-----------------------------------------------------------------------------
This file contains a concatenation of the PCRE2 man pages, converted to plain
text format for ease of searching with a text editor, or for use on systems
that do not have a man page processor. The small individual files that give
synopses of each function in the library have not been included. Neither has
the pcre2demo program. There are separate text files for the pcre2grep and
pcre2test commands.
-----------------------------------------------------------------------------


PCRE2(3)                   Library Functions Manual                   PCRE2(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

INTRODUCTION

       PCRE2 is the name used for a revised API for the PCRE library, which is
       a set of functions, written in C,  that  implement  regular  expression
       pattern matching using the same syntax and semantics as Perl, with just
       a few differences. Some features that appeared in Python and the origi-
       nal  PCRE  before  they  appeared  in Perl are also available using the
       Python syntax. There is also some support for one or two .NET and Onig-
       uruma  syntax  items,  and  there are options for requesting some minor
       changes that give better ECMAScript (aka JavaScript) compatibility.

       The source code for PCRE2 can be compiled to support 8-bit, 16-bit,  or
       32-bit  code units, which means that up to three separate libraries may
       be installed.  The original work to extend PCRE to  16-bit  and  32-bit
       code  units  was  done  by Zoltan Herczeg and Christian Persch, respec-
       tively. In all three cases, strings can be interpreted  either  as  one
       character  per  code  unit, or as UTF-encoded Unicode, with support for
       Unicode general category properties. Unicode  support  is  optional  at
       build  time  (but  is  the default). However, processing strings as UTF
       code units must be enabled explicitly at run time. The version of  Uni-
       code in use can be discovered by running

         pcre2test -C

       The  three  libraries  contain  identical sets of functions, with names
       ending in _8,  _16,  or  _32,  respectively  (for  example,  pcre2_com-
       pile_8()).  However,  by defining PCRE2_CODE_UNIT_WIDTH to be 8, 16, or
       32, a program that uses just one code unit width can be  written  using
       generic names such as pcre2_compile(), and the documentation is written
       assuming that this is the case.

       In addition to the Perl-compatible matching function, PCRE2 contains an
       alternative  function that matches the same compiled patterns in a dif-
       ferent way. In certain circumstances, the alternative function has some
       advantages.   For  a discussion of the two matching algorithms, see the
       pcre2matching page.

       Details of exactly which Perl regular expression features are  and  are
       not  supported  by  PCRE2  are  given  in  separate  documents. See the
       pcre2pattern and pcre2compat pages. There is a syntax  summary  in  the
       pcre2syntax page.

       Some  features  of PCRE2 can be included, excluded, or changed when the
       library is built. The pcre2_config() function makes it possible  for  a
       client  to  discover  which  features are available. The features them-
       selves are described in the pcre2build page. Documentation about build-
       ing  PCRE2 for various operating systems can be found in the README and
       NON-AUTOTOOLS_BUILD files in the source distribution.

       The libraries contains a number of undocumented internal functions  and
       data  tables  that  are  used by more than one of the exported external
       functions, but which are not intended  for  use  by  external  callers.
       Their  names  all begin with "_pcre2", which hopefully will not provoke
       any name clashes. In some environments, it is possible to control which
       external  symbols  are  exported when a shared library is built, and in
       these cases the undocumented symbols are not exported.


SECURITY CONSIDERATIONS

       If you are using PCRE2 in a non-UTF application that permits  users  to
       supply  arbitrary  patterns  for  compilation, you should be aware of a
       feature that allows users to turn on UTF support from within a pattern.
       For  example, an 8-bit pattern that begins with "(*UTF)" turns on UTF-8
       mode, which interprets patterns and subjects as strings of  UTF-8  code
       units instead of individual 8-bit characters. This causes both the pat-
       tern and any data against which it is matched to be checked  for  UTF-8
       validity.  If the data string is very long, such a check might use suf-
       ficiently many resources as to cause your application to  lose  perfor-
       mance.

       One  way  of guarding against this possibility is to use the pcre2_pat-
       tern_info() function  to  check  the  compiled  pattern's  options  for
       PCRE2_UTF.  Alternatively,  you can set the PCRE2_NEVER_UTF option when
       calling pcre2_compile(). This causes a compile time error if  the  pat-
       tern contains a UTF-setting sequence.

       The  use  of Unicode properties for character types such as \d can also
       be enabled from within the pattern, by specifying "(*UCP)".  This  fea-
       ture can be disallowed by setting the PCRE2_NEVER_UCP option.

       If  your  application  is one that supports UTF, be aware that validity
       checking can take time. If the same data string is to be  matched  many
       times,  you  can  use  the PCRE2_NO_UTF_CHECK option for the second and
       subsequent matches to avoid running redundant checks.

       The use of the \C escape sequence in a UTF-8 or UTF-16 pattern can lead
       to  problems,  because  it  may leave the current matching point in the
       middle of  a  multi-code-unit  character.  The  PCRE2_NEVER_BACKSLASH_C
       option can be used by an application to lock out the use of \C, causing
       a compile-time error if it is encountered. It is also possible to build
       PCRE2 with the use of \C permanently disabled.

       Another  way  that  performance can be hit is by running a pattern that
       has a very large search tree against a string that  will  never  match.
       Nested  unlimited repeats in a pattern are a common example. PCRE2 pro-
       vides some protection against  this:  see  the  pcre2_set_match_limit()
       function  in  the  pcre2api  page.  There  is a similar function called
       pcre2_set_depth_limit() that can be used to restrict the amount of mem-
       ory that is used.


USER DOCUMENTATION

       The  user  documentation for PCRE2 comprises a number of different sec-
       tions. In the "man" format, each of these is a separate "man page".  In
       the  HTML  format, each is a separate page, linked from the index page.
       In the plain  text  format,  the  descriptions  of  the  pcre2grep  and
       pcre2test programs are in files called pcre2grep.txt and pcre2test.txt,
       respectively. The remaining sections, except for the pcre2demo  section
       (which  is a program listing), and the short pages for individual func-
       tions, are concatenated in pcre2.txt, for ease of searching.  The  sec-
       tions are as follows:

         pcre2              this document
         pcre2-config       show PCRE2 installation configuration information
         pcre2api           details of PCRE2's native C API
         pcre2build         building PCRE2
         pcre2callout       details of the callout feature
         pcre2compat        discussion of Perl compatibility
         pcre2demo          a demonstration C program that uses PCRE2
         pcre2grep          description of the pcre2grep command (8-bit only)
         pcre2jit           discussion of just-in-time optimization support
         pcre2limits        details of size and other limits
         pcre2matching      discussion of the two matching algorithms
         pcre2partial       details of the partial matching facility
         pcre2pattern       syntax and semantics of supported regular
                              expression patterns
         pcre2perform       discussion of performance issues
         pcre2posix         the POSIX-compatible C API for the 8-bit library
         pcre2sample        discussion of the pcre2demo program
         pcre2syntax        quick syntax reference
         pcre2test          description of the pcre2test command
         pcre2unicode       discussion of Unicode and UTF support

       In  the  "man"  and HTML formats, there is also a short page for each C
       library function, listing its arguments and results.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.

       Putting an actual email address here is a spam magnet. If you  want  to
       email  me,  use  my two initials, followed by the two digits 10, at the
       domain cam.ac.uk.


REVISION

       Last updated: 01 April 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2API(3)                Library Functions Manual                PCRE2API(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

       #include <pcre2.h>

       PCRE2  is  a  new API for PCRE, starting at release 10.0. This document
       contains a description of all its native functions. See the pcre2 docu-
       ment for an overview of all the PCRE2 documentation.


PCRE2 NATIVE API BASIC FUNCTIONS

       pcre2_code *pcre2_compile(PCRE2_SPTR pattern, PCRE2_SIZE length,
         uint32_t options, int *errorcode, PCRE2_SIZE *erroroffset,
         pcre2_compile_context *ccontext);

       void pcre2_code_free(pcre2_code *code);

       pcre2_match_data *pcre2_match_data_create(uint32_t ovecsize,
         pcre2_general_context *gcontext);

       pcre2_match_data *pcre2_match_data_create_from_pattern(
         const pcre2_code *code, pcre2_general_context *gcontext);

       int pcre2_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext);

       int pcre2_dfa_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext,
         int *workspace, PCRE2_SIZE wscount);

       void pcre2_match_data_free(pcre2_match_data *match_data);


PCRE2 NATIVE API AUXILIARY MATCH FUNCTIONS

       PCRE2_SPTR pcre2_get_mark(pcre2_match_data *match_data);

       uint32_t pcre2_get_ovector_count(pcre2_match_data *match_data);

       PCRE2_SIZE *pcre2_get_ovector_pointer(pcre2_match_data *match_data);

       PCRE2_SIZE pcre2_get_startchar(pcre2_match_data *match_data);


PCRE2 NATIVE API GENERAL CONTEXT FUNCTIONS

       pcre2_general_context *pcre2_general_context_create(
         void *(*private_malloc)(PCRE2_SIZE, void *),
         void (*private_free)(void *, void *), void *memory_data);

       pcre2_general_context *pcre2_general_context_copy(
         pcre2_general_context *gcontext);

       void pcre2_general_context_free(pcre2_general_context *gcontext);


PCRE2 NATIVE API COMPILE CONTEXT FUNCTIONS

       pcre2_compile_context *pcre2_compile_context_create(
         pcre2_general_context *gcontext);

       pcre2_compile_context *pcre2_compile_context_copy(
         pcre2_compile_context *ccontext);

       void pcre2_compile_context_free(pcre2_compile_context *ccontext);

       int pcre2_set_bsr(pcre2_compile_context *ccontext,
         uint32_t value);

       int pcre2_set_character_tables(pcre2_compile_context *ccontext,
         const unsigned char *tables);

       int pcre2_set_compile_extra_options(pcre2_compile_context *ccontext,
         uint32_t extra_options);

       int pcre2_set_max_pattern_length(pcre2_compile_context *ccontext,
         PCRE2_SIZE value);

       int pcre2_set_newline(pcre2_compile_context *ccontext,
         uint32_t value);

       int pcre2_set_parens_nest_limit(pcre2_compile_context *ccontext,
         uint32_t value);

       int pcre2_set_compile_recursion_guard(pcre2_compile_context *ccontext,
         int (*guard_function)(uint32_t, void *), void *user_data);


PCRE2 NATIVE API MATCH CONTEXT FUNCTIONS

       pcre2_match_context *pcre2_match_context_create(
         pcre2_general_context *gcontext);

       pcre2_match_context *pcre2_match_context_copy(
         pcre2_match_context *mcontext);

       void pcre2_match_context_free(pcre2_match_context *mcontext);

       int pcre2_set_callout(pcre2_match_context *mcontext,
         int (*callout_function)(pcre2_callout_block *, void *),
         void *callout_data);

       int pcre2_set_offset_limit(pcre2_match_context *mcontext,
         PCRE2_SIZE value);

       int pcre2_set_heap_limit(pcre2_match_context *mcontext,
         uint32_t value);

       int pcre2_set_match_limit(pcre2_match_context *mcontext,
         uint32_t value);

       int pcre2_set_depth_limit(pcre2_match_context *mcontext,
         uint32_t value);


PCRE2 NATIVE API STRING EXTRACTION FUNCTIONS

       int pcre2_substring_copy_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_UCHAR *buffer, PCRE2_SIZE *bufflen);

       int pcre2_substring_copy_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_UCHAR *buffer,
         PCRE2_SIZE *bufflen);

       void pcre2_substring_free(PCRE2_UCHAR *buffer);

       int pcre2_substring_get_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_UCHAR **bufferptr, PCRE2_SIZE *bufflen);

       int pcre2_substring_get_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_UCHAR **bufferptr,
         PCRE2_SIZE *bufflen);

       int pcre2_substring_length_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_SIZE *length);

       int pcre2_substring_length_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_SIZE *length);

       int pcre2_substring_nametable_scan(const pcre2_code *code,
         PCRE2_SPTR name, PCRE2_SPTR *first, PCRE2_SPTR *last);

       int pcre2_substring_number_from_name(const pcre2_code *code,
         PCRE2_SPTR name);

       void pcre2_substring_list_free(PCRE2_SPTR *list);

       int pcre2_substring_list_get(pcre2_match_data *match_data,
         PCRE2_UCHAR ***listptr, PCRE2_SIZE **lengthsptr);


PCRE2 NATIVE API STRING SUBSTITUTION FUNCTION

       int pcre2_substitute(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext, PCRE2_SPTR replacementzfP,
         PCRE2_SIZE rlength, PCRE2_UCHAR *outputbuffer,
         PCRE2_SIZE *outlengthptr);


PCRE2 NATIVE API JIT FUNCTIONS

       int pcre2_jit_compile(pcre2_code *code, uint32_t options);

       int pcre2_jit_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext);

       void pcre2_jit_free_unused_memory(pcre2_general_context *gcontext);

       pcre2_jit_stack *pcre2_jit_stack_create(PCRE2_SIZE startsize,
         PCRE2_SIZE maxsize, pcre2_general_context *gcontext);

       void pcre2_jit_stack_assign(pcre2_match_context *mcontext,
         pcre2_jit_callback callback_function, void *callback_data);

       void pcre2_jit_stack_free(pcre2_jit_stack *jit_stack);


PCRE2 NATIVE API SERIALIZATION FUNCTIONS

       int32_t pcre2_serialize_decode(pcre2_code **codes,
         int32_t number_of_codes, const uint8_t *bytes,
         pcre2_general_context *gcontext);

       int32_t pcre2_serialize_encode(const pcre2_code **codes,
         int32_t number_of_codes, uint8_t **serialized_bytes,
         PCRE2_SIZE *serialized_size, pcre2_general_context *gcontext);

       void pcre2_serialize_free(uint8_t *bytes);

       int32_t pcre2_serialize_get_number_of_codes(const uint8_t *bytes);


PCRE2 NATIVE API AUXILIARY FUNCTIONS

       pcre2_code *pcre2_code_copy(const pcre2_code *code);

       pcre2_code *pcre2_code_copy_with_tables(const pcre2_code *code);

       int pcre2_get_error_message(int errorcode, PCRE2_UCHAR *buffer,
         PCRE2_SIZE bufflen);

       const unsigned char *pcre2_maketables(pcre2_general_context *gcontext);

       int pcre2_pattern_info(const pcre2 *code, uint32_t what, void *where);

       int pcre2_callout_enumerate(const pcre2_code *code,
         int (*callback)(pcre2_callout_enumerate_block *, void *),
         void *user_data);

       int pcre2_config(uint32_t what, void *where);


PCRE2 NATIVE API OBSOLETE FUNCTIONS

       int pcre2_set_recursion_limit(pcre2_match_context *mcontext,
         uint32_t value);

       int pcre2_set_recursion_memory_management(
         pcre2_match_context *mcontext,
         void *(*private_malloc)(PCRE2_SIZE, void *),
         void (*private_free)(void *, void *), void *memory_data);

       These  functions became obsolete at release 10.30 and are retained only
       for backward compatibility. They should not be used in  new  code.  The
       first  is  replaced by pcre2_set_depth_limit(); the second is no longer
       needed and has no effect (it always returns zero).


PCRE2 EXPERIMENTAL PATTERN CONVERSION FUNCTIONS

       pcre2_convert_context *pcre2_convert_context_create(
         pcre2_general_context *gcontext);

       pcre2_convert_context *pcre2_convert_context_copy(
         pcre2_convert_context *cvcontext);

       void pcre2_convert_context_free(pcre2_convert_context *cvcontext);

       int pcre2_set_glob_escape(pcre2_convert_context *cvcontext,
         uint32_t escape_char);

       int pcre2_set_glob_separator(pcre2_convert_context *cvcontext,
         uint32_t separator_char);

       int pcre2_pattern_convert(PCRE2_SPTR pattern, PCRE2_SIZE length,
         uint32_t options, PCRE2_UCHAR **buffer,
         PCRE2_SIZE *blength, pcre2_convert_context *cvcontext);

       void pcre2_converted_pattern_free(PCRE2_UCHAR *converted_pattern);

       These functions provide a way of  converting  non-PCRE2  patterns  into
       patterns  that  can  be  processed by pcre2_compile(). This facility is
       experimental and may be changed in future releases. At present, "globs"
       and  POSIX  basic  and  extended patterns can be converted. Details are
       given in the pcre2convert documentation.


PCRE2 8-BIT, 16-BIT, AND 32-BIT LIBRARIES

       There are three PCRE2 libraries, supporting 8-bit, 16-bit,  and  32-bit
       code  units,  respectively.  However,  there  is  just one header file,
       pcre2.h.  This contains the function prototypes and  other  definitions
       for all three libraries. One, two, or all three can be installed simul-
       taneously. On Unix-like systems the libraries  are  called  libpcre2-8,
       libpcre2-16, and libpcre2-32, and they can also co-exist with the orig-
       inal PCRE libraries.

       Character strings are passed to and from a PCRE2 library as a  sequence
       of  unsigned  integers  in  code  units of the appropriate width. Every
       PCRE2 function comes in three different forms, one  for  each  library,
       for example:

         pcre2_compile_8()
         pcre2_compile_16()
         pcre2_compile_32()

       There are also three different sets of data types:

         PCRE2_UCHAR8, PCRE2_UCHAR16, PCRE2_UCHAR32
         PCRE2_SPTR8,  PCRE2_SPTR16,  PCRE2_SPTR32

       The  UCHAR  types define unsigned code units of the appropriate widths.
       For example, PCRE2_UCHAR16 is usually defined as `uint16_t'.  The  SPTR
       types  are  constant  pointers  to the equivalent UCHAR types, that is,
       they are pointers to vectors of unsigned code units.

