Appendix A. Release Notes
Prev |  | Next

# Release Notes

## Release Notes for BIND Version 9.11.0b1

### Introduction

BIND 9.11.0 is a new feature release of BIND, still under development. This document summarizes new features and functional changes that have been introduced on this branch. With each development release leading up to the final BIND 9.11.0 release, this document will be updated with additional features added and bugs fixed.

### Download

The latest versions of BIND 9 software can always be found at http://www.isc.org/downloads/. There you will find additional information about each release, source code, and pre-compiled versions for Microsoft Windows operating systems.

### License Change

- With the release of BIND 9.11.0, ISC is changing the open source license for BIND from the ISC license to the Mozilla Public License (MPL 2.0). This change is effective from BIND 9.11.0b1 onwards.

  The MPL-2.0 license requires that if you make changes to licensed software (e.g. BIND) and distribute them outside your organization, that you publish those changes under that same license. It does not require that you publish or disclose anything other than the changes you made to our software.

  This new requirement will not affect anyone who is using BIND without redistributing it, nor anyone redistributing it without changes, therefore this change will be without consequence for most individuals and organizations who are using BIND.

  Those unsure whether or not the license change affects their use of BIND, or who wish to discuss how to comply with the license may contact ISC at https://www.isc.org/mission/contact/.

### Security Fixes

- None.

### New Features

- A new method of provisioning secondary servers called "Catalog Zones" has been added. This is an implementation of draft-muks-dnsop-dns-catalog-zones/ .

  A catalog zone is a regular DNS zone which contains a list of "member zones", along with the configuration options for each of those zones. When a server is configured to use a catalog zone, all the zones listed in the catalog zone are added to the local server as slave zones. When the catalog zone is updated (e.g., by adding or removing zones, or changing configuration options for existing zones) those changes will be put into effect. Since the catalog zone is itself a DNS zone, this means configuration changes can be propagated to slaves using the standard AXFR/IXFR update mechanism.

  This feature should be considered experimental. It currently supports only basic features; more advanced features such as ACLs and TSIG keys are not yet supported. Example catalog zone configurations can be found in the Chapter 9 of the BIND Administrator Reference Manual.

  Support for master entries with TSIG keys has been added to catalog zones, as well as support for allow-query and allow-transfer.

- Added rndc python module.

- Added support for DynDB, a new interface for loading zone data from an external database, developed by Red Hat for the FreeIPA project. (Thanks in particular to Adam Tkac and Petr Spacek of Red Hat for the contribution.)

  Unlike the existing DLZ and SDB interfaces, which provide a limited subset of database functionality within BIND — translating DNS queries into real-time database lookups with relatively poor performance and with no ability to handle DNSSEC-signed data — DynDB is able to fully implement and extend the database API used natively by BIND.

  A DynDB module could pre-load data from an external data source, then serve it with the same performance and functionality as conventional BIND zones, and with the ability to take advantage of database features not available in BIND, such as multi-master replication.

- New quotas have been added to limit the queries that are sent by recursive resolvers to authoritative servers experiencing denial-of-service attacks. When configured, these options can both reduce the harm done to authoritative servers and also avoid the resource exhaustion that can be experienced by recursives when they are being used as a vehicle for such an attack.

  - `fetches-per-server` limits the number of simultaneous queries that can be sent to any single authoritative server. The configured value is a starting point; it is automatically adjusted downward if the server is partially or completely non-responsive. The algorithm used to adjust the quota can be configured via the `fetch-quota-params` option.

  - `fetches-per-zone` limits the number of simultaneous queries that can be sent for names within a single domain. (Note: Unlike "fetches-per-server", this value is not self-tuning.)

  Statistics counters have also been added to track the number of queries affected by these quotas.

- Added support for dnstap, a fast, flexible method for capturing and logging DNS traffic, developed by Robert Edmonds at Farsight Security, Inc., whose assistance is gratefully acknowledged.

  To enable dnstap at compile time, the fstrm and protobuf-c libraries must be available, and BIND must be configured with `--enable-dnstap`.

  A new utility dnstap-read has been added to allow dnstap data to be presented in a human-readable format.

  rndc dnstap-reopen can be used reopen dnstap output files after renaming them.

  For more information on dnstap, see http://dnstap.info.

