trailing dot: "-redirect."

  Note: This change does not appply to the rndc addzone or rndc modzone commands.

- named-checkconf -l lists the zones found in `named.conf`. [RT #43154]

- Query logging now includes the ECS option, if one was present in the query, in the format "[ECS `address/source/scope`]".

- By default, BIND now uses the random number generation functions in the cryptographic library (i.e., OpenSSL or a PKCS#11 provider) as a source of high-quality randomness rather than `/dev/random`. This is suitable for virtual machine environments, which may have limited entropy pools and lack hardware random number generators.

  This can be overridden by specifying another entropy source via the random-device option in `named.conf`, or via the -r command line option. However, for functions requiring full cryptographic strength, such as DNSSEC key generation, this cannot be overridden. In particular, the -r command line option no longer has any effect on dnssec-keygen.

  This can be disabled by building with configure --disable-crypto-rand, in which case `/dev/random` will be the default entropy source. [RT #31459] [RT #46047]

- rndc managed-keys destroy shuts down all RFC 5011 DNSSEC trust anchor maintenance, and deletes any existing managed keys database. If immediately followed by rndc reconfig, this will reinitialize key maintenance just as if the server was being started for the first time.

  This is intended for testing purposes, but can be used -- with extreme caution -- as a brute-force repair for unrecoverable problems with a managed keys database, to jumpstart the key acquisition process if `bind.keys` is updated, etc. [RT #32456]

- dnssec-signzone -S can now add or remove synchronization records (CDS and CDNSKEY) based on key metadata set by the -Psync and -Dsync options to dnssec-keygen, dnssec-settime, etc. [RT #46149]

- dnssec-checkds -s specifies a file from which to read a DS set rather than querying the parent zone. This can be used to check zone correctness prior to publication. Thanks to Niall O'Reilly [RT #44667]

### Removed Features

- The ISC DNSSEC Lookaside Validation (DLV) service has been shut down; all DLV records in the dlv.isc.org zone have been removed. References to the service have been removed from BIND documentation. Lookaside validation is no longer used by default by delv. The DLV key has been removed from `bind.keys`. Setting dnssec-lookaside to auto or to use dlv.isc.org as a trust anchor results in a warning being issued.

- As noted above, the acache-enable, acache-cleaning-interval, additional-from-cache and additional-from-auth options are no longer effective and named will log a warning if they are set.

- The use of dnssec-keygen to generate HMAC keys for TSIG authentication has been deprecated in favor of tsig-keygen. If the algorithms HMAC-MD5, HMAC-SHA1, HMAC-SHA224, HMAC-SHA256, HMAC-SHA384, or HMAC-SHA512 are specified, dnssec-keygen will print a warning message. These algorithms will be removed from dnssec-keygen entirely in a future release. [RT #42272]

- The use of HMAC-MD5 for RNDC keys is no longer recommended. The default algorithm generated by rndc-confgen is now HMAC-SHA256. [RT #42272]

- The isc-hmac-fixup command, which was created to address an interoperability problem in TSIG keys between early versions of BIND and other DNS implmentations, is now obsolete and has been removed. [RT #46411]

### Protocol Changes

- BIND can now use the Ed25519 and Ed448 Edwards Curve DNSSEC signing algorithms described in RFC 8080. Note, however, that these algorithms must be supported in OpenSSL; currently they are only available in the development branch of OpenSSL at https://github.com/openssl/openssl. [RT #44696]

- When parsing DNS messages, EDNS KEY TAG options are checked for correctness. When printing messages (for example, in dig), EDNS KEY TAG options are printed in readable format.

### Feature Changes

- The ISC DNSSEC Lookaside Validation (DLV) service has been shut down; all DLV records in the dlv.isc.org zone have been removed. References to the service have been removed from BIND documentation. Lookaside validation is no longer used by default by delv. The DLV key has been removed from `bind.keys`. Setting dnssec-lookaside to auto or to use dlv.isc.org as a trust anchor is now a fatal configuration error. [RT #46155]

- named will no longer start or accept reconfiguration if the working directory (specified by the directory option) or the managed-keys directory (specified by managed-keys-directory are not writable by the effective user ID. [RT #46077]

- Initializing keys specified in a managed-keys statement or by dnssec-validation auto; are now tagged as "initializing", until they have been updated by a key refresh query. If key maintenance fails to initialize, this will be visible when running rndc secroots. [RT #46267]