       Many applications use only one code unit width. For their  convenience,
       macros are defined whose names are the generic forms such as pcre2_com-
       pile() and  PCRE2_SPTR.  These  macros  use  the  value  of  the  macro
       PCRE2_CODE_UNIT_WIDTH  to generate the appropriate width-specific func-
       tion and macro names.  PCRE2_CODE_UNIT_WIDTH is not defined by default.
       An  application  must  define  it  to  be 8, 16, or 32 before including
       pcre2.h in order to make use of the generic names.

       Applications that use more than one code unit width can be linked  with
       more  than  one PCRE2 library, but must define PCRE2_CODE_UNIT_WIDTH to
       be 0 before including pcre2.h, and then use the  real  function  names.
       Any  code  that  is to be included in an environment where the value of
       PCRE2_CODE_UNIT_WIDTH is unknown should  also  use  the  real  function
       names. (Unfortunately, it is not possible in C code to save and restore
       the value of a macro.)

       If PCRE2_CODE_UNIT_WIDTH is not defined  before  including  pcre2.h,  a
       compiler error occurs.

       When  using  multiple  libraries  in an application, you must take care
       when processing any particular pattern to use  only  functions  from  a
       single  library.   For example, if you want to run a match using a pat-
       tern that was compiled with pcre2_compile_16(), you  must  do  so  with
       pcre2_match_16(), not pcre2_match_8() or pcre2_match_32().

       In  the  function summaries above, and in the rest of this document and
       other PCRE2 documents, functions and data  types  are  described  using
       their generic names, without the _8, _16, or _32 suffix.


PCRE2 API OVERVIEW

       PCRE2  has  its  own  native  API, which is described in this document.
       There are also some wrapper functions for the 8-bit library that corre-
       spond  to the POSIX regular expression API, but they do not give access
       to all the functionality of PCRE2. They are described in the pcre2posix
       documentation. Both these APIs define a set of C function calls.

       The  native  API  C data types, function prototypes, option values, and
       error codes are defined in the header file pcre2.h, which also contains
       definitions of PCRE2_MAJOR and PCRE2_MINOR, the major and minor release
       numbers for the library. Applications can use these to include  support
       for different releases of PCRE2.

       In a Windows environment, if you want to statically link an application
       program against a non-dll PCRE2 library, you must  define  PCRE2_STATIC
       before including pcre2.h.

       The  functions pcre2_compile() and pcre2_match() are used for compiling
       and matching regular expressions in a Perl-compatible manner. A  sample
       program that demonstrates the simplest way of using them is provided in
       the file called pcre2demo.c in the PCRE2 source distribution. A listing
       of  this  program  is  given  in  the  pcre2demo documentation, and the
       pcre2sample documentation describes how to compile and run it.

       The compiling and matching functions recognize various options that are
       passed as bits in an options argument. There are also some more compli-
       cated  parameters  such  as  custom  memory  management  functions  and
       resource  limits  that  are passed in "contexts" (which are just memory
       blocks, described below). Simple applications do not need to  make  use
       of contexts.

       Just-in-time  (JIT)  compiler  support  is an optional feature of PCRE2
       that can be built in  appropriate  hardware  environments.  It  greatly
       speeds  up  the  matching  performance  of  many patterns. Programs can
       request that it be used if  available  by  calling  pcre2_jit_compile()
       after a pattern has been successfully compiled by pcre2_compile(). This
       does nothing if JIT support is not available.

       More complicated programs might need to  make  use  of  the  specialist
       functions    pcre2_jit_stack_create(),    pcre2_jit_stack_free(),   and
       pcre2_jit_stack_assign() in order to  control  the  JIT  code's  memory
       usage.

       JIT matching is automatically used by pcre2_match() if it is available,
       unless the PCRE2_NO_JIT option is set. There is also a direct interface
       for  JIT  matching,  which gives improved performance at the expense of
       less sanity checking. The JIT-specific functions are discussed  in  the
       pcre2jit documentation.

       A  second  matching function, pcre2_dfa_match(), which is not Perl-com-
       patible, is also provided. This uses  a  different  algorithm  for  the
       matching.  The  alternative  algorithm finds all possible matches (at a
       given point in the subject), and scans the subject  just  once  (unless
       there  are  lookaround  assertions).  However,  this algorithm does not
       return captured substrings. A description of  the  two  matching  algo-
       rithms   and  their  advantages  and  disadvantages  is  given  in  the
       pcre2matching   documentation.   There   is   no   JIT   support    for
       pcre2_dfa_match().

       In  addition  to  the  main compiling and matching functions, there are
       convenience functions for extracting captured substrings from a subject
       string that has been matched by pcre2_match(). They are:

         pcre2_substring_copy_byname()
         pcre2_substring_copy_bynumber()
         pcre2_substring_get_byname()
         pcre2_substring_get_bynumber()
         pcre2_substring_list_get()
         pcre2_substring_length_byname()
         pcre2_substring_length_bynumber()
         pcre2_substring_nametable_scan()
         pcre2_substring_number_from_name()

       pcre2_substring_free()  and  pcre2_substring_list_free()  are also pro-
       vided, to free memory used for extracted strings.

       The function pcre2_substitute() can be called to match  a  pattern  and
       return  a  copy of the subject string with substitutions for parts that
       were matched.

       Functions whose names begin with pcre2_serialize_ are used  for  saving
       compiled patterns on disc or elsewhere, and reloading them later.

       Finally,  there  are functions for finding out information about a com-
       piled pattern (pcre2_pattern_info()) and about the  configuration  with
       which PCRE2 was built (pcre2_config()).

       Functions  with  names  ending with _free() are used for freeing memory
       blocks of various sorts. In all cases, if one  of  these  functions  is
       called with a NULL argument, it does nothing.


STRING LENGTHS AND OFFSETS

       The  PCRE2  API  uses  string  lengths and offsets into strings of code
       units in several places. These values are always  of  type  PCRE2_SIZE,
       which  is an unsigned integer type, currently always defined as size_t.
       The largest  value  that  can  be  stored  in  such  a  type  (that  is
       ~(PCRE2_SIZE)0)  is reserved as a special indicator for zero-terminated
       strings and unset offsets.  Therefore, the longest string that  can  be
       handled is one less than this maximum.


NEWLINES

       PCRE2 supports five different conventions for indicating line breaks in
       strings: a single CR (carriage return) character, a  single  LF  (line-
       feed) character, the two-character sequence CRLF, any of the three pre-
       ceding, or any Unicode newline sequence. The Unicode newline  sequences
       are  the  three just mentioned, plus the single characters VT (vertical
       tab, U+000B), FF (form feed, U+000C), NEL (next line, U+0085), LS (line
       separator, U+2028), and PS (paragraph separator, U+2029).

       Each  of  the first three conventions is used by at least one operating
       system as its standard newline sequence. When PCRE2 is built, a default
       can  be  specified.  The default default is LF, which is the Unix stan-
       dard. However, the newline convention can be changed by an  application
       when calling pcre2_compile(), or it can be specified by special text at
       the start of the pattern itself; this overrides any other settings. See
       the pcre2pattern page for details of the special character sequences.

       In  the  PCRE2  documentation  the  word "newline" is used to mean "the
       character or pair of characters that indicate a line break". The choice
       of  newline convention affects the handling of the dot, circumflex, and
       dollar metacharacters, the handling of #-comments in /x mode, and, when
       CRLF  is a recognized line ending sequence, the match position advance-
       ment for a non-anchored pattern. There is more detail about this in the
       section on pcre2_match() options below.

       The  choice of newline convention does not affect the interpretation of
       the \n or \r escape sequences, nor does it affect what \R matches; this
       has its own separate convention.


MULTITHREADING

       In  a multithreaded application it is important to keep thread-specific
       data separate from data that can be shared between threads.  The  PCRE2
       library  code  itself  is  thread-safe: it contains no static or global
       variables. The API is designed to be  fairly  simple  for  non-threaded
       applications  while at the same time ensuring that multithreaded appli-
       cations can use it.

       There are several different blocks of data that are used to pass infor-
       mation between the application and the PCRE2 libraries.

   The compiled pattern

       A  pointer  to  the  compiled form of a pattern is returned to the user
       when pcre2_compile() is successful. The data in the compiled pattern is
       fixed,  and  does not change when the pattern is matched. Therefore, it
       is thread-safe, that is, the same compiled pattern can be used by  more
       than one thread simultaneously. For example, an application can compile
       all its patterns at the start, before forking off multiple threads that
       use  them.  However,  if the just-in-time (JIT) optimization feature is
       being used, it needs separate memory stack areas for each  thread.  See
       the pcre2jit documentation for more details.

       In  a more complicated situation, where patterns are compiled only when
       they are first needed, but are still shared between  threads,  pointers
       to  compiled  patterns  must  be protected from simultaneous writing by
       multiple threads, at least until a pattern has been compiled. The logic
       can be something like this:

         Get a read-only (shared) lock (mutex) for pointer
         if (pointer == NULL)
           {
           Get a write (unique) lock for pointer
           pointer = pcre2_compile(...
           }
         Release the lock
         Use pointer in pcre2_match()

       Of  course,  testing  for compilation errors should also be included in
       the code.

       If JIT is being used, but the JIT compilation is not being done immedi-
       ately,  (perhaps  waiting  to  see if the pattern is used often enough)
       similar logic is required. JIT compilation updates a pointer within the
       compiled  code  block, so a thread must gain unique write access to the
       pointer    before    calling    pcre2_jit_compile().     Alternatively,
       pcre2_code_copy()  or  pcre2_code_copy_with_tables()  can  be  used  to
       obtain a private copy of the compiled code before calling the JIT  com-
       piler.

   Context blocks

       The  next main section below introduces the idea of "contexts" in which
       PCRE2 functions are called. A context is nothing more than a collection
       of parameters that control the way PCRE2 operates. Grouping a number of
       parameters together in a context is a convenient way of passing them to
       a  PCRE2  function without using lots of arguments. The parameters that
       are stored in contexts are in some sense  "advanced  features"  of  the
       API. Many straightforward applications will not need to use contexts.

       In a multithreaded application, if the parameters in a context are val-
       ues that are never changed, the same context can be  used  by  all  the
       threads. However, if any thread needs to change any value in a context,
       it must make its own thread-specific copy.

   Match blocks

       The matching functions need a block of memory for storing  the  results
       of a match. This includes details of what was matched, as well as addi-
       tional information such as the name of a (*MARK) setting.  Each  thread
       must provide its own copy of this memory.


PCRE2 CONTEXTS

       Some  PCRE2  functions have a lot of parameters, many of which are used
       only by specialist applications, for example,  those  that  use  custom
       memory  management  or  non-standard character tables. To keep function
       argument lists at a reasonable size, and at the same time to  keep  the
       API  extensible,  "uncommon" parameters are passed to certain functions
       in a context instead of directly. A context is just a block  of  memory
       that  holds  the  parameter  values.   Applications that do not need to
       adjust any of the context parameters  can  pass  NULL  when  a  context
       pointer is required.

       There  are  three different types of context: a general context that is
       relevant for several PCRE2 operations, a compile-time  context,  and  a
       match-time context.

   The general context

       At  present,  this  context  just  contains  pointers to (and data for)
       external memory management  functions  that  are  called  from  several
       places in the PCRE2 library. The context is named `general' rather than
       specifically `memory' because in future other fields may be  added.  If
       you  do not want to supply your own custom memory management functions,
       you do not need to bother with a general context. A general context  is
       created by:

       pcre2_general_context *pcre2_general_context_create(
         void *(*private_malloc)(PCRE2_SIZE, void *),
         void (*private_free)(void *, void *), void *memory_data);

       The  two  function pointers specify custom memory management functions,
       whose prototypes are:

         void *private_malloc(PCRE2_SIZE, void *);
         void  private_free(void *, void *);

       Whenever code in PCRE2 calls these functions, the final argument is the
       value of memory_data. Either of the first two arguments of the creation
       function may be NULL, in which case the system memory management  func-
       tions  malloc()  and free() are used. (This is not currently useful, as
       there are no other fields in a general context,  but  in  future  there
       might  be.)   The  private_malloc()  function  is used (if supplied) to
       obtain memory for storing the context, and all three values  are  saved
       as part of the context.

       Whenever  PCRE2  creates a data block of any kind, the block contains a
       pointer to the free() function that matches the malloc() function  that
       was  used.  When  the  time  comes  to free the block, this function is
       called.

       A general context can be copied by calling:

       pcre2_general_context *pcre2_general_context_copy(
         pcre2_general_context *gcontext);

       The memory used for a general context should be freed by calling:

       void pcre2_general_context_free(pcre2_general_context *gcontext);


   The compile context

       A compile context is required if you want to provide an external  func-
       tion  for  stack  checking  during compilation or to change the default
       values of any of the following compile-time parameters:

         What \R matches (Unicode newlines or CR, LF, CRLF only)
         PCRE2's character tables
         The newline character sequence
         The compile time nested parentheses limit
         The maximum length of the pattern string
         The extra options bits (none set by default)

       A compile context is also required if you are using custom memory  man-
       agement.   If  none of these apply, just pass NULL as the context argu-
       ment of pcre2_compile().

       A compile context is created, copied, and freed by the following  func-
       tions:

       pcre2_compile_context *pcre2_compile_context_create(
         pcre2_general_context *gcontext);

       pcre2_compile_context *pcre2_compile_context_copy(
         pcre2_compile_context *ccontext);

       void pcre2_compile_context_free(pcre2_compile_context *ccontext);

       A  compile  context  is created with default values for its parameters.
       These can be changed by calling the following functions, which return 0
       on success, or PCRE2_ERROR_BADDATA if invalid data is detected.

       int pcre2_set_bsr(pcre2_compile_context *ccontext,
         uint32_t value);

       The  value  must  be PCRE2_BSR_ANYCRLF, to specify that \R matches only
       CR, LF, or CRLF, or PCRE2_BSR_UNICODE, to specify that \R  matches  any
       Unicode line ending sequence. The value is used by the JIT compiler and
       by  the  two  interpreted   matching   functions,   pcre2_match()   and
       pcre2_dfa_match().

       int pcre2_set_character_tables(pcre2_compile_context *ccontext,
         const unsigned char *tables);

       The  value  must  be  the result of a call to pcre2_maketables(), whose
       only argument is a general context. This function builds a set of char-
       acter tables in the current locale.

       int pcre2_set_compile_extra_options(pcre2_compile_context *ccontext,
         uint32_t extra_options);

       As  PCRE2  has developed, almost all the 32 option bits that are avail-
       able in the options argument of pcre2_compile() have been used  up.  To
       avoid  running  out, the compile context contains a set of extra option
       bits which are used for some newer, assumed rarer, options. This  func-
       tion  sets  those bits. It always sets all the bits (either on or off).
       It does not modify any existing  setting.  The  available  options  are
       defined in the section entitled "Extra compile options" below.

       int pcre2_set_max_pattern_length(pcre2_compile_context *ccontext,
         PCRE2_SIZE value);

       This  sets a maximum length, in code units, for any pattern string that
       is compiled with this context. If the pattern is longer,  an  error  is
       generated.   This facility is provided so that applications that accept
       patterns from external sources can limit their size. The default is the
       largest  number  that  a  PCRE2_SIZE variable can hold, which is effec-
       tively unlimited.

       int pcre2_set_newline(pcre2_compile_context *ccontext,
         uint32_t value);

       This specifies which characters or character sequences are to be recog-
       nized  as newlines. The value must be one of PCRE2_NEWLINE_CR (carriage
       return only), PCRE2_NEWLINE_LF (linefeed only), PCRE2_NEWLINE_CRLF (the
       two-character  sequence  CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any
       of the above), PCRE2_NEWLINE_ANY (any  Unicode  newline  sequence),  or
       PCRE2_NEWLINE_NUL (the NUL character, that is a binary zero).

       A pattern can override the value set in the compile context by starting
       with a sequence such as (*CRLF). See the pcre2pattern page for details.

       When   a   pattern   is   compiled   with   the    PCRE2_EXTENDED    or
       PCRE2_EXTENDED_MORE option, the newline convention affects the recogni-
       tion of white space and the end of internal comments starting  with  #.
       The  value is saved with the compiled pattern for subsequent use by the
       JIT  compiler  and  by  the   two   interpreted   matching   functions,
       pcre2_match() and pcre2_dfa_match().

       int pcre2_set_parens_nest_limit(pcre2_compile_context *ccontext,
         uint32_t value);

       This parameter ajusts the limit, set when PCRE2 is built (default 250),
       on the depth of parenthesis nesting in  a  pattern.  This  limit  stops
       rogue  patterns using up too much system stack when being compiled. The
       limit applies to parentheses of all kinds, not just capturing parenthe-
       ses.

       int pcre2_set_compile_recursion_guard(pcre2_compile_context *ccontext,
         int (*guard_function)(uint32_t, void *), void *user_data);

       There  is at least one application that runs PCRE2 in threads with very
       limited system stack, where running out of stack is to  be  avoided  at
       all  costs. The parenthesis limit above cannot take account of how much
       stack is actually available during compilation. For  a  finer  control,
       you  can  supply  a  function  that  is called whenever pcre2_compile()
       starts to compile a parenthesized part of a pattern. This function  can
       check  the  actual  stack  size  (or anything else that it wants to, of
       course).

