]> Google

martin.h.duke@gmail.com

Web and Internet Transport Standard Communication with Network Elements The SCONE protocol relies on the receiver of SCONE packets to send bandwidth estimates back to the sender via unspecified application-layer messages. In some cases, a peer might have SCONE receive capability at the QUIC layer but not implement the necessary application level functionality. A new QUIC frame that directly reports the contents of received SCONE packets can address these use cases. There are no changes in the interaction with SCONE Network Elements. About This Document The latest revision of this draft can be found at . Status information for this document may be found at . Discussion of this document takes place on the Standard Communication with Network Elements Working Group mailing list (), which is archived at . Subscribe at . Source for this draft and an issue tracker can be found at .

Introduction The SCONE protocol () allows networks to provide bandwidth guidance to endpoints. Senders prepend a SCONE header to QUIC () packets that include a 7-bit bandwidth field. Network elements can update this field. The receiver of SCONE packets reports the received value to the application. The application can use this information to adjust the bit rate, either by directly reporting the value back to the sender at the application layer, or by using it to make some other adjustment to the incoming traffic. This architecture requires cooperation from the application layer: a receiver cannot usefully process a SCONE packet without application involvement to take action on the result. In principle, a QUIC implementation could send SCONE packets solely based on the receiver's advertised ability to receive, but it might have difficulty determining the correct rate to send such packets. The receiver would need to effectuate any behavior changes without SCONE-aware cooperation from the sender. The authors are not aware of any deployments that send SCONE packets without explicit confirmations from the application layer. There are some use cases where it would be useful to not require cooperation from the receiving application, instead returning feedback directly at the QUIC layer. There are fewer QUIC implementations than applications. A QUIC implementation might support SCONE, but the intervening layers do not provide SCONE APIs. For example, a browser could use a third-party QUIC implementation that supports SCONE, but not provide the JavaScript APIs to enable and process SCONE. If the QUIC implementation could directly return feedback to the sender, then only application support at the sender is required. This document proposes an extension to the QUIC protocol defining a new QUIC frame that echoes received SCONE feedback directly to the sender at the QUIC layer.

Conventions and Definitions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.

Overview The use of the SCONE_ECHO frame is negotiated by new transport parameters separately in each direction. This negotiation is an alternate means of enabling the use of SCONE packets, in addition to scone_supported from . For a given direction, sending SCONE is authorized by the new transport parameters or scone_supported, never both. When an endpoint receives a valid SCONE packet, SCONE_ECHO was negotiated in that direction, and the rate signal has changed, it sends a SCONE_ECHO QUIC frame. Upon receipt of a valid SCONE_ECHO packet, the SCONE sender reports the rate signal to its local application layer for further action. There are no changes to SCONE Network Element behavior or the SCONE packet format from . SCONE packets are still only valid if another QUIC packet in the UDP datagram is successfully decrypted.

The SCONE_ECHO Frame An endpoint uses the SCONE_ECHO frame to return the 7-bit value encoded in a SCONE packet. The conditions for sending it are described in . Path Identifier: The path ID of the path on which the SCONE packet was received, as defined in . If that extension is not in use, the Path Identifier MUST be zero. Packet Number: the full (62-bit) packet number of the first successfully decrypted QUIC packet in the UDP datagram that contained the SCONE header. Zero: This bit MUST be zero and MUST be ignored on receipt. Rate Signal: The Rate Signal in the SCONE packet as encoded in Section 5 of . A SCONE sender SHOULD keep track of the Packet Numbers to which it prepended SCONE headers, and MUST ignore any SCONE_ECHO frames where it does not have a record of prepending SCONE to that packet number. It might not store such numbers when it hits storage limitations or receives duplicate SCONE_ECHO frames. SCONE_ECHO frames are not retransmittable and SHOULD be held until the receiver is ready to send a packet. They MUST only appear in 1-RTT packets, because a succesfully decrypted 1-RTT packet indicates all transport parameters have been verified. However, the Packet Number field can refer to a packet number in any packet number space. SCONE senders can use the ACK for packets that were coalesced with a SCONE packet as an indication the SCONE packet was received.

Negotiating SCONE Echo This document specifies two new transport parameters: scone_echo_send and scone_echo_receive. Endpoints send scone_echo_send to indicate they will send SCONE_ECHO frames in response to valid SCONE packets. An endpoint MUST NOT send both scone_echo_send and scone_supported; doing so is a TRANSPORT_PARAMETER_ERROR. Endpoints send scone_echo_receive to indicate the ability to process SCONE_ECHO frames. Endpoints MUST NOT send SCONE packets unless the peer has sent either scone_supported or scone_echo_send. If the peer sent scone_echo_send, the endpoint MUST also have sent scone_echo_receive. Endpoints MUST NOT send SCONE_ECHO frames unless it has sent scone_echo_send and the peer has sent scone_echo_receive. scone_echo_send and scone_echo_receive MUST be empty. If not empty, it MUST be treated as a connection error of type TRANSPORT_PARAMETER_ERROR. These transport parameters are valid for QUIC Version 1 , QUIC Version 2 , and any other version that supports SCONE as outlined in Section 6 of . These transport parameters MUST NOT be stored for 0-RTT purposes.