- Previously, update-policy local; accepted updates from any source so long as they were signed by the locally-generated session key. This has been further restricted; updates are now only accepted from locally configured addresses. [RT #45492]

- The lightweight resolver daemon and library (lwresd and liblwres) have been removed. [RT #45186]

- dnssec-keygen no longer has default algorithm settings. It is necessary to explicitly specify the algorithm on the command line with the -a option when generating keys. This may cause errors with existing signing scripts if they rely on current defaults. The intent is to reduce the long-term cost of transitioning to newer algorithms in the event of RSASHA1 being deprecated. [RT #44755]

- dig +sigchase and related options +trusted-keys and +topdown have been removed. delv is now the recommended command for looking up records with DNSSEC validation. [RT #42793]

- The Response Policy Zone (RPZ) implementation has been substantially refactored: updates to the RPZ summary database are no longer directly performed by the zone database but by a separate function that is called when a policy zone is updated. This improves both performance and reliability when policy zones receive frequent updates. Summary database updates can be rate-limited by using the min-update-interval option in a response-policy statement. [RT #43449]

- dnstap now stores both the local and remote addresses for all messages, instead of only the remote address. The default output format for dnstap-read has been updated to include these addresses, with the initiating address first and the responding address second, separated by "->" or "<-" to indicate in which direction the message was sent. [RT #43595]

- Expanded and improved the YAML output from dnstap-read -y: it now includes packet size and a detailed breakdown of message contents. [RT #43622] [RT #43642]

- Threads in named are now set to human-readable names to assist debugging on operating systems that support that. Threads will have names such as "isc-timer", "isc-sockmgr", "isc-worker0001", and so on. This will affect the reporting of subsidiary thread names in ps and top, but not the main thread. [RT #43234]

- If an ACL is specified with an address prefix in which the prefix length is longer than the address portion (for example, 192.0.2.1/8), it will now be treated as a fatal error during configuration. [RT #43367]

- dig now warns about .local queries which are reserved for Multicast DNS. [RT #44783]

- The view associated with the query is now logged unless it it is "_default/IN" or "_dnsclient/IN" when logging DNSSEC validator messages.

- When named was reconfigured, failure of some zones to load correctly could leave the system in an inconsistent state; while generally harmless, this could lead to a crash later when using rndc addzone. Reconfiguration changes are now fully rolled back in the event of failure. [RT #45841]

- Multiple cookie-secret clauses are now supported. The first cookie-secret in `named.conf` is used to generate new server cookies. Any others are used to accept old server cookies or those generated by other servers using the matching cookie-secret.

- A new statistics counter has been added to track prefetch queries. [RT #45847]

- A new statistics counter has been added to track priming queries. [RT #46313]

- The dnssec-signzone -x flag and the dnssec-dnskey-kskonly option in named.conf, which suppress the use of the ZSK when signing DNSKEY records, now also apply to CDNSKEY and CDS records. Thanks to Tony Finch for the contribution. [RT #45689]

- Trust anchor telemetry messages, as specified by RFC 8145, are now logged to the trust-anchor-telemetry logging catagory.

- The filter-aaaa-on-v4 and filter-aaaa-on-v6 options are no longer conditionally compiled in named. [RT #46340]

### Bug Fixes

- Zones created with rndc addzone could temporarily fail to inherit the allow-transfer ACL set in the options section of `named.conf`. [RT #46603]

- The introduction of libns caused a bug in which TCP client objects were not recycled after use, leading to unconstrained memory growth. [RT #46029]

- Some header files included <isc/util.h> incorrectly as it pollutes with namespace with non ISC_ macros and this should only be done by explicitly including <isc/util.h>. This has been corrected. Some code may depend on <isc/util.h> being implicitly included via other header files. Such code should explicitly include <isc/util.h>.

- named failed to properly determine whether there were active KSK and ZSK keys for an algorithm when update-check-ksk was true (which is the default setting). This could leave records unsigned when rolling keys. [RT #46743] [RT #46754] [RT #46774]

### End of Life

The end of life for BIND 9.12 is yet to be determined but will not be before BIND 9.14.0 has been released for 6 months. https://www.isc.org/downloads/software-support-policy/

### Thank You

Thank you to everyone who assisted us in making this release possible. If you would like to contribute to ISC to assist us in continuing to make quality open source software, please visit our donations page at http://www.isc.org/donate/.