       The first argument to the callout function gives the current  depth  of
       nesting,  and  the second is user data that is set up by the last argu-
       ment  of  pcre2_set_compile_recursion_guard().  The  callout   function
       should return zero if all is well, or non-zero to force an error.

   The match context

       A match context is required if you want to:

         Set up a callout function
         Set an offset limit for matching an unanchored pattern
         Change the limit on the amount of heap used when matching
         Change the backtracking match limit
         Change the backtracking depth limit
         Set custom memory management specifically for the match

       If  none  of  these  apply,  just  pass NULL as the context argument of
       pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match().

       A match context is created, copied, and freed by  the  following  func-
       tions:

       pcre2_match_context *pcre2_match_context_create(
         pcre2_general_context *gcontext);

       pcre2_match_context *pcre2_match_context_copy(
         pcre2_match_context *mcontext);

       void pcre2_match_context_free(pcre2_match_context *mcontext);

       A  match  context  is  created  with default values for its parameters.
       These can be changed by calling the following functions, which return 0
       on success, or PCRE2_ERROR_BADDATA if invalid data is detected.

       int pcre2_set_callout(pcre2_match_context *mcontext,
         int (*callout_function)(pcre2_callout_block *, void *),
         void *callout_data);

       This sets up a "callout" function for PCRE2 to call at specified points
       during a matching operation. Details are given in the pcre2callout doc-
       umentation.

       int pcre2_set_offset_limit(pcre2_match_context *mcontext,
         PCRE2_SIZE value);

       The  offset_limit  parameter  limits  how  far an unanchored search can
       advance in the subject string. The default value  is  PCRE2_UNSET.  The
       pcre2_match()      and      pcre2_dfa_match()      functions     return
       PCRE2_ERROR_NOMATCH if a match with a starting point before or  at  the
       given offset is not found. For example, if the pattern /abc/ is matched
       against "123abc" with an offset  limit  less  than  3,  the  result  is
       PCRE2_ERROR_NO_MATCH.   A  match  can never be found if the startoffset
       argument of pcre2_match() or pcre2_dfa_match() is greater than the off-
       set limit.

       When  using  this  facility,  you  must  set the PCRE2_USE_OFFSET_LIMIT
       option when calling pcre2_compile() so that when JIT is in use, differ-
       ent  code  can  be  compiled.  If a match is started with a non-default
       match limit when PCRE2_USE_OFFSET_LIMIT is not set, an error is  gener-
       ated.

       The  offset limit facility can be used to track progress when searching
       large subject strings.  See  also  the  PCRE2_FIRSTLINE  option,  which
       requires a match to start within the first line of the subject. If this
       is set with an offset limit, a match must occur in the first  line  and
       also  within  the  offset limit.  In other words, whichever limit comes
       first is used.

       int pcre2_set_heap_limit(pcre2_match_context *mcontext,
         uint32_t value);

       The heap_limit parameter specifies, in units of kilobytes, the  maximum
       amount  of  heap memory that pcre2_match() may use to hold backtracking
       information when running an interpretive match.  This  limit  does  not
       apply  to  matching with the JIT optimization, which has its own memory
       control arrangements (see the pcre2jit documentation for more details),
       nor  does  it apply to pcre2_dfa_match().  If the limit is reached, the
       negative error code  PCRE2_ERROR_HEAPLIMIT  is  returned.  The  default
       limit is set when PCRE2 is built; the default default is very large and
       is essentially "unlimited".

       A value for the heap limit may also be supplied by an item at the start
       of a pattern of the form

         (*LIMIT_HEAP=ddd)

       where  ddd  is  a  decimal  number.  However, such a setting is ignored
       unless ddd is less than the limit set by the  caller  of  pcre2_match()
       or, if no such limit is set, less than the default.

       The  pcre2_match() function starts out using a 20K vector on the system
       stack for recording backtracking points. The more  nested  backtracking
       points there are (that is, the deeper the search tree), the more memory
       is needed.  Heap memory is used only  if  the  initial  vector  is  too
       small. If the heap limit is set to a value less than 21 (in particular,
       zero) no heap memory will be used. In this case, only patterns that  do
       not have a lot of nested backtracking can be successfully processed.

       int pcre2_set_match_limit(pcre2_match_context *mcontext,
         uint32_t value);

       The  match_limit  parameter  provides  a means of preventing PCRE2 from
       using up too many computing resources when processing patterns that are
       not going to match, but which have a very large number of possibilities
       in their search trees. The classic  example  is  a  pattern  that  uses
       nested unlimited repeats.

       There  is an internal counter in pcre2_match() that is incremented each
       time round its main matching loop. If  this  value  reaches  the  match
       limit, pcre2_match() returns the negative value PCRE2_ERROR_MATCHLIMIT.
       This has the effect of limiting the amount  of  backtracking  that  can
       take place. For patterns that are not anchored, the count restarts from
       zero for each position in the subject string. This limit  also  applies
       to pcre2_dfa_match(), though the counting is done in a different way.

       When  pcre2_match() is called with a pattern that was successfully pro-
       cessed by pcre2_jit_compile(), the way in which matching is executed is
       entirely  different. However, there is still the possibility of runaway
       matching that goes on for a very long  time,  and  so  the  match_limit
       value  is  also used in this case (but in a different way) to limit how
       long the matching can continue.

       The default value for the limit can be set when  PCRE2  is  built;  the
       default  default  is 10 million, which handles all but the most extreme
       cases. A value for the match limit may also be supplied by an  item  at
       the start of a pattern of the form

         (*LIMIT_MATCH=ddd)

       where  ddd  is  a  decimal  number.  However, such a setting is ignored
       unless ddd is less than the limit set by the caller of pcre2_match() or
       pcre2_dfa_match() or, if no such limit is set, less than the default.

       int pcre2_set_depth_limit(pcre2_match_context *mcontext,
         uint32_t value);

       This   parameter   limits   the   depth   of   nested  backtracking  in
       pcre2_match().  Each time a nested backtracking point is passed, a  new
       memory "frame" is used to remember the state of matching at that point.
       Thus, this parameter indirectly limits the amount  of  memory  that  is
       used  in  a  match.  However,  because  the size of each memory "frame"
       depends on the number of capturing parentheses, the actual memory limit
       varies  from pattern to pattern. This limit was more useful in versions
       before 10.30, where function recursion was used for backtracking.

       The depth limit is not relevant, and is ignored, when matching is  done
       using JIT compiled code. However, it is supported by pcre2_dfa_match(),
       which uses it to limit the depth of internal recursive  function  calls
       that implement atomic groups, lookaround assertions, and pattern recur-
       sions. This is, therefore, an indirect limit on the  amount  of  system
       stack that is used. A recursive pattern such as /(.)(?1)/, when matched
       to a very long string using pcre2_dfa_match(), can use a great deal  of
       stack.

       The  default  value for the depth limit can be set when PCRE2 is built;
       the default default is the same value as  the  default  for  the  match
       limit.  If  the  limit  is exceeded, pcre2_match() or pcre2_dfa_match()
       returns PCRE2_ERROR_DEPTHLIMIT. A value for the depth limit may also be
       supplied by an item at the start of a pattern of the form

         (*LIMIT_DEPTH=ddd)

       where  ddd  is  a  decimal  number.  However, such a setting is ignored
       unless ddd is less than the limit set by the caller of pcre2_match() or
       pcre2_dfa_match() or, if no such limit is set, less than the default.


CHECKING BUILD-TIME OPTIONS

       int pcre2_config(uint32_t what, void *where);

       The  function  pcre2_config()  makes  it possible for a PCRE2 client to
       discover which optional features have  been  compiled  into  the  PCRE2
       library.  The  pcre2build  documentation  has  more details about these
       optional features.

       The first argument for pcre2_config() specifies  which  information  is
       required.  The  second  argument  is a pointer to memory into which the
       information is placed. If NULL is  passed,  the  function  returns  the
       amount  of  memory  that  is  needed for the requested information. For
       calls that return  numerical  values,  the  value  is  in  bytes;  when
       requesting  these  values,  where should point to appropriately aligned
       memory. For calls that return strings, the required length is given  in
       code units, not counting the terminating zero.

       When  requesting information, the returned value from pcre2_config() is
       non-negative on success, or the negative error code  PCRE2_ERROR_BADOP-
       TION  if the value in the first argument is not recognized. The follow-
       ing information is available:

         PCRE2_CONFIG_BSR

       The output is a uint32_t integer whose value indicates  what  character
       sequences  the  \R  escape  sequence  matches  by  default.  A value of
       PCRE2_BSR_UNICODE  means  that  \R  matches  any  Unicode  line  ending
       sequence;  a  value of PCRE2_BSR_ANYCRLF means that \R matches only CR,
       LF, or CRLF. The default can be overridden when a pattern is compiled.

         PCRE2_CONFIG_DEPTHLIMIT

       The output is a uint32_t integer that gives the default limit  for  the
       depth  of  nested  backtracking in pcre2_match() or the depth of nested
       recursions and lookarounds in pcre2_dfa_match().  Further  details  are
       given with pcre2_set_depth_limit() above.

         PCRE2_CONFIG_HEAPLIMIT

       The  output is a uint32_t integer that gives, in kilobytes, the default
       limit for the amount of heap  memory  used  by  pcre2_match().  Further
       details are given with pcre2_set_heap_limit() above.

         PCRE2_CONFIG_JIT

       The  output  is  a  uint32_t  integer that is set to one if support for
       just-in-time compiling is available; otherwise it is set to zero.

         PCRE2_CONFIG_JITTARGET

       The where argument should point to a buffer that is at  least  48  code
       units  long.  (The  exact  length  required  can  be  found  by calling
       pcre2_config() with where set to NULL.) The buffer  is  filled  with  a
       string  that  contains  the  name of the architecture for which the JIT
       compiler is  configured,  for  example  "x86  32bit  (little  endian  +
       unaligned)".  If JIT support is not available, PCRE2_ERROR_BADOPTION is
       returned, otherwise the number of code units used is returned. This  is
       the length of the string, plus one unit for the terminating zero.

         PCRE2_CONFIG_LINKSIZE

       The output is a uint32_t integer that contains the number of bytes used
       for internal linkage in compiled regular  expressions.  When  PCRE2  is
       configured,  the value can be set to 2, 3, or 4, with the default being
       2. This is the value that is returned by pcre2_config(). However,  when
       the  16-bit  library  is compiled, a value of 3 is rounded up to 4, and
       when the 32-bit library is compiled, internal  linkages  always  use  4
       bytes, so the configured value is not relevant.

       The default value of 2 for the 8-bit and 16-bit libraries is sufficient
       for all but the most massive patterns, since it allows the size of  the
       compiled pattern to be up to 64K code units. Larger values allow larger
       regular expressions to be compiled by those two libraries, but  at  the
       expense of slower matching.

         PCRE2_CONFIG_MATCHLIMIT

       The output is a uint32_t integer that gives the default match limit for
       pcre2_match(). Further details are given  with  pcre2_set_match_limit()
       above.

         PCRE2_CONFIG_NEWLINE

       The  output  is  a  uint32_t  integer whose value specifies the default
       character sequence that is recognized as meaning "newline". The  values
       are:

         PCRE2_NEWLINE_CR       Carriage return (CR)
         PCRE2_NEWLINE_LF       Linefeed (LF)
         PCRE2_NEWLINE_CRLF     Carriage return, linefeed (CRLF)
         PCRE2_NEWLINE_ANY      Any Unicode line ending
         PCRE2_NEWLINE_ANYCRLF  Any of CR, LF, or CRLF
         PCRE2_NEWLINE_NUL      The NUL character (binary zero)

       The  default  should  normally  correspond to the standard sequence for
       your operating system.

         PCRE2_CONFIG_PARENSLIMIT

       The output is a uint32_t integer that gives the maximum depth of  nest-
       ing of parentheses (of any kind) in a pattern. This limit is imposed to
       cap the amount of system stack used when a pattern is compiled.  It  is
       specified  when PCRE2 is built; the default is 250. This limit does not
       take into account the stack that may already be  used  by  the  calling
       application.  For  finer  control  over  compilation  stack  usage, see
       pcre2_set_compile_recursion_guard().

         PCRE2_CONFIG_STACKRECURSE

       This parameter is obsolete and should not be used in new code. The out-
       put is a uint32_t integer that is always set to zero.

         PCRE2_CONFIG_UNICODE_VERSION

       The  where  argument  should point to a buffer that is at least 24 code
       units long.  (The  exact  length  required  can  be  found  by  calling
       pcre2_config()  with  where  set  to  NULL.) If PCRE2 has been compiled
       without Unicode support, the buffer is filled with  the  text  "Unicode
       not  supported".  Otherwise,  the  Unicode version string (for example,
       "8.0.0") is inserted. The number of code units used is  returned.  This
       is the length of the string plus one unit for the terminating zero.

         PCRE2_CONFIG_UNICODE

       The  output is a uint32_t integer that is set to one if Unicode support
       is available; otherwise it is set to zero. Unicode support implies  UTF
       support.

         PCRE2_CONFIG_VERSION

       The  where  argument  should point to a buffer that is at least 24 code
       units long.  (The  exact  length  required  can  be  found  by  calling
       pcre2_config()  with  where set to NULL.) The buffer is filled with the
       PCRE2 version string, zero-terminated. The number of code units used is
       returned. This is the length of the string plus one unit for the termi-
       nating zero.


COMPILING A PATTERN

       pcre2_code *pcre2_compile(PCRE2_SPTR pattern, PCRE2_SIZE length,
         uint32_t options, int *errorcode, PCRE2_SIZE *erroroffset,
         pcre2_compile_context *ccontext);

       void pcre2_code_free(pcre2_code *code);

       pcre2_code *pcre2_code_copy(const pcre2_code *code);

       pcre2_code *pcre2_code_copy_with_tables(const pcre2_code *code);

       The pcre2_compile() function compiles a pattern into an internal  form.
       The  pattern  is  defined  by a pointer to a string of code units and a
       length. If the pattern is zero-terminated, the length can be  specified
       as  PCRE2_ZERO_TERMINATED. The function returns a pointer to a block of
       memory that contains the compiled pattern and related data, or NULL  if
       an error occurred.

       If  the  compile context argument ccontext is NULL, memory for the com-
       piled pattern  is  obtained  by  calling  malloc().  Otherwise,  it  is
       obtained  from  the  same memory function that was used for the compile
       context. The caller must free the memory by  calling  pcre2_code_free()
       when it is no longer needed.

       The function pcre2_code_copy() makes a copy of the compiled code in new
       memory, using the same memory allocator as was used for  the  original.
       However,  if  the  code  has  been  processed  by the JIT compiler (see
       below), the JIT information cannot be copied (because it  is  position-
       dependent).  The new copy can initially be used only for non-JIT match-
       ing, though it can be passed to pcre2_jit_compile() if required.

       The pcre2_code_copy() function provides a way for individual threads in
       a  multithreaded  application  to acquire a private copy of shared com-
       piled code.  However, it does not make a copy of the  character  tables
       used  by  the compiled pattern; the new pattern code points to the same
       tables as the original code.  (See "Locale Support" below  for  details
       of  these  character  tables.) In many applications the same tables are
       used throughout, so this behaviour is appropriate. Nevertheless,  there
       are occasions when a copy of a compiled pattern and the relevant tables
       are needed. The pcre2_code_copy_with_tables() provides  this  facility.
       Copies  of  both  the  code  and the tables are made, with the new code
       pointing to the new tables. The memory for the new tables is  automati-
       cally  freed  when  pcre2_code_free() is called for the new copy of the
       compiled code.

       NOTE: When one of the matching functions is  called,  pointers  to  the
       compiled pattern and the subject string are set in the match data block
       so that they can be referenced by the substring  extraction  functions.
       After  running a match, you must not free a compiled pattern (or a sub-
       ject string) until after all operations on the match  data  block  have
       taken place.

       The  options argument for pcre2_compile() contains various bit settings
       that affect the compilation. It  should  be  zero  if  no  options  are
       required.  The  available options are described below. Some of them (in
       particular, those that are compatible with Perl,  but  some  others  as
       well)  can  also  be  set  and  unset  from within the pattern (see the
       detailed description in the pcre2pattern documentation).

       For those options that can be different in different parts of the  pat-
       tern,  the contents of the options argument specifies their settings at
       the start of compilation. The  PCRE2_ANCHORED,  PCRE2_ENDANCHORED,  and
       PCRE2_NO_UTF_CHECK  options  can be set at the time of matching as well
       as at compile time.

       Other, less frequently required compile-time parameters  (for  example,
       the newline setting) can be provided in a compile context (as described
       above).

       If errorcode or erroroffset is NULL, pcre2_compile() returns NULL imme-
       diately.  Otherwise,  the  variables to which these point are set to an
       error code and an offset (number of code  units)  within  the  pattern,
       respectively,  when  pcre2_compile() returns NULL because a compilation
       error has occurred. The values are not defined when compilation is suc-
       cessful and pcre2_compile() returns a non-NULL value.

       The value returned in erroroffset is an indication of where in the pat-
       tern the error occurred. It is not necessarily the  furthest  point  in
       the  pattern  that  was  read. For example, after the error "lookbehind
       assertion is not fixed length", the error offset points to the start of
       the failing assertion.