- New statistics counters have been added to track traffic sizes, as specified in RSSAC002. Query and response message sizes are broken up into ranges of histogram buckets: TCP and UDP queries of size 0-15, 16-31, ..., 272-288, and 288+, and TCP and UDP responses of size 0-15, 16-31, ..., 4080-4095, and 4096+. These values can be accessed via the XML and JSON statistics channels at, for example, http://localhost:8888/xml/v3/traffic or http://localhost:8888/json/v1/traffic.

  Statistics for RSSAC02v3 traffic-volume, traffic-sizes and rcode-volume reporting are now collected.

- A new DNSSEC key management utility, dnssec-keymgr, has been added. This tool is meant to run unattended (e.g., under cron). It reads a policy definition file (default: `/etc/dnssec.policy`) and creates or updates DNSSEC keys as necessary to ensure that a zone's keys match the defined policy for that zone. New keys are created whenever necessary to ensure rollovers occur correctly. Existing keys' timing metadata is adjusted as needed to set the correct rollover period, prepublication interval, etc. If the configured policy changes, keys are corrected automatically. See the dnssec-keymgr man page for full details.

  Note: dnssec-keymgr depends on Python and on the Python lex/yacc module, PLY. The other Python-based tools, dnssec-coverage and dnssec-checkds, have been refactored and updated as part of this work.

  dnssec-keymgr now takes a -r <replacable>randomfile</replacable> option.

  (Many thanks to Sebastián Castro for his assistance in developing this tool at the IETF 95 Hackathon in Buenos Aires, April 2016.)

- The serial number of a dynamically updatable zone can now be set using rndc signing -serial `number` `zonename`. This is particularly useful with `inline-signing` zones that have been reset. Setting the serial number to a value larger than that on the slaves will trigger an AXFR-style transfer.

- When answering recursive queries, SERVFAIL responses can now be cached by the server for a limited time; subsequent queries for the same query name and type will return another SERVFAIL until the cache times out. This reduces the frequency of retries when a query is persistently failing, which can be a burden on recursive serviers. The SERVFAIL cache timeout is controlled by `servfail-ttl`, which defaults to 1 second and has an upper limit of 30.

- The new rndc nta command can now be used to set a "negative trust anchor" (NTA), disabling DNSSEC validation for a specific domain; this can be used when responses from a domain are known to be failing validation due to administrative error rather than because of a spoofing attack. NTAs are strictly temporary; by default they expire after one hour, but can be configured to last up to one week. The default NTA lifetime can be changed by setting the `nta-lifetime` in `named.conf`. When added, NTAs are stored in a file (``viewname`.nta`) in order to persist across restarts of the named server.

- The EDNS Client Subnet (ECS) option is now supported for authoritative servers; if a query contains an ECS option then ACLs containing `geoip` or `ecs` elements can match against the address encoded in the option. This can be used to select a view for a query, so that different answers can be provided depending on the client network.

- The EDNS EXPIRE option has been implemented on the client side, allowing a slave server to set the expiration timer correctly when transferring zone data from another slave server.

- A new `masterfile-style` zone option controls the formatting of text zone files: When set to `full`, the zone file will dumped in single-line-per-record format.

- dig +ednsopt can now be used to set arbitrary EDNS options in DNS requests.

- dig +ednsflags can now be used to set yet-to-be-defined EDNS flags in DNS requests.

- dig +[no]ednsnegotiation can now be used enable / disable EDNS version negotiation.

- dig +header-only can now be used to send queries without a question section.

- dig +ttlunits causes dig to print TTL values with time-unit suffixes: w, d, h, m, s for weeks, days, hours, minutes, and seconds.

- dig +zflag can be used to set the last unassigned DNS header flag bit. This bit is normally zero.

- dig +dscp=`value` can now be used to set the DSCP code point in outgoing query packets.

- dig +mapped can now be used to determine if mapped IPv4 addresses can be used.

- `serial-update-method` can now be set to `date`. On update, the serial number will be set to the current date in YYYYMMDDNN format.

- dnssec-signzone -N date also sets the serial number to YYYYMMDDNN.

- named -L `filename` causes named to send log messages to the specified file by default instead of to the system log.

- The rate limiter configured by the `serial-query-rate` option no longer covers NOTIFY messages; those are now separately controlled by `notify-rate` and `startup-notify-rate` (the latter of which controls the rate of NOTIFY messages sent when the server is first started up or reconfigured).

- The default number of tasks and client objects available for serving lightweight resolver queries have been increased, and are now configurable via the new `lwres-tasks` and `lwres-clients` options in `named.conf`. [RT #35857]

- Log output to files can now be buffered by specifying buffered yes; when creating a channel.