The SCONE indicator A client that sends the scone_echo_send or scone_echo_receive transport parameter MUST send the SCONE Indicator as described in Section 6.1 of , whether or not it also sends scone_supported. Its semantic meaning remains unchanged.

Applicability In general, the scone_supported transport parameter from indicates that the sender has a local application that is willing to accept bandwidth advice, potentially including sending that information to the SCONE sender via application-layer messaging. If this is the case, a QUIC endpoint SHOULD NOT send scone_echo_send, as application-layer approaches can incorporate various receiver-side actions as well as more bandwidth-efficient signals to the sender. A QUIC implementation that does not have application-layer cooperation can send scone_echo_send instead to enable a purely sender-side approach. QUIC implementations will generally not send SCONE packets without a request from the local application. An endpoint that wishes to send SCONE packets can send scone_echo_receive in case the peer is unable to support an application- layer response. [Note: It is possible to revise this specification to allow the SCONE receiver to send both SCONE_ECHO and report to the application, thought this risks duplicate signaling and complicates reasoning about application response. Similarly, it is possible to allow a SCONE sender to signal preference for either SCONE_ECHO or application response, although this would further complicate negotiation. Nevertheless, both are viable options if the Working Group desires it.]

Security Considerations The security considerations in Section 9 of apply. The base SCONE protocol mitigates incorrectly modified advice by allowing the receiving application to ignore it. In practice, a client could make this decision using contextual metrics (e.g. playback metrics and buffer health in a video player) or by probing above the advised rate to assess whether the advice was appropriate. A sending application that changes its behavior based on echoed SCONE advice should consider that the receiving client may be unaware that such advice has been applied and/or be unable to probe above the advised rate. Implementations should consider appropriate mechanisms that allow the accuracy of the advice to be assessed, such as client-reported metrics, applying the advice in a way that preserves the client's ability to probe above the advised rate, or itself probing to verify the advice.

Privacy Considerations Section 10 of describes the potential privacy exposure of using SCONE. Requiring application-layer engagement provides an additional layer of consent to this exposure, although such engagement may not extend to the actual user. This document envisions SCONE Echo being enabled by default in some QUIC implementations. This might actually obscure application fingerprinting, but it also further distances consent from the user. SCONE Echo envisions a widely deployed network of endpoints willing to send network bandwidth advice to the sender. This makes it much easier for a observer to obtain a map of bandwidth advice from its location.

IANA Considerations

scone_echo_send Transport Parameter The document registers the scone_echo_send transport parameter in the "QUIC Transport Parameters" registry maintained at https://www.iana.org/assignments/quic, following the guidance from Section 22.3 of . Value: 0xff002200 Parameter Name: scone_echo_send Status: Provisional Specification: This document Change Controller: IETF (iesg@ietf.org) Contact: QUIC Working Group (quic@ietf.org) Notes: (none)

scone_echo_receive Transport Parameter The document registers the scone_echo_receive transport parameter in the "QUIC Transport Parameters" registry maintained at https://www.iana.org/assignments/quic, following the guidance from Section 22.3 of . Value: 0xff002201 Parameter Name: scone_echo_receive Status: Provisional Specification: This document Change Controller: IETF (iesg@ietf.org) Contact: QUIC Working Group (quic@ietf.org) Notes: (none)

SCONE_ECHO frame This document registers the SCONE_ECHO frame in the "QUIC Frame Types" registry. value: 0xff005345 name: SCONE_ECHO Status: Provisional Specification: Change Controller: IETF (iesg@ietf.org) Contact: QUIC Working Group (quic@ietf.org) Pkts: 1-RTT

References Normative References Mozilla Private Octopus Inc. Fastly Meta Ericsson This document describes a protocol where on-path network elements can communicate their perspective on the maximum sustainable throughput for QUIC flows to endpoints. This throughput advice suggests an upper bound on long-term average throughput, independent of and complementary to real-time congestion control signals. This document defines the properties of the QUIC transport protocol that are common to all versions of the protocol. In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. Alibaba Inc. Uber Technologies Inc. University of Mons (UMONS) UCLouvain and WELRI Private Octopus Inc. Ericsson This document specifies a multipath extension for the QUIC protocol to enable the simultaneous usage of multiple paths for a single connection. It introduces explicit path identifiers to create, delete, and manage multiple paths. This document does not specify address discovery or management, nor how applications using QUIC schedule traffic over multiple paths. Informative References This document defines the core of the QUIC transport protocol. QUIC provides applications with flow-controlled streams for structured communication, low-latency connection establishment, and network path migration. QUIC includes security measures that ensure confidentiality, integrity, and availability in a range of deployment circumstances. Accompanying documents describe the integration of TLS for key negotiation, loss detection, and an exemplary congestion control algorithm. This document specifies QUIC version 2, which is identical to QUIC version 1 except for some trivial details. Its purpose is to combat various ossification vectors and exercise the version negotiation framework. It also serves as a template for the minimum changes in any future version of QUIC. Note that "version 2" is an informal name for this proposal that indicates it is the second version of QUIC to be published as a Standards Track document. The protocol specified here uses a version number other than 2 in the wire image, in order to minimize ossification risks.

Acknowledgments TODO acknowledge.