       The  pcre2_get_error_message() function (see "Obtaining a textual error
       message" below) provides a textual message for each error code.  Compi-
       lation errors have positive error codes; UTF formatting error codes are
       negative. For an invalid UTF-8 or UTF-16 string, the offset is that  of
       the first code unit of the failing character.

       Some  errors are not detected until the whole pattern has been scanned;
       in these cases, the offset passed back is the length  of  the  pattern.
       Note  that  the  offset is in code units, not characters, even in a UTF
       mode. It may sometimes point into the middle of a UTF-8 or UTF-16 char-
       acter.

       This  code  fragment shows a typical straightforward call to pcre2_com-
       pile():

         pcre2_code *re;
         PCRE2_SIZE erroffset;
         int errorcode;
         re = pcre2_compile(
           "^A.*Z",                /* the pattern */
           PCRE2_ZERO_TERMINATED,  /* the pattern is zero-terminated */
           0,                      /* default options */
           &errorcode,             /* for error code */
           &erroffset,             /* for error offset */
           NULL);                  /* no compile context */

       The following names for option bits are defined in the  pcre2.h  header
       file:

         PCRE2_ANCHORED

       If this bit is set, the pattern is forced to be "anchored", that is, it
       is constrained to match only at the first matching point in the  string
       that  is being searched (the "subject string"). This effect can also be
       achieved by appropriate constructs in the pattern itself, which is  the
       only way to do it in Perl.

         PCRE2_ALLOW_EMPTY_CLASS

       By  default, for compatibility with Perl, a closing square bracket that
       immediately follows an opening one is treated as a data  character  for
       the  class.  When  PCRE2_ALLOW_EMPTY_CLASS  is  set,  it terminates the
       class, which therefore contains no characters and so can never match.

         PCRE2_ALT_BSUX

       This option request alternative handling  of  three  escape  sequences,
       which  makes  PCRE2's  behaviour more like ECMAscript (aka JavaScript).
       When it is set:

       (1) \U matches an upper case "U" character; by default \U causes a com-
       pile time error (Perl uses \U to upper case subsequent characters).

       (2) \u matches a lower case "u" character unless it is followed by four
       hexadecimal digits, in which case the hexadecimal  number  defines  the
       code  point  to match. By default, \u causes a compile time error (Perl
       uses it to upper case the following character).

       (3) \x matches a lower case "x" character unless it is followed by  two
       hexadecimal  digits,  in  which case the hexadecimal number defines the
       code point to match. By default, as in Perl, a  hexadecimal  number  is
       always expected after \x, but it may have zero, one, or two digits (so,
       for example, \xz matches a binary zero character followed by z).

         PCRE2_ALT_CIRCUMFLEX

       In  multiline  mode  (when  PCRE2_MULTILINE  is  set),  the  circumflex
       metacharacter  matches at the start of the subject (unless PCRE2_NOTBOL
       is set), and also after any internal  newline.  However,  it  does  not
       match after a newline at the end of the subject, for compatibility with
       Perl. If you want a multiline circumflex also to match after  a  termi-
       nating newline, you must set PCRE2_ALT_CIRCUMFLEX.

         PCRE2_ALT_VERBNAMES

       By  default, for compatibility with Perl, the name in any verb sequence
       such as (*MARK:NAME) is  any  sequence  of  characters  that  does  not
       include  a  closing  parenthesis. The name is not processed in any way,
       and it is not possible to include a closing parenthesis  in  the  name.
       However,  if  the  PCRE2_ALT_VERBNAMES  option is set, normal backslash
       processing is applied to verb  names  and  only  an  unescaped  closing
       parenthesis  terminates the name. A closing parenthesis can be included
       in a name either as \) or between \Q and \E. If the  PCRE2_EXTENDED  or
       PCRE2_EXTENDED_MORE  option  is set, unescaped whitespace in verb names
       is skipped and #-comments are recognized in this mode,  exactly  as  in
       the rest of the pattern.

         PCRE2_AUTO_CALLOUT

       If  this  bit  is  set,  pcre2_compile()  automatically inserts callout
       items, all with number 255, before each pattern  item,  except  immedi-
       ately  before  or after an explicit callout in the pattern. For discus-
       sion of the callout facility, see the pcre2callout documentation.

         PCRE2_CASELESS

       If this bit is set, letters in the pattern match both upper  and  lower
       case  letters in the subject. It is equivalent to Perl's /i option, and
       it can be changed within  a  pattern  by  a  (?i)  option  setting.  If
       PCRE2_UTF  is  set, Unicode properties are used for all characters with
       more than one other case, and for all characters whose code points  are
       greater  than  U+007f.  For lower valued characters with only one other
       case, a lookup table is used for speed. When PCRE2_UTF is  not  set,  a
       lookup table is used for all code points less than 256, and higher code
       points (available only in 16-bit or 32-bit mode)  are  treated  as  not
       having another case.

         PCRE2_DOLLAR_ENDONLY

       If  this bit is set, a dollar metacharacter in the pattern matches only
       at the end of the subject string. Without this option,  a  dollar  also
       matches  immediately before a newline at the end of the string (but not
       before any other newlines). The PCRE2_DOLLAR_ENDONLY option is  ignored
       if  PCRE2_MULTILINE  is  set.  There is no equivalent to this option in
       Perl, and no way to set it within a pattern.

         PCRE2_DOTALL

       If this bit is set, a dot metacharacter  in  the  pattern  matches  any
       character,  including  one  that  indicates a newline. However, it only
       ever matches one character, even if newlines are coded as CRLF. Without
       this option, a dot does not match when the current position in the sub-
       ject is at a newline. This option is equivalent to  Perl's  /s  option,
       and it can be changed within a pattern by a (?s) option setting. A neg-
       ative class such as [^a] always matches newline characters, independent
       of the setting of this option.

         PCRE2_DUPNAMES

       If  this  bit is set, names used to identify capturing subpatterns need
       not be unique. This can be helpful for certain types of pattern when it
       is  known  that  only  one instance of the named subpattern can ever be
       matched. There are more details of named subpatterns  below;  see  also
       the pcre2pattern documentation.

         PCRE2_ENDANCHORED

       If  this  bit is set, the end of any pattern match must be right at the
       end of the string being searched (the "subject string"). If the pattern
       match succeeds by reaching (*ACCEPT), but does not reach the end of the
       subject, the match fails at the current starting point. For  unanchored
       patterns,  a  new  match is then tried at the next starting point. How-
       ever, if the match succeeds by reaching the end of the pattern, but not
       the  end  of  the subject, backtracking occurs and an alternative match
       may be found. Consider these two patterns:

         .(*ACCEPT)|..
         .|..

       If matched against "abc" with PCRE2_ENDANCHORED set, the first  matches
       "c"  whereas  the  second matches "bc". The effect of PCRE2_ENDANCHORED
       can also be achieved by appropriate constructs in the  pattern  itself,
       which is the only way to do it in Perl.

       For DFA matching with pcre2_dfa_match(), PCRE2_ENDANCHORED applies only
       to the first (that is, the  longest)  matched  string.  Other  parallel
       matches,  which are necessarily substrings of the first one, must obvi-
       ously end before the end of the subject.

         PCRE2_EXTENDED

       If this bit is set, most white space  characters  in  the  pattern  are
       totally  ignored  except when escaped or inside a character class. How-
       ever, white space is not allowed within  sequences  such  as  (?>  that
       introduce various parenthesized subpatterns, nor within numerical quan-
       tifiers such as {1,3}.  Ignorable white space is permitted  between  an
       item  and a following quantifier and between a quantifier and a follow-
       ing + that indicates possessiveness.

       PCRE2_EXTENDED also causes characters between an unescaped # outside  a
       character  class  and the next newline, inclusive, to be ignored, which
       makes it possible to include comments inside complicated patterns. Note
       that  the  end of this type of comment is a literal newline sequence in
       the pattern; escape sequences that happen to represent a newline do not
       count.  PCRE2_EXTENDED is equivalent to Perl's /x option, and it can be
       changed within a pattern by a (?x) option setting.

       Which characters are interpreted as newlines can be specified by a set-
       ting  in  the compile context that is passed to pcre2_compile() or by a
       special sequence at the start of the pattern, as described in the  sec-
       tion  entitled "Newline conventions" in the pcre2pattern documentation.
       A default is defined when PCRE2 is built.

         PCRE2_EXTENDED_MORE

       This option  has  the  effect  of  PCRE2_EXTENDED,  but,  in  addition,
       unescaped  space  and  horizontal  tab  characters are ignored inside a
       character class.  PCRE2_EXTENDED_MORE is equivalent to Perl's 5.26  /xx
       option,  and  it can be changed within a pattern by a (?xx) option set-
       ting.

         PCRE2_FIRSTLINE

       If this option is set, the start of an unanchored pattern match must be
       before  or  at  the  first  newline  in  the subject string, though the
       matched text may continue over the  newline.  See  also  PCRE2_USE_OFF-
       SET_LIMIT,   which  provides  a  more  general  limiting  facility.  If
       PCRE2_FIRSTLINE is set with an offset limit, a match must occur in  the
       first  line and also within the offset limit. In other words, whichever
       limit comes first is used.

         PCRE2_LITERAL

       If this option is set, all meta-characters in the pattern are disabled,
       and  it is treated as a literal string. Matching literal strings with a
       regular expression engine is not the most efficient way of doing it. If
       you  are  doing  a  lot of literal matching and are worried about effi-
       ciency, you should consider using other approaches. The only other main
       options  that  are  allowed  with  PCRE2_LITERAL  are:  PCRE2_ANCHORED,
       PCRE2_ENDANCHORED, PCRE2_AUTO_CALLOUT, PCRE2_CASELESS, PCRE2_FIRSTLINE,
       PCRE2_NO_START_OPTIMIZE,     PCRE2_NO_UTF_CHECK,     PCRE2_UTF,     and
       PCRE2_USE_OFFSET_LIMIT. The extra  options  PCRE2_EXTRA_MATCH_LINE  and
       PCRE2_EXTRA_MATCH_WORD  are  also supported. Any other options cause an
       error.

         PCRE2_MATCH_UNSET_BACKREF

       If this option is set, a back reference to an  unset  subpattern  group
       matches  an  empty  string (by default this causes the current matching
       alternative to fail).  A pattern such as  (\1)(a)  succeeds  when  this
       option  is set (assuming it can find an "a" in the subject), whereas it
       fails by default, for Perl compatibility.  Setting  this  option  makes
       PCRE2 behave more like ECMAscript (aka JavaScript).

         PCRE2_MULTILINE

       By  default,  for  the purposes of matching "start of line" and "end of
       line", PCRE2 treats the subject string as consisting of a  single  line
       of  characters,  even  if  it actually contains newlines. The "start of
       line" metacharacter (^) matches only at the start of  the  string,  and
       the  "end  of  line"  metacharacter  ($) matches only at the end of the
       string,  or  before  a  terminating  newline  (except  when  PCRE2_DOL-
       LAR_ENDONLY  is  set).  Note, however, that unless PCRE2_DOTALL is set,
       the "any character" metacharacter (.) does not match at a newline. This
       behaviour (for ^, $, and dot) is the same as Perl.

       When  PCRE2_MULTILINE  it is set, the "start of line" and "end of line"
       constructs match immediately following or immediately  before  internal
       newlines  in  the  subject string, respectively, as well as at the very
       start and end. This is equivalent to Perl's /m option, and  it  can  be
       changed within a pattern by a (?m) option setting. Note that the "start
       of line" metacharacter does not match after a newline at the end of the
       subject,  for compatibility with Perl.  However, you can change this by
       setting the PCRE2_ALT_CIRCUMFLEX option. If there are no newlines in  a
       subject  string,  or  no  occurrences  of  ^ or $ in a pattern, setting
       PCRE2_MULTILINE has no effect.

         PCRE2_NEVER_BACKSLASH_C

       This option locks out the use of \C in the pattern that is  being  com-
       piled.   This  escape  can  cause  unpredictable  behaviour in UTF-8 or
       UTF-16 modes, because it may leave the current matching  point  in  the
       middle  of  a  multi-code-unit  character. This option may be useful in
       applications that process patterns from  external  sources.  Note  that
       there is also a build-time option that permanently locks out the use of
       \C.

         PCRE2_NEVER_UCP

       This option locks out the use of Unicode properties  for  handling  \B,
       \b, \D, \d, \S, \s, \W, \w, and some of the POSIX character classes, as
       described for the PCRE2_UCP option below. In  particular,  it  prevents
       the  creator of the pattern from enabling this facility by starting the
       pattern with (*UCP). This option may be  useful  in  applications  that
       process patterns from external sources. The option combination PCRE_UCP
       and PCRE_NEVER_UCP causes an error.

         PCRE2_NEVER_UTF

       This option locks out interpretation of the pattern as  UTF-8,  UTF-16,
       or UTF-32, depending on which library is in use. In particular, it pre-
       vents the creator of the pattern from switching to  UTF  interpretation
       by  starting  the  pattern  with  (*UTF).  This option may be useful in
       applications that process patterns from external sources. The  combina-
       tion of PCRE2_UTF and PCRE2_NEVER_UTF causes an error.

         PCRE2_NO_AUTO_CAPTURE

       If this option is set, it disables the use of numbered capturing paren-
       theses in the pattern. Any opening parenthesis that is not followed  by
       ?  behaves as if it were followed by ?: but named parentheses can still
       be used for capturing (and they acquire numbers in the usual way). This
       is  the  same as Perl's /n option.  Note that, when this option is set,
       references to capturing groups (back references or recursion/subroutine
       calls)  may  only refer to named groups, though the reference can be by
       name or by number.

         PCRE2_NO_AUTO_POSSESS

       If this option is set, it disables "auto-possessification", which is an
       optimization  that,  for example, turns a+b into a++b in order to avoid
       backtracks into a+ that can never be successful. However,  if  callouts
       are  in  use,  auto-possessification means that some callouts are never
       taken. You can set this option if you want the matching functions to do
       a  full  unoptimized  search and run all the callouts, but it is mainly
       provided for testing purposes.

         PCRE2_NO_DOTSTAR_ANCHOR

       If this option is set, it disables an optimization that is applied when
       .*  is  the  first significant item in a top-level branch of a pattern,
       and all the other branches also start with .* or with \A or  \G  or  ^.
       The  optimization  is  automatically disabled for .* if it is inside an
       atomic group or a capturing group that is the subject of a back  refer-
       ence,  or  if  the pattern contains (*PRUNE) or (*SKIP). When the opti-
       mization is not disabled, such a pattern is automatically  anchored  if
       PCRE2_DOTALL is set for all the .* items and PCRE2_MULTILINE is not set
       for any ^ items. Otherwise, the fact that any match must  start  either
       at  the start of the subject or following a newline is remembered. Like
       other optimizations, this can cause callouts to be skipped.

         PCRE2_NO_START_OPTIMIZE

       This is an option whose main effect is at matching time.  It  does  not
       change what pcre2_compile() generates, but it does affect the output of
       the JIT compiler.

       There are a number of optimizations that may occur at the  start  of  a
       match,  in  order  to speed up the process. For example, if it is known
       that an unanchored match must start with a specific  code  unit  value,
       the  matching code searches the subject for that value, and fails imme-
       diately if it cannot find it, without actually running the main  match-
       ing  function.  This means that a special item such as (*COMMIT) at the
       start of a pattern is not considered until after  a  suitable  starting
       point  for  the  match  has  been found. Also, when callouts or (*MARK)
       items are in use, these "start-up" optimizations can cause them  to  be
       skipped  if  the pattern is never actually used. The start-up optimiza-
       tions are in effect a pre-scan of the subject that takes  place  before
       the pattern is run.

       The PCRE2_NO_START_OPTIMIZE option disables the start-up optimizations,
       possibly causing performance to suffer,  but  ensuring  that  in  cases
       where  the  result is "no match", the callouts do occur, and that items
       such as (*COMMIT) and (*MARK) are considered at every possible starting
       position in the subject string.

       Setting  PCRE2_NO_START_OPTIMIZE  may  change the outcome of a matching
       operation.  Consider the pattern

         (*COMMIT)ABC

       When this is compiled, PCRE2 records the fact that a match  must  start
       with  the  character  "A".  Suppose the subject string is "DEFABC". The
       start-up optimization scans along the subject, finds "A" and  runs  the
       first  match attempt from there. The (*COMMIT) item means that the pat-
       tern must match the current starting position, which in this  case,  it
       does.  However,  if  the same match is run with PCRE2_NO_START_OPTIMIZE
       set, the initial scan along the subject string  does  not  happen.  The
       first  match  attempt  is  run  starting  from "D" and when this fails,
       (*COMMIT) prevents any further matches  being  tried,  so  the  overall
       result is "no match".

       There  are  also  other  start-up optimizations. For example, a minimum
       length for the subject may be recorded. Consider the pattern

         (*MARK:A)(X|Y)

       The minimum length for a match is one  character.  If  the  subject  is
       "ABC", there will be attempts to match "ABC", "BC", and "C". An attempt
       to match an empty string at the end of the subject does not take place,
       because  PCRE2  knows  that  the  subject  is now too short, and so the
       (*MARK) is never encountered. In this case, the optimization  does  not
       affect the overall match result, which is still "no match", but it does
       affect the auxiliary information that is returned.

         PCRE2_NO_UTF_CHECK

       When PCRE2_UTF is set, the validity of the pattern as a UTF  string  is
       automatically  checked.  There  are  discussions  about the validity of
       UTF-8 strings, UTF-16 strings, and UTF-32 strings in  the  pcre2unicode
       document.  If an invalid UTF sequence is found, pcre2_compile() returns
       a negative error code.