- delv +tcp will exclusively use TCP when sending queries.

- named will now check to see whether other name server processes are running before starting up. This is implemented in two ways: 1) by refusing to start if the configured network interfaces all return "address in use", and 2) by attempting to acquire a lock on a file specified by the `lock-file` option or the -X command line option. The default lock file is `/var/run/named/named.lock`. Specifying `none` will disable the lock file check.

- rndc delzone can now be applied to zones which were configured in `named.conf`; it is no longer restricted to zones which were added by rndc addzone. (Note, however, that this does not edit `named.conf`; the zone must be removed from the configuration or it will return when named is restarted or reloaded.)

- rndc modzone can be used to reconfigure a zone, using similar syntax to rndc addzone.

- rndc showzone displays the current configuration for a specified zone.

- Added server-side support for pipelined TCP queries. Clients may continue sending queries via TCP while previous queries are processed in parallel. Responses are sent when they are ready, not necessarily in the order in which the queries were received.

  To revert to the former behavior for a particular client address or range of addresses, specify the address prefix in the "keep-response-order" option. To revert to the former behavior for all clients, use "keep-response-order { any; };".

- The new mdig command is a version of dig that sends multiple pipelined queries and then waits for responses, instead of sending one query and waiting the response before sending the next. [RT #38261]

- To enable better monitoring and troubleshooting of RFC 5011 trust anchor management, the new rndc managed-keys can be used to check status of trust anchors or to force keys to be refreshed. Also, the managed-keys data file now has easier-to-read comments. [RT #38458]

- An --enable-querytrace configure switch is now available to enable very verbose query tracelogging. This option can only be set at compile time. This option has a negative performance impact and should be used only for debugging. [RT #37520]

- A new tcp-only option can be specified in server statements to force named to connect to the specified server via TCP. [RT #37800]

- The nxdomain-redirect option specifies a DNS namespace to use for NXDOMAIN redirection. When a recursive lookup returns NXDOMAIN, a second lookup is initiated with the specified name appended to the query name. This allows NXDOMAIN redirection data to be supplied by multiple zones configured on the server or by recursive queries to other servers. (The older method, using a single type redirect zone, has better average performance but is less flexible.) [RT #37989]

- The following types have been implemented: CSYNC, NINFO, RKEY, SINK, TA, TALINK.

- A new message-compression option can be used to specify whether or not to use name compression when answering queries. Setting this to `no` results in larger responses, but reduces CPU consumption and may improve throughput. The default is `yes`.

- A read-only option is now available in the controls statement to grant non-destructive control channel access. In such cases, a restricted set of rndc commands are allowed, which can report information from named, but cannot reconfigure or stop the server. By default, the control channel access is not restricted to these read-only operations. [RT #40498]

- When loading a signed zone, named will now check whether an RRSIG's inception time is in the future, and if so, it will regenerate the RRSIG immediately. This helps when a system's clock needs to be reset backwards.

- The new minimal-any option reduces the size of answers to UDP queries for type ANY by implementing one of the strategies in "draft-ietf-dnsop-refuse-any": returning a single arbitrarily-selected RRset that matches the query name rather than returning all of the matching RRsets. Thanks to Tony Finch for the contribution. [RT #41615]

### Feature Changes

- The ISC DNSSEC Lookaside Validation (DLV) service is scheduled to be disabled in 2017. A warning is now logged when named is configured to use this service, either explicitly or via `dnssec-lookaside auto;`. [RT #42207]

- The timers returned by the statistics channel (indicating current time, server boot time, and most recent reconfiguration time) are now reported with millisecond accuracy. [RT #40082]

- Updated the compiled-in addresses for H.ROOT-SERVERS.NET and L.ROOT-SERVERS.NET.

- ACLs containing geoip asnum elements were not correctly matched unless the full organization name was specified in the ACL (as in geoip asnum "AS1234 Example, Inc.";). They can now match against the AS number alone (as in geoip asnum "AS1234";).

- When using native PKCS#11 cryptography (i.e., configure --enable-native-pkcs11) HSM PINs of up to 256 characters can now be used.

- NXDOMAIN responses to queries of type DS are now cached separately from those for other types. This helps when using "grafted" zones of type forward, for which the parent zone does not contain a delegation, such as local top-level domains. Previously a query of type DS for such a zone could cause the zone apex to be cached as NXDOMAIN, blocking all subsequent queries. (Note: This change is only helpful when DNSSEC validation is not enabled. "Grafted" zones without a delegation in the parent are not a recommended configuration.)