       If you know that your pattern is a valid UTF string, and  you  want  to
       skip   this   check   for   performance   reasons,   you  can  set  the
       PCRE2_NO_UTF_CHECK option. When it is set, the  effect  of  passing  an
       invalid UTF string as a pattern is undefined. It may cause your program
       to crash or loop.

       Note  that  this  option  can  also  be  passed  to  pcre2_match()  and
       pcre_dfa_match(),  to  suppress  UTF  validity  checking of the subject
       string.

       Note also that setting PCRE2_NO_UTF_CHECK at compile time does not dis-
       able  the error that is given if an escape sequence for an invalid Uni-
       code code point is encountered in the pattern. In particular,  the  so-
       called  "surrogate"  code points (0xd800 to 0xdfff) are invalid. If you
       want to allow escape  sequences  such  as  \x{d800}  you  can  set  the
       PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES  extra  option, as described in the
       section entitled "Extra compile options" below.  However, this is  pos-
       sible only in UTF-8 and UTF-32 modes, because these values are not rep-
       resentable in UTF-16.

         PCRE2_UCP

       This option changes the way PCRE2 processes \B, \b, \D, \d, \S, \s, \W,
       \w,  and  some  of  the POSIX character classes. By default, only ASCII
       characters are recognized, but if PCRE2_UCP is set, Unicode  properties
       are  used instead to classify characters. More details are given in the
       section on generic character types in the pcre2pattern page. If you set
       PCRE2_UCP,  matching one of the items it affects takes much longer. The
       option is available only if PCRE2 has been compiled with  Unicode  sup-
       port (which is the default).

         PCRE2_UNGREEDY

       This  option  inverts  the "greediness" of the quantifiers so that they
       are not greedy by default, but become greedy if followed by "?". It  is
       not  compatible  with Perl. It can also be set by a (?U) option setting
       within the pattern.

         PCRE2_USE_OFFSET_LIMIT

       This option must be set for pcre2_compile() if pcre2_set_offset_limit()
       is  going  to be used to set a non-default offset limit in a match con-
       text for matches that use this pattern. An error  is  generated  if  an
       offset  limit  is  set  without  this option. For more details, see the
       description of pcre2_set_offset_limit() in the section  that  describes
       match contexts. See also the PCRE2_FIRSTLINE option above.

         PCRE2_UTF

       This  option  causes  PCRE2  to regard both the pattern and the subject
       strings that are subsequently processed as strings  of  UTF  characters
       instead  of  single-code-unit  strings.  It  is available when PCRE2 is
       built to include Unicode support (which is  the  default).  If  Unicode
       support  is  not  available,  the use of this option provokes an error.
       Details of how PCRE2_UTF changes the behaviour of PCRE2  are  given  in
       the pcre2unicode page.

   Extra compile options

       Unlike  the  main compile-time options, the extra options are not saved
       with the compiled pattern. The option bits that can be set in a compile
       context  by  calling the pcre2_set_compile_extra_options() function are
       as follows:

         PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES

       This option applies when compiling a pattern in UTF-8 or  UTF-32  mode.
       It  is  forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode
       "surrogate" code points in the range 0xd800 to 0xdfff are used in pairs
       in  UTF-16  to  encode  code points with values in the range 0x10000 to
       0x10ffff. The surrogates cannot therefore  be  represented  in  UTF-16.
       They can be represented in UTF-8 and UTF-32, but are defined as invalid
       code points, and cause errors if  encountered  in  a  UTF-8  or  UTF-32
       string that is being checked for validity by PCRE2.

       These  values also cause errors if encountered in escape sequences such
       as \x{d912} within a pattern. However, it seems that some applications,
       when  using  PCRE2  to  check for unwanted characters in UTF-8 strings,
       explicitly  test  for  the  surrogates  using  escape  sequences.   The
       PCRE2_NO_UTF_CHECK  option  does  not  disable  the  error that occurs,
       because it applies only to the testing of input strings for UTF  valid-
       ity.

       If  the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surro-
       gate code point values in UTF-8 and UTF-32 patterns no  longer  provoke
       errors  and are incorporated in the compiled pattern. However, they can
       only match subject characters if the matching function is  called  with
       PCRE2_NO_UTF_CHECK set.

         PCRE2_EXTRA_BAD_ESCAPE_IS_LITERAL

       This  is a dangerous option. Use with care. By default, an unrecognized
       escape such as \j or a malformed one such as \x{2z} causes  a  compile-
       time error when detected by pcre2_compile(). Perl is somewhat inconsis-
       tent in handling such items: for example, \j is treated  as  a  literal
       "j",  and non-hexadecimal digits in \x{} are just ignored, though warn-
       ings are given in both cases if Perl's warning switch is enabled.  How-
       ever,  a  malformed  octal  number  after \o{ always causes an error in
       Perl.

       If the PCRE2_EXTRA_BAD_ESCAPE_IS_LITERAL  extra  option  is  passed  to
       pcre2_compile(),  all  unrecognized  or  erroneous escape sequences are
       treated as single-character escapes. For example, \j is a  literal  "j"
       and  \x{2z}  is  treated  as  the  literal string "x{2z}". Setting this
       option means that typos in patterns may go undetected  and  have  unex-
       pected results. This is a dangerous option. Use with care.

         PCRE2_EXTRA_MATCH_LINE

       This  option  is  provided  for  use  by the -x option of pcre2grep. It
       causes the pattern only to match complete lines. This  is  achieved  by
       automatically  inserting  the  code for "^(?:" at the start of the com-
       piled pattern and ")$" at the end. Thus, when PCRE2_MULTILINE  is  set,
       the  matched  line  may  be  in  the middle of the subject string. This
       option can be used with PCRE2_LITERAL.

         PCRE2_EXTRA_MATCH_WORD

       This option is provided for use by  the  -w  option  of  pcre2grep.  It
       causes  the  pattern only to match strings that have a word boundary at
       the start and the end. This is achieved by automatically inserting  the
       code  for "\b(?:" at the start of the compiled pattern and ")\b" at the
       end. The option may be used with PCRE2_LITERAL. However, it is  ignored
       if PCRE2_EXTRA_MATCH_LINE is also set.


COMPILATION ERROR CODES

       There  are  nearly  100  positive  error codes that pcre2_compile() may
       return (via errorcode) if it finds an error in the pattern.  There  are
       also  some  negative error codes that are used for invalid UTF strings.
       These are the same as given by pcre2_match() and pcre2_dfa_match(), and
       are  described  in the pcre2unicode page. The pcre2_get_error_message()
       function (see "Obtaining a textual error message" below) can be  called
       to obtain a textual error message from any error code.


JUST-IN-TIME (JIT) COMPILATION

       int pcre2_jit_compile(pcre2_code *code, uint32_t options);

       int pcre2_jit_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext);

       void pcre2_jit_free_unused_memory(pcre2_general_context *gcontext);

       pcre2_jit_stack *pcre2_jit_stack_create(PCRE2_SIZE startsize,
         PCRE2_SIZE maxsize, pcre2_general_context *gcontext);

       void pcre2_jit_stack_assign(pcre2_match_context *mcontext,
         pcre2_jit_callback callback_function, void *callback_data);

       void pcre2_jit_stack_free(pcre2_jit_stack *jit_stack);

       These  functions  provide  support  for  JIT compilation, which, if the
       just-in-time compiler is available, further processes a  compiled  pat-
       tern into machine code that executes much faster than the pcre2_match()
       interpretive matching function. Full details are given in the  pcre2jit
       documentation.

       JIT  compilation  is  a heavyweight optimization. It can take some time
       for patterns to be analyzed, and for one-off matches  and  simple  pat-
       terns  the benefit of faster execution might be offset by a much slower
       compilation time.  Most (but not all) patterns can be optimized by  the
       JIT compiler.


LOCALE SUPPORT

       PCRE2  handles caseless matching, and determines whether characters are
       letters, digits, or whatever, by reference to a set of tables,  indexed
       by  character  code  point.  This applies only to characters whose code
       points are less than 256. By default, higher-valued code  points  never
       match  escapes  such as \w or \d.  However, if PCRE2 is built with Uni-
       code support, all characters can be tested with \p and \P, or, alterna-
       tively,  the  PCRE2_UCP  option  can be set when a pattern is compiled;
       this causes \w and friends to use Unicode property support  instead  of
       the built-in tables.

       The  use  of  locales  with Unicode is discouraged. If you are handling
       characters with code points greater than 128,  you  should  either  use
       Unicode support, or use locales, but not try to mix the two.

       PCRE2  contains  an  internal  set of character tables that are used by
       default.  These are sufficient for  many  applications.  Normally,  the
       internal tables recognize only ASCII characters. However, when PCRE2 is
       built, it is possible to cause the internal tables to be rebuilt in the
       default "C" locale of the local system, which may cause them to be dif-
       ferent.

       The internal tables can be overridden by tables supplied by the  appli-
       cation  that  calls  PCRE2.  These may be created in a different locale
       from the default.  As more and more applications change to  using  Uni-
       code, the need for this locale support is expected to die away.

       External  tables  are built by calling the pcre2_maketables() function,
       in the relevant locale. The result can be passed to pcre2_compile()  as
       often   as  necessary,  by  creating  a  compile  context  and  calling
       pcre2_set_character_tables() to set the  tables  pointer  therein.  For
       example,  to  build  and use tables that are appropriate for the French
       locale (where accented characters with  values  greater  than  128  are
       treated as letters), the following code could be used:

         setlocale(LC_CTYPE, "fr_FR");
         tables = pcre2_maketables(NULL);
         ccontext = pcre2_compile_context_create(NULL);
         pcre2_set_character_tables(ccontext, tables);
         re = pcre2_compile(..., ccontext);

       The  locale  name "fr_FR" is used on Linux and other Unix-like systems;
       if you are using Windows, the name for the French locale  is  "french".
       It  is the caller's responsibility to ensure that the memory containing
       the tables remains available for as long as it is needed.

       The pointer that is passed (via the compile context) to pcre2_compile()
       is  saved  with  the  compiled pattern, and the same tables are used by
       pcre2_match() and pcre_dfa_match(). Thus, for any single pattern,  com-
       pilation  and  matching  both  happen in the same locale, but different
       patterns can be processed in different locales.


INFORMATION ABOUT A COMPILED PATTERN

       int pcre2_pattern_info(const pcre2 *code, uint32_t what, void *where);

       The pcre2_pattern_info() function returns general information  about  a
       compiled pattern. For information about callouts, see the next section.
       The first argument for pcre2_pattern_info() is a pointer  to  the  com-
       piled pattern. The second argument specifies which piece of information
       is required, and the third argument is  a  pointer  to  a  variable  to
       receive  the data. If the third argument is NULL, the first argument is
       ignored, and the function returns the size in  bytes  of  the  variable
       that is required for the information requested. Otherwise, the yield of
       the function is zero for success, or one of the following negative num-
       bers:

         PCRE2_ERROR_NULL           the argument code was NULL
         PCRE2_ERROR_BADMAGIC       the "magic number" was not found
         PCRE2_ERROR_BADOPTION      the value of what was invalid
         PCRE2_ERROR_UNSET          the requested field is not set

       The  "magic  number" is placed at the start of each compiled pattern as
       an simple check against passing an arbitrary memory pointer. Here is  a
       typical  call of pcre2_pattern_info(), to obtain the length of the com-
       piled pattern:

         int rc;
         size_t length;
         rc = pcre2_pattern_info(
           re,               /* result of pcre2_compile() */
           PCRE2_INFO_SIZE,  /* what is required */
           &length);         /* where to put the data */

       The possible values for the second argument are defined in pcre2.h, and
       are as follows:

         PCRE2_INFO_ALLOPTIONS
         PCRE2_INFO_ARGOPTIONS

       Return a copy of the pattern's options. The third argument should point
       to a  uint32_t  variable.  PCRE2_INFO_ARGOPTIONS  returns  exactly  the
       options  that were passed to pcre2_compile(), whereas PCRE2_INFO_ALLOP-
       TIONS returns the compile options as modified by any  top-level  (*XXX)
       option settings such as (*UTF) at the start of the pattern itself.

       For   example,   if  the  pattern  /(*UTF)abc/  is  compiled  with  the
       PCRE2_EXTENDED  option,  the  result   for   PCRE2_INFO_ALLOPTIONS   is
       PCRE2_EXTENDED  and  PCRE2_UTF.   Option settings such as (?i) that can
       change within a pattern do not affect the result  of  PCRE2_INFO_ALLOP-
       TIONS, even if they appear right at the start of the pattern. (This was
       different in some earlier releases.)

       A pattern compiled without PCRE2_ANCHORED is automatically anchored  by
       PCRE2 if the first significant item in every top-level branch is one of
       the following:

         ^     unless PCRE2_MULTILINE is set
         \A    always
         \G    always
         .*    sometimes - see below

       When .* is the first significant item, anchoring is possible only  when
       all the following are true:

         .* is not in an atomic group
         .* is not in a capturing group that is the subject
              of a back reference
         PCRE2_DOTALL is in force for .*
         Neither (*PRUNE) nor (*SKIP) appears in the pattern
         PCRE2_NO_DOTSTAR_ANCHOR is not set

       For  patterns  that are auto-anchored, the PCRE2_ANCHORED bit is set in
       the options returned for PCRE2_INFO_ALLOPTIONS.

         PCRE2_INFO_BACKREFMAX

       Return the number of the highest back reference  in  the  pattern.  The
       third  argument should point to an uint32_t variable. Named subpatterns
       acquire numbers as well as names, and these count towards  the  highest
       back  reference.   Back  references such as \4 or \g{12} match the cap-
       tured characters of the given group, but in addition, the check that  a
       capturing group is set in a conditional subpattern such as (?(3)a|b) is
       also a back reference. Zero is returned if there  are  no  back  refer-
       ences.

         PCRE2_INFO_BSR

       The output is a uint32_t whose value indicates what character sequences
       the \R escape sequence matches. A value of PCRE2_BSR_UNICODE means that
       \R  matches any Unicode line ending sequence; a value of PCRE2_BSR_ANY-
       CRLF means that \R matches only CR, LF, or CRLF.

         PCRE2_INFO_CAPTURECOUNT

       Return the highest capturing subpattern number in the pattern. In  pat-
       terns where (?| is not used, this is also the total number of capturing
       subpatterns.  The third argument should point to an uint32_t variable.

         PCRE2_INFO_DEPTHLIMIT

       If the pattern set a backtracking depth limit by including an  item  of
       the  form  (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The
       third argument should point to an unsigned 32-bit integer. If  no  such
       value  has been set, the call to pcre2_pattern_info() returns the error
       PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
       ing  if it is less than the limit set or defaulted by the caller of the
       match function.

         PCRE2_INFO_FIRSTBITMAP

       In the absence of a single first code unit for a non-anchored  pattern,
       pcre2_compile()  may construct a 256-bit table that defines a fixed set
       of values for the first code unit in any match. For example, a  pattern
       that  starts  with  [abc]  results in a table with three bits set. When
       code unit values greater than 255 are supported, the flag bit  for  255
       means  "any  code unit of value 255 or above". If such a table was con-
       structed, a pointer to it is returned. Otherwise NULL is returned.  The
       third argument should point to an const uint8_t * variable.

         PCRE2_INFO_FIRSTCODETYPE

       Return information about the first code unit of any matched string, for
       a non-anchored pattern. The third argument should point to an  uint32_t
       variable.  If there is a fixed first value, for example, the letter "c"
       from a pattern such as (cat|cow|coyote), 1 is returned, and  the  value
       can  be  retrieved using PCRE2_INFO_FIRSTCODEUNIT. If there is no fixed
       first value, but it is known that a match can occur only at  the  start
       of  the  subject  or following a newline in the subject, 2 is returned.
       Otherwise, and for anchored patterns, 0 is returned.

         PCRE2_INFO_FIRSTCODEUNIT

       Return the value of the first code unit of any  matched  string  for  a
       pattern  where  PCRE2_INFO_FIRSTCODETYPE returns 1; otherwise return 0.
       The third argument should point to an uint32_t variable. In  the  8-bit
       library,  the  value is always less than 256. In the 16-bit library the
       value can be up to 0xffff. In the 32-bit library  in  UTF-32  mode  the
       value can be up to 0x10ffff, and up to 0xffffffff when not using UTF-32
       mode.

         PCRE2_INFO_FRAMESIZE

       Return the size (in bytes) of the data frames that are used to remember
       backtracking  positions  when the pattern is processed by pcre2_match()
       without the use of JIT. The third argument should point  to  an  size_t
       variable. The frame size depends on the number of capturing parentheses
       in the pattern. Each additional capturing  group  adds  two  PCRE2_SIZE
       variables.

         PCRE2_INFO_HASBACKSLASHC

       Return  1 if the pattern contains any instances of \C, otherwise 0. The
       third argument should point to an uint32_t variable.

         PCRE2_INFO_HASCRORLF

       Return 1 if the pattern contains any explicit  matches  for  CR  or  LF
       characters, otherwise 0. The third argument should point to an uint32_t
       variable. An explicit match is either a literal CR or LF character,  or
       \r  or  \n  or  one  of  the  equivalent  hexadecimal  or  octal escape
       sequences.

         PCRE2_INFO_HEAPLIMIT

       If the pattern set a heap memory limit by including an item of the form
       (*LIMIT_HEAP=nnnn) at the start, the value is returned. The third argu-
       ment should point to an unsigned 32-bit integer. If no such  value  has
       been   set,   the   call  to  pcre2_pattern_info()  returns  the  error
       PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
       ing  if it is less than the limit set or defaulted by the caller of the
       match function.

         PCRE2_INFO_JCHANGED

       Return 1 if the (?J) or (?-J) option setting is used  in  the  pattern,
       otherwise  0.  The third argument should point to an uint32_t variable.
       (?J) and (?-J) set and unset the local PCRE2_DUPNAMES  option,  respec-
       tively.

         PCRE2_INFO_JITSIZE

       If  the  compiled  pattern was successfully processed by pcre2_jit_com-
       pile(), return the size of the  JIT  compiled  code,  otherwise  return
       zero. The third argument should point to a size_t variable.

         PCRE2_INFO_LASTCODETYPE

       Returns  1 if there is a rightmost literal code unit that must exist in
       any matched string, other than at its start. The third argument  should
       point  to  an  uint32_t  variable.  If  there  is  no  such value, 0 is
       returned. When 1 is  returned,  the  code  unit  value  itself  can  be
       retrieved  using PCRE2_INFO_LASTCODEUNIT. For anchored patterns, a last
       literal value is recorded only if  it  follows  something  of  variable
       length.  For example, for the pattern /^a\d+z\d+/ the returned value is
       1 (with "z" returned from PCRE2_INFO_LASTCODEUNIT), but  for  /^a\dz\d/
       the returned value is 0.

         PCRE2_INFO_LASTCODEUNIT

       Return  the value of the rightmost literal code unit that must exist in
       any matched string, other than  at  its  start,  for  a  pattern  where
       PCRE2_INFO_LASTCODETYPE returns 1. Otherwise, return 0. The third argu-
       ment should point to an uint32_t variable.

         PCRE2_INFO_MATCHEMPTY

       Return 1 if the pattern might match an empty string, otherwise  0.  The
       third  argument  should  point  to an uint32_t variable. When a pattern
       contains recursive subroutine calls it is not always possible to deter-
       mine  whether  or  not it can match an empty string. PCRE2 takes a cau-
       tious approach and returns 1 in such cases.

         PCRE2_INFO_MATCHLIMIT

       If the pattern set a match limit by  including  an  item  of  the  form
       (*LIMIT_MATCH=nnnn)  at  the  start,  the  value is returned. The third
       argument should point to an unsigned 32-bit integer. If no  such  value
       has  been  set,  the  call  to  pcre2_pattern_info()  returns the error
       PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
       ing  if it is less than the limit set or defaulted by the caller of the
       match function.

         PCRE2_INFO_MAXLOOKBEHIND

       Return the number of characters (not code units) in the longest lookbe-
       hind  assertion  in  the pattern. The third argument should point to an
       unsigned 32-bit integer. This information is useful when  doing  multi-
       segment  matching  using the partial matching facilities. Note that the
       simple assertions \b and \B require a one-character lookbehind. \A also
       registers  a  one-character  lookbehind,  though  it  does not actually
       inspect the previous character. This is to ensure  that  at  least  one
       character  from  the old segment is retained when a new segment is pro-
       cessed. Otherwise, if there are no lookbehinds in the pattern, \A might
       match incorrectly at the start of a second or subsequent segment.

         PCRE2_INFO_MINLENGTH

       If  a  minimum  length  for  matching subject strings was computed, its
       value is returned. Otherwise the returned value is 0. The  value  is  a
       number  of characters, which in UTF mode may be different from the num-
       ber of code units.  The third argument  should  point  to  an  uint32_t
       variable.  The  value  is  a  lower bound to the length of any matching
       string. There may not be any strings of that length  that  do  actually
       match, but every string that does match is at least that long.

         PCRE2_INFO_NAMECOUNT
         PCRE2_INFO_NAMEENTRYSIZE
         PCRE2_INFO_NAMETABLE

       PCRE2 supports the use of named as well as numbered capturing parenthe-
       ses. The names are just an additional way of identifying the  parenthe-
       ses, which still acquire numbers. Several convenience functions such as
       pcre2_substring_get_byname() are provided for extracting captured  sub-
       strings  by  name. It is also possible to extract the data directly, by
       first converting the name to a number in order to  access  the  correct
       pointers  in the output vector (described with pcre2_match() below). To
       do the conversion, you need to use the  name-to-number  map,  which  is
       described by these three values.

       The  map  consists  of a number of fixed-size entries. PCRE2_INFO_NAME-
       COUNT gives the number of entries, and  PCRE2_INFO_NAMEENTRYSIZE  gives
       the  size  of each entry in code units; both of these return a uint32_t
       value. The entry size depends on the length of the longest name.

       PCRE2_INFO_NAMETABLE returns a pointer to the first entry of the table.
       This  is  a  PCRE2_SPTR  pointer to a block of code units. In the 8-bit
       library, the first two bytes of each entry are the number of  the  cap-
       turing parenthesis, most significant byte first. In the 16-bit library,
       the pointer points to 16-bit code units, the first  of  which  contains
       the  parenthesis  number.  In the 32-bit library, the pointer points to
       32-bit code units, the first of which contains the parenthesis  number.
       The rest of the entry is the corresponding name, zero terminated.

       The  names are in alphabetical order. If (?| is used to create multiple
       groups with the same number, as described in the section  on  duplicate
       subpattern  numbers  in  the pcre2pattern page, the groups may be given
       the same name, but there is only one  entry  in  the  table.  Different
       names for groups of the same number are not permitted.

       Duplicate  names  for subpatterns with different numbers are permitted,
       but only if PCRE2_DUPNAMES is set. They appear  in  the  table  in  the
       order  in  which  they were found in the pattern. In the absence of (?|
       this is the order of increasing number; when (?| is used  this  is  not
       necessarily the case because later subpatterns may have lower numbers.

       As  a  simple  example of the name/number table, consider the following
       pattern after compilation by the 8-bit library  (assume  PCRE2_EXTENDED
       is set, so white space - including newlines - is ignored):

         (?<date> (?<year>(\d\d)?\d\d) -
         (?<month>\d\d) - (?<day>\d\d) )

       There  are  four  named subpatterns, so the table has four entries, and
       each entry in the table is eight bytes long. The table is  as  follows,
       with non-printing bytes shows in hexadecimal, and undefined bytes shown
       as ??:

         00 01 d  a  t  e  00 ??
         00 05 d  a  y  00 ?? ??
         00 04 m  o  n  t  h  00
         00 02 y  e  a  r  00 ??

       When writing code to extract data  from  named  subpatterns  using  the
       name-to-number  map,  remember that the length of the entries is likely
       to be different for each compiled pattern.

         PCRE2_INFO_NEWLINE

       The output is one of the following uint32_t values:

         PCRE2_NEWLINE_CR       Carriage return (CR)
         PCRE2_NEWLINE_LF       Linefeed (LF)
         PCRE2_NEWLINE_CRLF     Carriage return, linefeed (CRLF)
         PCRE2_NEWLINE_ANY      Any Unicode line ending
         PCRE2_NEWLINE_ANYCRLF  Any of CR, LF, or CRLF
         PCRE2_NEWLINE_NUL      The NUL character (binary zero)

       This identifies the character sequence that will be recognized as mean-
       ing "newline" while matching.

         PCRE2_INFO_SIZE

       Return  the  size  of  the  compiled  pattern  in  bytes (for all three
       libraries). The third argument should point to a size_t variable.  This
       value  includes  the  size  of the general data block that precedes the
       code units of the compiled pattern itself. The value that is used  when
       pcre2_compile()  is  getting memory in which to place the compiled pat-
       tern may be slightly larger than the value  returned  by  this  option,
       because  there are cases where the code that calculates the size has to
       over-estimate. Processing a pattern with  the  JIT  compiler  does  not
       alter the value returned by this option.


INFORMATION ABOUT A PATTERN'S CALLOUTS

       int pcre2_callout_enumerate(const pcre2_code *code,
         int (*callback)(pcre2_callout_enumerate_block *, void *),
         void *user_data);

       A script language that supports the use of string arguments in callouts
       might like to scan all the callouts in a  pattern  before  running  the
       match. This can be done by calling pcre2_callout_enumerate(). The first
       argument is a pointer to a compiled pattern, the  second  points  to  a
       callback  function,  and the third is arbitrary user data. The callback
       function is called for every callout in the pattern  in  the  order  in
       which they appear. Its first argument is a pointer to a callout enumer-
       ation block, and its second argument is the user_data  value  that  was
       passed  to  pcre2_callout_enumerate(). The contents of the callout enu-
       meration block are described in the pcre2callout  documentation,  which
       also gives further details about callouts.


SERIALIZATION AND PRECOMPILING

       It  is  possible  to  save  compiled patterns on disc or elsewhere, and
       reload them later, subject to a number of restrictions.  The  functions
       whose names begin with pcre2_serialize_ are used for this purpose. They
       are described in the pcre2serialize documentation.


THE MATCH DATA BLOCK

       pcre2_match_data *pcre2_match_data_create(uint32_t ovecsize,
         pcre2_general_context *gcontext);

       pcre2_match_data *pcre2_match_data_create_from_pattern(
         const pcre2_code *code, pcre2_general_context *gcontext);

       void pcre2_match_data_free(pcre2_match_data *match_data);

       Information about a successful or unsuccessful match  is  placed  in  a
       match  data  block,  which  is  an opaque structure that is accessed by
       function calls. In particular, the match data block contains  a  vector
       of  offsets into the subject string that define the matched part of the
       subject and any substrings that were captured. This  is  known  as  the
       ovector.

       Before  calling  pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
       you must create a match data block by calling one of the creation func-
       tions  above.  For pcre2_match_data_create(), the first argument is the
       number of pairs of offsets in the  ovector.  One  pair  of  offsets  is
       required to identify the string that matched the whole pattern, with an
       additional pair for each captured substring. For example, a value of  4
       creates  enough space to record the matched portion of the subject plus
       three captured substrings. A minimum of at least 1 pair is  imposed  by
       pcre2_match_data_create(), so it is always possible to return the over-
       all matched string.

       The second argument of pcre2_match_data_create() is a pointer to a gen-
       eral  context, which can specify custom memory management for obtaining
       the memory for the match data block. If you are not using custom memory
       management, pass NULL, which causes malloc() to be used.

       For  pcre2_match_data_create_from_pattern(),  the  first  argument is a
       pointer to a compiled pattern. The ovector is created to be exactly the
       right size to hold all the substrings a pattern might capture. The sec-
       ond argument is again a pointer to a general context, but in this  case
       if NULL is passed, the memory is obtained using the same allocator that
       was used for the compiled pattern (custom or default).

       A match data block can be used many times, with the same  or  different
       compiled  patterns. You can extract information from a match data block
       after  a  match  operation  has  finished,  using  functions  that  are
       described  in  the  sections  on  matched  strings and other match data
       below.

       When a call of pcre2_match() fails, valid  data  is  available  in  the
       match    block    only   when   the   error   is   PCRE2_ERROR_NOMATCH,
       PCRE2_ERROR_PARTIAL, or one of the  error  codes  for  an  invalid  UTF
       string. Exactly what is available depends on the error, and is detailed
       below.

       When one of the matching functions is called, pointers to the  compiled
       pattern  and the subject string are set in the match data block so that
       they can be referenced by the extraction  functions.  After  running  a
       match,  you  must not free a compiled pattern or a subject string until
       after all operations on the match data  block  (for  that  match)  have
       taken place.

       When  a match data block itself is no longer needed, it should be freed
       by calling pcre2_match_data_free().


MATCHING A PATTERN: THE TRADITIONAL FUNCTION

       int pcre2_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext);

       The function pcre2_match() is called to match a subject string  against
       a  compiled pattern, which is passed in the code argument. You can call
       pcre2_match() with the same code argument as many times as you like, in
       order  to  find multiple matches in the subject string or to match dif-
       ferent subject strings with the same pattern.

       This function is the main matching facility  of  the  library,  and  it
       operates  in  a  Perl-like  manner. For specialist use there is also an
       alternative matching function, which is described below in the  section
       about the pcre2_dfa_match() function.

       Here is an example of a simple call to pcre2_match():

         pcre2_match_data *md = pcre2_match_data_create(4, NULL);
         int rc = pcre2_match(
           re,             /* result of pcre2_compile() */
           "some string",  /* the subject string */
           11,             /* the length of the subject string */
           0,              /* start at offset 0 in the subject */
           0,              /* default options */
           match_data,     /* the match data block */
           NULL);          /* a match context; NULL means use defaults */

       If  the  subject  string is zero-terminated, the length can be given as
       PCRE2_ZERO_TERMINATED. A match context must be provided if certain less
       common matching parameters are to be changed. For details, see the sec-
       tion on the match context above.

   The string to be matched by pcre2_match()

       The subject string is passed to pcre2_match() as a pointer in  subject,
       a  length  in  length, and a starting offset in startoffset. The length
       and offset are in code units, not characters.  That  is,  they  are  in
       bytes  for the 8-bit library, 16-bit code units for the 16-bit library,
       and 32-bit code units for the 32-bit library, whether or not  UTF  pro-
       cessing is enabled.

       If startoffset is greater than the length of the subject, pcre2_match()
       returns PCRE2_ERROR_BADOFFSET. When the starting offset  is  zero,  the
       search  for a match starts at the beginning of the subject, and this is
       by far the most common case. In UTF-8 or UTF-16 mode, the starting off-
       set  must  point to the start of a character, or to the end of the sub-
       ject (in UTF-32 mode, one code unit equals one character, so  all  off-
       sets  are  valid).  Like  the  pattern  string, the subject may contain
       binary zeroes.

       A non-zero starting offset is useful when searching for  another  match
       in  the  same  subject  by calling pcre2_match() again after a previous
       success.  Setting startoffset differs from  passing  over  a  shortened
       string  and  setting  PCRE2_NOTBOL in the case of a pattern that begins
       with any kind of lookbehind. For example, consider the pattern

         \Biss\B

       which finds occurrences of "iss" in the middle of  words.  (\B  matches
       only  if  the  current position in the subject is not a word boundary.)
       When applied to the string "Mississipi" the first call to pcre2_match()
       finds  the first occurrence. If pcre2_match() is called again with just
       the remainder of the subject,  namely  "issipi",  it  does  not  match,
       because \B is always false at the start of the subject, which is deemed
       to be a word boundary. However, if pcre2_match() is passed  the  entire
       string again, but with startoffset set to 4, it finds the second occur-
       rence of "iss" because it is able to look behind the starting point  to
       discover that it is preceded by a letter.

       Finding  all  the  matches  in a subject is tricky when the pattern can
       match an empty string. It is possible to emulate Perl's /g behaviour by
       first   trying   the   match   again  at  the  same  offset,  with  the
       PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options,  and  then  if  that
       fails,  advancing  the  starting  offset  and  trying an ordinary match
       again. There is some code that demonstrates  how  to  do  this  in  the
       pcre2demo  sample  program. In the most general case, you have to check
       to see if the newline convention recognizes CRLF as a newline,  and  if
       so,  and the current character is CR followed by LF, advance the start-
       ing offset by two characters instead of one.

       If a non-zero starting offset is passed when the pattern is anchored, a
       single attempt to match at the given offset is made. This can only suc-
       ceed if the pattern does not require the match to be at  the  start  of
       the  subject.  In other words, the anchoring must be the result of set-
       ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL,  not
       by starting the pattern with ^ or \A.

   Option bits for pcre2_match()

       The unused bits of the options argument for pcre2_match() must be zero.
       The only bits that may be set  are  PCRE2_ANCHORED,  PCRE2_ENDANCHORED,
       PCRE2_NOTBOL,   PCRE2_NOTEOL,  PCRE2_NOTEMPTY,  PCRE2_NOTEMPTY_ATSTART,
       PCRE2_NO_JIT, PCRE2_NO_UTF_CHECK,  PCRE2_PARTIAL_HARD,  and  PCRE2_PAR-
       TIAL_SOFT.  Their action is described below.

       Setting  PCRE2_ANCHORED  or PCRE2_ENDANCHORED at match time is not sup-
       ported by the just-in-time (JIT) compiler. If it is set,  JIT  matching
       is  disabled  and  the interpretive code in pcre2_match() is run. Apart
       from PCRE2_NO_JIT (obviously), the remaining options are supported  for
       JIT matching.

         PCRE2_ANCHORED

       The PCRE2_ANCHORED option limits pcre2_match() to matching at the first
       matching position. If a pattern was compiled  with  PCRE2_ANCHORED,  or
       turned  out to be anchored by virtue of its contents, it cannot be made
       unachored at matching time. Note that setting the option at match  time
       disables JIT matching.

         PCRE2_ENDANCHORED

       If  the  PCRE2_ENDANCHORED option is set, any string that pcre2_match()
       matches must be right at the end of the subject string. Note that  set-
       ting the option at match time disables JIT matching.

         PCRE2_NOTBOL

       This option specifies that first character of the subject string is not
       the beginning of a line, so the  circumflex  metacharacter  should  not
       match  before  it.  Setting  this without having set PCRE2_MULTILINE at
       compile time causes circumflex never to match. This option affects only
       the behaviour of the circumflex metacharacter. It does not affect \A.

         PCRE2_NOTEOL

       This option specifies that the end of the subject string is not the end
       of a line, so the dollar metacharacter should not match it nor  (except
       in  multiline mode) a newline immediately before it. Setting this with-
       out having set PCRE2_MULTILINE at compile time causes dollar  never  to
       match. This option affects only the behaviour of the dollar metacharac-
       ter. It does not affect \Z or \z.