- Update forwarding performance has been improved by allowing a single TCP connection to be shared between multiple updates.

- By default, nsupdate will now check the correctness of hostnames when adding records of type A, AAAA, MX, SOA, NS, SRV or PTR. This behavior can be disabled with check-names no.

- Added support for OPENPGPKEY type.

- The names of the files used to store managed keys and added zones for each view are no longer based on the SHA256 hash of the view name, except when this is necessary because the view name contains characters that would be incompatible with use as a file name. For views whose names do not contain forward slashes ('/'), backslashes ('\'), or capital letters - which could potentially cause namespace collision problems on case-insensitive filesystems - files will now be named after the view (for example, `internal.mkeys` or `external.nzf`). However, to ensure consistent behavior when upgrading, if a file using the old name format is found to exist, it will continue to be used.

- "rndc" can now return text output of arbitrary size to the caller. (Prior to this, certain commands such as "rndc tsig-list" and "rndc zonestatus" could return truncated output.)

- Errors reported when running rndc addzone (e.g., when a zone file cannot be loaded) have been clarified to make it easier to diagnose problems.

- When encountering an authoritative name server whose name is an alias pointing to another name, the resolver treats this as an error and skips to the next server. Previously this happened silently; now the error will be logged to the newly-created "cname" log category.

- If named is not configured to validate answers, then allow fallback to plain DNS on timeout even when we know the server supports EDNS. This will allow the server to potentially resolve signed queries when TCP is being blocked.

- Large inline-signing changes should be less disruptive. Signature generation is now done incrementally; the number of signatures to be generated in each quantum is controlled by "sig-signing-signatures `number`;". [RT #37927]

- The experimental SIT option (code point 65001) of BIND 9.10.0 through BIND 9.10.2 has been replaced with the COOKIE option (code point 10). It is no longer experimental, and is sent by default, by both named and dig.

  The SIT-related named.conf options have been marked as obsolete, and are otherwise ignored.

- When dig receives a truncated (TC=1) response or a BADCOOKIE response code from a server, it will automatically retry the query using the server COOKIE that was returned by the server in its initial response. [RT #39047]

- A alternative NXDOMAIN redirect method (nxdomain-redirect) which allows the redirect information to be looked up from a namespace on the Internet rather than requiring a zone to be configured on the server is now available.

- Retrieving the local port range from net.ipv4.ip_local_port_range on Linux is now supported.

- A new `nsip-wait-recurse` directive has been added to RPZ, specifying whether to look up unknown name server IP addresses and wait for a response before applying RPZ-NSIP rules. The default is `yes`. If set to `no`, named will only apply RPZ-NSIP rules to servers whose addresses are already cached. The addresses will be looked up in the background so the rule can be applied on subsequent queries. This improves performance when the cache is cold, at the cost of temporary imprecision in applying policy directives. [RT #35009]

- Within the `response-policy` option, it is now possible to configure RPZ rewrite logging on a per-zone basis using the `log` clause.

- The default preferred glue is now the address type of the transport the query was received over.

- On machines with 2 or more processors (CPU), the default value for the number of UDP listeners has been changed to the number of detected processors minus one.

- Zone transfers now use smaller message sizes to improve message compression. This results in reduced network usage.

- Added support for the AVC resource record type (Application Visibility and Control).

  Changed rndc reconfig behaviour so that newly added zones are loaded asynchronously and the loading does not block the server.

### Porting Changes

- None.

### Bug Fixes

- Fixed a crash when calling rndc stats on some Windows builds: some Visual Studio compilers generate code that crashes when the "%z" printf() format specifier is used. [RT #42380]

- Windows installs were failing due to triggering UAC without the installation binary being signed.

- A change in the internal binary representation of the RBT database node structure enabled a race condition to occur (especially when BIND was built with certain compilers or optimizer settings), leading to inconsistent database state which caused random assertion failures. [RT #42380]

### End of Life

The end of life for BIND 9.11 is yet to be determined but will not be before BIND 9.13.0 has been released for 6 months. https://www.isc.org/downloads/software-support-policy/

### Thank You

Thank you to everyone who assisted us in making this release possible. If you would like to contribute to ISC to assist us in continuing to make quality open source software, please visit our donations page at http://www.isc.org/donate/.

Prev |  | Next
Chapter 8. Troubleshooting | Home | Appendix B. A Brief History of the DNS and BIND

BIND 9.11.0b1