         PCRE2_NOTEMPTY

       An empty string is not considered to be a valid match if this option is
       set.  If  there are alternatives in the pattern, they are tried. If all
       the alternatives match the empty string, the entire  match  fails.  For
       example, if the pattern

         a?b?

       is  applied  to  a  string not beginning with "a" or "b", it matches an
       empty string at the start of the subject. With PCRE2_NOTEMPTY set, this
       match  is  not valid, so pcre2_match() searches further into the string
       for occurrences of "a" or "b".

         PCRE2_NOTEMPTY_ATSTART

       This is like PCRE2_NOTEMPTY, except that it locks out an  empty  string
       match only at the first matching position, that is, at the start of the
       subject plus the starting offset. An empty string match  later  in  the
       subject  is  permitted.   If  the pattern is anchored, such a match can
       occur only if the pattern contains \K.

         PCRE2_NO_JIT

       By  default,  if  a  pattern  has  been   successfully   processed   by
       pcre2_jit_compile(),  JIT  is  automatically used when pcre2_match() is
       called with options that JIT supports.  Setting  PCRE2_NO_JIT  disables
       the use of JIT; it forces matching to be done by the interpreter.

         PCRE2_NO_UTF_CHECK

       When PCRE2_UTF is set at compile time, the validity of the subject as a
       UTF string is checked by default  when  pcre2_match()  is  subsequently
       called.   If  a non-zero starting offset is given, the check is applied
       only to that part of the subject that could be inspected during  match-
       ing,  and there is a check that the starting offset points to the first
       code unit of a character or to the end of the subject. If there are  no
       lookbehind  assertions in the pattern, the check starts at the starting
       offset. Otherwise, it starts at the length of  the  longest  lookbehind
       before the starting offset, or at the start of the subject if there are
       not that many characters before the  starting  offset.  Note  that  the
       sequences \b and \B are one-character lookbehinds.

       The check is carried out before any other processing takes place, and a
       negative error code is returned if the check fails. There  are  several
       UTF  error  codes  for each code unit width, corresponding to different
       problems with the code unit sequence. There are discussions  about  the
       validity  of  UTF-8  strings, UTF-16 strings, and UTF-32 strings in the
       pcre2unicode page.

       If you know that your subject is valid, and  you  want  to  skip  these
       checks  for  performance  reasons,  you  can set the PCRE2_NO_UTF_CHECK
       option when calling pcre2_match(). You might want to do  this  for  the
       second and subsequent calls to pcre2_match() if you are making repeated
       calls to find other matches in the same subject string.

       WARNING: When PCRE2_NO_UTF_CHECK is  set,  the  effect  of  passing  an
       invalid  string  as  a  subject, or an invalid value of startoffset, is
       undefined.  Your program may crash or loop indefinitely.

         PCRE2_PARTIAL_HARD
         PCRE2_PARTIAL_SOFT

       These options turn on the partial matching  feature.  A  partial  match
       occurs  if  the  end of the subject string is reached successfully, but
       there are not enough subject characters to complete the match. If  this
       happens  when  PCRE2_PARTIAL_SOFT  (but not PCRE2_PARTIAL_HARD) is set,
       matching continues by testing any remaining alternatives.  Only  if  no
       complete  match can be found is PCRE2_ERROR_PARTIAL returned instead of
       PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies  that
       the  caller  is prepared to handle a partial match, but only if no com-
       plete match can be found.

       If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In  this
       case,  if  a  partial match is found, pcre2_match() immediately returns
       PCRE2_ERROR_PARTIAL, without considering  any  other  alternatives.  In
       other words, when PCRE2_PARTIAL_HARD is set, a partial match is consid-
       ered to be more important that an alternative complete match.

       There is a more detailed discussion of partial and multi-segment match-
       ing, with examples, in the pcre2partial documentation.


NEWLINE HANDLING WHEN MATCHING

       When  PCRE2 is built, a default newline convention is set; this is usu-
       ally the standard convention for the operating system. The default  can
       be  overridden  in a compile context by calling pcre2_set_newline(). It
       can also be overridden by starting a pattern string with, for  example,
       (*CRLF),  as  described  in  the  section on newline conventions in the
       pcre2pattern page. During matching, the newline choice affects the  be-
       haviour  of the dot, circumflex, and dollar metacharacters. It may also
       alter the way the match starting position is  advanced  after  a  match
       failure for an unanchored pattern.

       When PCRE2_NEWLINE_CRLF, PCRE2_NEWLINE_ANYCRLF, or PCRE2_NEWLINE_ANY is
       set as the newline convention, and a match attempt  for  an  unanchored
       pattern fails when the current starting position is at a CRLF sequence,
       and the pattern contains no explicit matches for CR or  LF  characters,
       the  match  position  is  advanced by two characters instead of one, in
       other words, to after the CRLF.

       The above rule is a compromise that makes the most common cases work as
       expected.  For  example,  if  the  pattern is .+A (and the PCRE2_DOTALL
       option is not set), it does not match the string "\r\nA" because, after
       failing  at the start, it skips both the CR and the LF before retrying.
       However, the pattern [\r\n]A does match that string,  because  it  con-
       tains an explicit CR or LF reference, and so advances only by one char-
       acter after the first failure.

       An explicit match for CR of LF is either a literal appearance of one of
       those  characters  in the pattern, or one of the \r or \n or equivalent
       octal or hexadecimal escape sequences. Implicit matches such as [^X] do
       not  count, nor does \s, even though it includes CR and LF in the char-
       acters that it matches.

       Notwithstanding the above, anomalous effects may still occur when  CRLF
       is a valid newline sequence and explicit \r or \n escapes appear in the
       pattern.


HOW PCRE2_MATCH() RETURNS A STRING AND CAPTURED SUBSTRINGS

       uint32_t pcre2_get_ovector_count(pcre2_match_data *match_data);

       PCRE2_SIZE *pcre2_get_ovector_pointer(pcre2_match_data *match_data);

       In general, a pattern matches a certain portion of the subject, and  in
       addition,  further  substrings  from  the  subject may be picked out by
       parenthesized parts of the pattern.  Following  the  usage  in  Jeffrey
       Friedl's  book,  this  is  called  "capturing" in what follows, and the
       phrase "capturing subpattern" or "capturing group" is used for a  frag-
       ment  of  a  pattern that picks out a substring. PCRE2 supports several
       other kinds of parenthesized subpattern that do not cause substrings to
       be  captured. The pcre2_pattern_info() function can be used to find out
       how many capturing subpatterns there are in a compiled pattern.

       You can use auxiliary functions for accessing  captured  substrings  by
       number or by name, as described in sections below.

       Alternatively, you can make direct use of the vector of PCRE2_SIZE val-
       ues, called  the  ovector,  which  contains  the  offsets  of  captured
       strings.   It   is   part  of  the  match  data  block.   The  function
       pcre2_get_ovector_pointer() returns the address  of  the  ovector,  and
       pcre2_get_ovector_count() returns the number of pairs of values it con-
       tains.

       Within the ovector, the first in each pair of values is set to the off-
       set of the first code unit of a substring, and the second is set to the
       offset of the first code unit after the end of a substring. These  val-
       ues  are always code unit offsets, not character offsets. That is, they
       are byte offsets in the 8-bit library, 16-bit  offsets  in  the  16-bit
       library, and 32-bit offsets in the 32-bit library.

       After  a  partial  match  (error  return PCRE2_ERROR_PARTIAL), only the
       first pair of offsets (that is, ovector[0]  and  ovector[1])  are  set.
       They  identify  the part of the subject that was partially matched. See
       the pcre2partial documentation for details of partial matching.

       After a fully successful match, the first pair  of  offsets  identifies
       the  portion  of the subject string that was matched by the entire pat-
       tern. The next pair is used for the first captured  substring,  and  so
       on.  The  value  returned by pcre2_match() is one more than the highest
       numbered pair that has been set. For example, if  two  substrings  have
       been  captured,  the returned value is 3. If there are no captured sub-
       strings, the return value from a successful match is 1, indicating that
       just the first pair of offsets has been set.

       If  a  pattern uses the \K escape sequence within a positive assertion,
       the reported start of a successful match can be greater than the end of
       the  match.   For  example,  if the pattern (?=ab\K) is matched against
       "ab", the start and end offset values for the match are 2 and 0.

       If a capturing subpattern group is matched repeatedly within  a  single
       match  operation, it is the last portion of the subject that it matched
       that is returned.

       If the ovector is too small to hold all the captured substring offsets,
       as  much  as possible is filled in, and the function returns a value of
       zero. If captured substrings are not of interest, pcre2_match() may  be
       called with a match data block whose ovector is of minimum length (that
       is, one pair).

       It is possible for capturing subpattern number n+1 to match  some  part
       of the subject when subpattern n has not been used at all. For example,
       if the string "abc" is matched  against  the  pattern  (a|(z))(bc)  the
       return from the function is 4, and subpatterns 1 and 3 are matched, but
       2 is not. When this happens, both values in  the  offset  pairs  corre-
       sponding to unused subpatterns are set to PCRE2_UNSET.

       Offset  values  that correspond to unused subpatterns at the end of the
       expression are also set to PCRE2_UNSET.  For  example,  if  the  string
       "abc" is matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3
       are not matched.  The return from the function is 2, because the  high-
       est used capturing subpattern number is 1. The offsets for for the sec-
       ond and third capturing  subpatterns  (assuming  the  vector  is  large
       enough, of course) are set to PCRE2_UNSET.

       Elements in the ovector that do not correspond to capturing parentheses
       in the pattern are never changed. That is, if a pattern contains n cap-
       turing parentheses, no more than ovector[0] to ovector[2n+1] are set by
       pcre2_match(). The other elements retain whatever  values  they  previ-
       ously had.


OTHER INFORMATION ABOUT A MATCH

       PCRE2_SPTR pcre2_get_mark(pcre2_match_data *match_data);

       PCRE2_SIZE pcre2_get_startchar(pcre2_match_data *match_data);

       As  well as the offsets in the ovector, other information about a match
       is retained in the match data block and can be retrieved by  the  above
       functions  in  appropriate  circumstances.  If they are called at other
       times, the result is undefined.

       After a successful match, a partial match (PCRE2_ERROR_PARTIAL),  or  a
       failure  to  match  (PCRE2_ERROR_NOMATCH), a (*MARK) name may be avail-
       able, and pcre2_get_mark() can be called. It returns a pointer  to  the
       zero-terminated  name,  which is within the compiled pattern. Otherwise
       NULL is returned. The length of the (*MARK) name (excluding the  termi-
       nating  zero)  is  stored  in the code unit that preceeds the name. You
       should use this instead of relying  on  the  terminating  zero  if  the
       (*MARK) name might contain a binary zero.

       After a successful match, the (*MARK) name that is returned is the last
       one encountered on the matching path through the pattern. After  a  "no
       match"  or  a  partial  match,  the  last  encountered  (*MARK) name is
       returned. For example, consider this pattern:

         ^(*MARK:A)((*MARK:B)a|b)c

       When it matches "bc", the returned mark is A. The B mark is  "seen"  in
       the  first  branch of the group, but it is not on the matching path. On
       the other hand, when this pattern fails to  match  "bx",  the  returned
       mark is B.

       After  a  successful  match, a partial match, or one of the invalid UTF
       errors (for example, PCRE2_ERROR_UTF8_ERR5), pcre2_get_startchar()  can
       be called. After a successful or partial match it returns the code unit
       offset of the character at which the match started. For  a  non-partial
       match,  this can be different to the value of ovector[0] if the pattern
       contains the \K escape sequence. After a partial match,  however,  this
       value  is  always the same as ovector[0] because \K does not affect the
       result of a partial match.

       After a UTF check failure, pcre2_get_startchar() can be used to  obtain
       the code unit offset of the invalid UTF character. Details are given in
       the pcre2unicode page.


ERROR RETURNS FROM pcre2_match()

       If pcre2_match() fails, it returns a negative number. This can be  con-
       verted  to a text string by calling the pcre2_get_error_message() func-
       tion (see "Obtaining a textual error message" below).   Negative  error
       codes  are  also  returned  by other functions, and are documented with
       them. The codes are given names in the header file. If UTF checking  is
       in force and an invalid UTF subject string is detected, one of a number
       of UTF-specific negative error codes is returned. Details are given  in
       the  pcre2unicode  page. The following are the other errors that may be
       returned by pcre2_match():

         PCRE2_ERROR_NOMATCH

       The subject string did not match the pattern.

         PCRE2_ERROR_PARTIAL

       The subject string did not match, but it did match partially.  See  the
       pcre2partial documentation for details of partial matching.

         PCRE2_ERROR_BADMAGIC

       PCRE2 stores a 4-byte "magic number" at the start of the compiled code,
       to catch the case when it is passed a junk pointer. This is  the  error
       that is returned when the magic number is not present.

         PCRE2_ERROR_BADMODE

       This  error is given when a compiled pattern is passed to a function in
       a library of a different code unit width, for example, a  pattern  com-
       piled  by  the  8-bit  library  is passed to a 16-bit or 32-bit library
       function.

         PCRE2_ERROR_BADOFFSET

       The value of startoffset was greater than the length of the subject.

         PCRE2_ERROR_BADOPTION

       An unrecognized bit was set in the options argument.

         PCRE2_ERROR_BADUTFOFFSET

       The UTF code unit sequence that was passed as a subject was checked and
       found  to be valid (the PCRE2_NO_UTF_CHECK option was not set), but the
       value of startoffset did not point to the beginning of a UTF  character
       or the end of the subject.

         PCRE2_ERROR_CALLOUT

       This  error  is never generated by pcre2_match() itself. It is provided
       for use by callout  functions  that  want  to  cause  pcre2_match()  or
       pcre2_callout_enumerate()  to  return a distinctive error code. See the
       pcre2callout documentation for details.

         PCRE2_ERROR_DEPTHLIMIT

       The nested backtracking depth limit was reached.

         PCRE2_ERROR_HEAPLIMIT

       The heap limit was reached.

         PCRE2_ERROR_INTERNAL

       An unexpected internal error has occurred. This error could  be  caused
       by a bug in PCRE2 or by overwriting of the compiled pattern.

         PCRE2_ERROR_JIT_STACKLIMIT

       This  error  is  returned  when a pattern that was successfully studied
       using JIT is being matched, but the memory available for  the  just-in-
       time  processing stack is not large enough. See the pcre2jit documenta-
       tion for more details.

         PCRE2_ERROR_MATCHLIMIT

       The backtracking match limit was reached.

         PCRE2_ERROR_NOMEMORY

       If a pattern contains many nested backtracking points, heap  memory  is
       used  to  remember them. This error is given when the memory allocation
       function (default or  custom)  fails.  Note  that  a  different  error,
       PCRE2_ERROR_HEAPLIMIT,  is given if the amount of memory needed exceeds
       the heap limit.

         PCRE2_ERROR_NULL

       Either the code, subject, or match_data argument was passed as NULL.

         PCRE2_ERROR_RECURSELOOP

       This error is returned when  pcre2_match()  detects  a  recursion  loop
       within  the  pattern. Specifically, it means that either the whole pat-
       tern or a subpattern has been called recursively for the second time at
       the  same  position  in  the  subject string. Some simple patterns that
       might do this are detected and faulted at compile time, but  more  com-
       plicated  cases,  in particular mutual recursions between two different
       subpatterns, cannot be detected until matching is attempted.


OBTAINING A TEXTUAL ERROR MESSAGE

       int pcre2_get_error_message(int errorcode, PCRE2_UCHAR *buffer,
         PCRE2_SIZE bufflen);

       A text message for an error code  from  any  PCRE2  function  (compile,
       match,  or  auxiliary)  can be obtained by calling pcre2_get_error_mes-
       sage(). The code is passed as the first argument,  with  the  remaining
       two  arguments  specifying  a  code  unit buffer and its length in code
       units, into which the text message is placed. The message  is  returned
       in  code  units  of the appropriate width for the library that is being
       used.

       The returned message is terminated with a trailing zero, and the  func-
       tion  returns  the  number  of  code units used, excluding the trailing
       zero.  If  the  error  number  is  unknown,  the  negative  error  code
       PCRE2_ERROR_BADDATA  is  returned. If the buffer is too small, the mes-
       sage is truncated (but still with a trailing zero),  and  the  negative
       error  code PCRE2_ERROR_NOMEMORY is returned.  None of the messages are
       very long; a buffer size of 120 code units is ample.


EXTRACTING CAPTURED SUBSTRINGS BY NUMBER

       int pcre2_substring_length_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_SIZE *length);

       int pcre2_substring_copy_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_UCHAR *buffer,
         PCRE2_SIZE *bufflen);

       int pcre2_substring_get_bynumber(pcre2_match_data *match_data,
         uint32_t number, PCRE2_UCHAR **bufferptr,
         PCRE2_SIZE *bufflen);

       void pcre2_substring_free(PCRE2_UCHAR *buffer);

       Captured substrings can be accessed directly by using  the  ovector  as
       described above.  For convenience, auxiliary functions are provided for
       extracting  captured  substrings  as  new,  separate,   zero-terminated
       strings. A substring that contains a binary zero is correctly extracted
       and has a further zero added on the end, but  the  result  is  not,  of
       course, a C string.

       The functions in this section identify substrings by number. The number
       zero refers to the entire matched substring, with higher numbers refer-
       ring  to  substrings  captured by parenthesized groups. After a partial
       match, only substring zero is available.  An  attempt  to  extract  any
       other  substring  gives the error PCRE2_ERROR_PARTIAL. The next section
       describes similar functions for extracting captured substrings by name.

       If a pattern uses the \K escape sequence within a  positive  assertion,
       the reported start of a successful match can be greater than the end of
       the match.  For example, if the pattern  (?=ab\K)  is  matched  against
       "ab",  the  start  and  end offset values for the match are 2 and 0. In
       this situation, calling these functions with a  zero  substring  number
       extracts a zero-length empty string.

       You  can  find the length in code units of a captured substring without
       extracting it by calling pcre2_substring_length_bynumber().  The  first
       argument  is a pointer to the match data block, the second is the group
       number, and the third is a pointer to a variable into which the  length
       is  placed.  If  you just want to know whether or not the substring has
       been captured, you can pass the third argument as NULL.

       The pcre2_substring_copy_bynumber() function  copies  a  captured  sub-
       string  into  a supplied buffer, whereas pcre2_substring_get_bynumber()
       copies it into new memory, obtained using the  same  memory  allocation
       function  that  was  used for the match data block. The first two argu-
       ments of these functions are a pointer to the match data  block  and  a
       capturing group number.

       The final arguments of pcre2_substring_copy_bynumber() are a pointer to
       the buffer and a pointer to a variable that contains its length in code
       units.  This is updated to contain the actual number of code units used
       for the extracted substring, excluding the terminating zero.

       For pcre2_substring_get_bynumber() the third and fourth arguments point
       to  variables that are updated with a pointer to the new memory and the
       number of code units that comprise the substring, again  excluding  the
       terminating  zero.  When  the substring is no longer needed, the memory
       should be freed by calling pcre2_substring_free().

       The return value from all these functions is zero  for  success,  or  a
       negative  error  code.  If  the pattern match failed, the match failure
       code is returned.  If a substring number  greater  than  zero  is  used
       after  a partial match, PCRE2_ERROR_PARTIAL is returned. Other possible
       error codes are:

         PCRE2_ERROR_NOMEMORY

       The buffer was too small for  pcre2_substring_copy_bynumber(),  or  the
       attempt to get memory failed for pcre2_substring_get_bynumber().

         PCRE2_ERROR_NOSUBSTRING

       There  is  no  substring  with that number in the pattern, that is, the
       number is greater than the number of capturing parentheses.

         PCRE2_ERROR_UNAVAILABLE

       The substring number, though not greater than the number of captures in
       the pattern, is greater than the number of slots in the ovector, so the
       substring could not be captured.

         PCRE2_ERROR_UNSET

       The substring did not participate in the match.  For  example,  if  the
       pattern  is  (abc)|(def) and the subject is "def", and the ovector con-
       tains at least two capturing slots, substring number 1 is unset.


EXTRACTING A LIST OF ALL CAPTURED SUBSTRINGS

       int pcre2_substring_list_get(pcre2_match_data *match_data,
         PCRE2_UCHAR ***listptr, PCRE2_SIZE **lengthsptr);

       void pcre2_substring_list_free(PCRE2_SPTR *list);

       The pcre2_substring_list_get() function  extracts  all  available  sub-
       strings  and  builds  a  list of pointers to them. It also (optionally)
       builds a second list that  contains  their  lengths  (in  code  units),
       excluding a terminating zero that is added to each of them. All this is
       done in a single block of memory that is obtained using the same memory
       allocation function that was used to get the match data block.

       This  function  must be called only after a successful match. If called
       after a partial match, the error code PCRE2_ERROR_PARTIAL is returned.

       The address of the memory block is returned via listptr, which is  also
       the start of the list of string pointers. The end of the list is marked
       by a NULL pointer. The address of the list of lengths is  returned  via
       lengthsptr.  If your strings do not contain binary zeros and you do not
       therefore need the lengths, you may supply NULL as the lengthsptr argu-
       ment  to  disable  the  creation of a list of lengths. The yield of the
       function is zero if all went well, or PCRE2_ERROR_NOMEMORY if the  mem-
       ory  block could not be obtained. When the list is no longer needed, it
       should be freed by calling pcre2_substring_list_free().

       If this function encounters a substring that is unset, which can happen
       when  capturing subpattern number n+1 matches some part of the subject,
       but subpattern n has not been used at all, it returns an empty  string.
       This  can  be  distinguished  from  a  genuine zero-length substring by
       inspecting  the  appropriate  offset  in  the  ovector,  which  contain
       PCRE2_UNSET   for   unset   substrings,   or   by   calling  pcre2_sub-
       string_length_bynumber().


EXTRACTING CAPTURED SUBSTRINGS BY NAME

       int pcre2_substring_number_from_name(const pcre2_code *code,
         PCRE2_SPTR name);

       int pcre2_substring_length_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_SIZE *length);

       int pcre2_substring_copy_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_UCHAR *buffer, PCRE2_SIZE *bufflen);

       int pcre2_substring_get_byname(pcre2_match_data *match_data,
         PCRE2_SPTR name, PCRE2_UCHAR **bufferptr, PCRE2_SIZE *bufflen);

       void pcre2_substring_free(PCRE2_UCHAR *buffer);

       To extract a substring by name, you first have to find associated  num-
       ber.  For example, for this pattern:

         (a+)b(?<xxx>\d+)...

       the number of the subpattern called "xxx" is 2. If the name is known to
       be unique (PCRE2_DUPNAMES was not set), you can find  the  number  from
       the name by calling pcre2_substring_number_from_name(). The first argu-
       ment is the compiled pattern, and the second is the name. The yield  of
       the function is the subpattern number, PCRE2_ERROR_NOSUBSTRING if there
       is no subpattern of  that  name,  or  PCRE2_ERROR_NOUNIQUESUBSTRING  if
       there  is  more than one subpattern of that name. Given the number, you
       can extract the substring directly from the ovector, or use one of  the
       "bynumber" functions described above.

       For  convenience,  there are also "byname" functions that correspond to
       the "bynumber" functions, the only difference  being  that  the  second
       argument  is  a  name instead of a number. If PCRE2_DUPNAMES is set and
       there are duplicate names, these functions scan all the groups with the
       given name, and return the first named string that is set.

       If  there are no groups with the given name, PCRE2_ERROR_NOSUBSTRING is
       returned. If all groups with the name have  numbers  that  are  greater
       than  the  number  of  slots in the ovector, PCRE2_ERROR_UNAVAILABLE is
       returned. If there is at least one group with a slot  in  the  ovector,
       but no group is found to be set, PCRE2_ERROR_UNSET is returned.

       Warning: If the pattern uses the (?| feature to set up multiple subpat-
       terns with the same number, as described in the  section  on  duplicate
       subpattern  numbers  in  the pcre2pattern page, you cannot use names to
       distinguish the different subpatterns, because names are  not  included
       in  the compiled code. The matching process uses only numbers. For this
       reason, the use of different names for subpatterns of the  same  number
       causes an error at compile time.


CREATING A NEW STRING WITH SUBSTITUTIONS

       int pcre2_substitute(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext, PCRE2_SPTR replacement,
         PCRE2_SIZE rlength, PCRE2_UCHAR *outputbufferP,
         PCRE2_SIZE *outlengthptr);

       This  function calls pcre2_match() and then makes a copy of the subject
       string in outputbuffer, replacing the part that was  matched  with  the
       replacement  string,  whose  length is supplied in rlength. This can be
       given as PCRE2_ZERO_TERMINATED for a zero-terminated string. Matches in
       which  a  \K item in a lookahead in the pattern causes the match to end
       before it starts are not supported, and give rise to an error return.

       The first seven arguments of pcre2_substitute() are  the  same  as  for
       pcre2_match(), except that the partial matching options are not permit-
       ted, and match_data may be passed as NULL, in which case a  match  data
       block  is obtained and freed within this function, using memory manage-
       ment functions from the match context, if provided, or else those  that
       were used to allocate memory for the compiled code.

       The  outlengthptr  argument  must point to a variable that contains the
       length, in code units, of the output buffer. If the  function  is  suc-
       cessful,  the value is updated to contain the length of the new string,
       excluding the trailing zero that is automatically added.

       If the function is not  successful,  the  value  set  via  outlengthptr
       depends  on  the  type  of  error. For syntax errors in the replacement
       string, the value is the offset in the  replacement  string  where  the
       error  was  detected.  For  other  errors,  the value is PCRE2_UNSET by
       default. This includes the case of the output buffer being  too  small,
       unless  PCRE2_SUBSTITUTE_OVERFLOW_LENGTH  is  set (see below), in which
       case the value is the minimum length needed, including  space  for  the
       trailing  zero.  Note  that  in  order  to compute the required length,
       pcre2_substitute() has  to  simulate  all  the  matching  and  copying,
       instead of giving an error return as soon as the buffer overflows. Note
       also that the length is in code units, not bytes.

       In the replacement string, which is interpreted as a UTF string in  UTF
       mode,  and  is  checked  for UTF validity unless the PCRE2_NO_UTF_CHECK
       option is set, a dollar character is an escape character that can spec-
       ify  the insertion of characters from capturing groups or (*MARK) items
       in the pattern. The following forms are always recognized:

         $$                  insert a dollar character
         $<n> or ${<n>}      insert the contents of group <n>
         $*MARK or ${*MARK}  insert the name of the last (*MARK) encountered

       Either a group number or a group name  can  be  given  for  <n>.  Curly
       brackets  are  required only if the following character would be inter-
       preted as part of the number or name. The number may be zero to include
       the  entire  matched  string.   For  example,  if  the pattern a(b)c is
       matched with "=abc=" and the replacement string "+$1$0$1+", the  result
       is "=+babcb+=".

       The facility for inserting a (*MARK) name can be used to perform simple
       simultaneous substitutions, as this pcre2test example shows:

         /(*:pear)apple|(*:orange)lemon/g,replace=${*MARK}
             apple lemon
          2: pear orange

       As well as the usual options for pcre2_match(), a number of  additional
       options can be set in the options argument.

       PCRE2_SUBSTITUTE_GLOBAL causes the function to iterate over the subject
       string, replacing every matching substring. If this is  not  set,  only
       the  first matching substring is replaced. If any matched substring has
       zero length, after the substitution has happened, an attempt to find  a
       non-empty  match at the same position is performed. If this is not suc-
       cessful, the current position is advanced by one character except  when
       CRLF  is  a  valid newline sequence and the next two characters are CR,
       LF. In this case, the current position is advanced by two characters.

       PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when  the  output
       buffer is too small. The default action is to return PCRE2_ERROR_NOMEM-
       ORY immediately. If this option  is  set,  however,  pcre2_substitute()
       continues to go through the motions of matching and substituting (with-
       out, of course, writing anything) in order to compute the size of  buf-
       fer  that  is  needed.  This  value is passed back via the outlengthptr
       variable,   with   the   result   of   the   function    still    being
       PCRE2_ERROR_NOMEMORY.

       Passing  a  buffer  size  of zero is a permitted way of finding out how
       much memory is needed for given substitution. However, this  does  mean
       that the entire operation is carried out twice. Depending on the appli-
       cation, it may be more efficient to allocate a large  buffer  and  free
       the   excess   afterwards,   instead  of  using  PCRE2_SUBSTITUTE_OVER-
       FLOW_LENGTH.

       PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references  to  capturing  groups
       that  do  not appear in the pattern to be treated as unset groups. This
       option should be used with care, because it means  that  a  typo  in  a
       group  name  or  number  no  longer  causes the PCRE2_ERROR_NOSUBSTRING
       error.

       PCRE2_SUBSTITUTE_UNSET_EMPTY causes unset capturing  groups  (including
       unknown  groups  when  PCRE2_SUBSTITUTE_UNKNOWN_UNSET  is  set)  to  be
       treated as empty strings when inserted  as  described  above.  If  this
       option  is  not  set,  an  attempt  to insert an unset group causes the
       PCRE2_ERROR_UNSET error. This option does not  influence  the  extended
       substitution syntax described below.

       PCRE2_SUBSTITUTE_EXTENDED  causes extra processing to be applied to the
       replacement string. Without this option, only the dollar  character  is
       special,  and  only  the  group insertion forms listed above are valid.
       When PCRE2_SUBSTITUTE_EXTENDED is set, two things change:

       Firstly, backslash in a replacement string is interpreted as an  escape
       character. The usual forms such as \n or \x{ddd} can be used to specify
       particular character codes, and backslash followed by any  non-alphanu-
       meric  character  quotes  that character. Extended quoting can be coded
       using \Q...\E, exactly as in pattern strings.

       There are also four escape sequences for forcing the case  of  inserted
       letters.   The  insertion  mechanism has three states: no case forcing,
       force upper case, and force lower case. The escape sequences change the
       current state: \U and \L change to upper or lower case forcing, respec-
       tively, and \E (when not terminating a \Q quoted sequence)  reverts  to
       no  case  forcing. The sequences \u and \l force the next character (if
       it is a letter) to upper or lower  case,  respectively,  and  then  the
       state automatically reverts to no case forcing. Case forcing applies to
       all inserted  characters, including those from captured groups and let-
       ters within \Q...\E quoted sequences.

       Note that case forcing sequences such as \U...\E do not nest. For exam-
       ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc";  the  final
       \E has no effect.

       The  second  effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
       flexibility to group substitution. The syntax is similar to  that  used
       by Bash:

         ${<n>:-<string>}
         ${<n>:+<string1>:<string2>}

       As  before,  <n> may be a group number or a name. The first form speci-
       fies a default value. If group <n> is set, its value  is  inserted;  if
       not,  <string>  is  expanded  and  the result inserted. The second form
       specifies strings that are expanded and inserted when group <n> is  set
       or  unset,  respectively. The first form is just a convenient shorthand
       for

         ${<n>:+${<n>}:<string>}

       Backslash can be used to escape colons and closing  curly  brackets  in
       the  replacement  strings.  A change of the case forcing state within a
       replacement string remains  in  force  afterwards,  as  shown  in  this
       pcre2test example:

         /(some)?(body)/substitute_extended,replace=${1:+\U:\L}HeLLo
             body
          1: hello
             somebody
          1: HELLO

       The  PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
       substitutions.  However,  PCRE2_SUBSTITUTE_UNKNOWN_UNSET   does   cause
       unknown groups in the extended syntax forms to be treated as unset.

       If  successful,  pcre2_substitute()  returns the number of replacements
       that were made. This may be zero if no matches were found, and is never
       greater than 1 unless PCRE2_SUBSTITUTE_GLOBAL is set.

       In the event of an error, a negative error code is returned. Except for
       PCRE2_ERROR_NOMATCH   (which   is   never   returned),   errors    from
       pcre2_match() are passed straight back.

       PCRE2_ERROR_NOSUBSTRING is returned for a non-existent substring inser-
       tion, unless PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set.

       PCRE2_ERROR_UNSET is returned for an unset substring insertion (includ-
       ing  an  unknown  substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
       when  the  simple  (non-extended)  syntax  is  used  and  PCRE2_SUBSTI-
       TUTE_UNSET_EMPTY is not set.

       PCRE2_ERROR_NOMEMORY  is  returned  if  the  output  buffer  is not big
       enough. If the PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option is set, the size
       of  buffer  that is needed is returned via outlengthptr. Note that this
       does not happen by default.

       PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax  errors  in
       the   replacement   string,   with   more   particular   errors   being
       PCRE2_ERROR_BADREPESCAPE (invalid  escape  sequence),  PCRE2_ERROR_REP-
       MISSING_BRACE  (closing curly bracket not found), PCRE2_BADSUBSTITUTION
       (syntax error in extended group substitution), and  PCRE2_BADSUBPATTERN
       (the  pattern  match ended before it started, which can happen if \K is
       used in an assertion).

       As for all PCRE2 errors, a text message that describes the error can be
       obtained   by   calling  the  pcre2_get_error_message()  function  (see
       "Obtaining a textual error message" above).


DUPLICATE SUBPATTERN NAMES

       int pcre2_substring_nametable_scan(const pcre2_code *code,
         PCRE2_SPTR name, PCRE2_SPTR *first, PCRE2_SPTR *last);

       When a pattern is compiled with the PCRE2_DUPNAMES  option,  names  for
       subpatterns  are  not required to be unique. Duplicate names are always
       allowed for subpatterns with the same number, created by using the  (?|
       feature.  Indeed,  if  such subpatterns are named, they are required to
       use the same names.

       Normally, patterns with duplicate names are such that in any one match,
       only  one of the named subpatterns participates. An example is shown in
       the pcre2pattern documentation.

       When  duplicates   are   present,   pcre2_substring_copy_byname()   and
       pcre2_substring_get_byname()  return  the first substring corresponding
       to  the  given  name  that  is  set.  Only   if   none   are   set   is
       PCRE2_ERROR_UNSET  is  returned. The pcre2_substring_number_from_name()
       function returns the error PCRE2_ERROR_NOUNIQUESUBSTRING when there are
       duplicate names.

       If  you want to get full details of all captured substrings for a given
       name, you must use the pcre2_substring_nametable_scan()  function.  The
       first  argument is the compiled pattern, and the second is the name. If
       the third and fourth arguments are NULL, the function returns  a  group
       number for a unique name, or PCRE2_ERROR_NOUNIQUESUBSTRING otherwise.

       When the third and fourth arguments are not NULL, they must be pointers
       to variables that are updated by the function. After it has  run,  they
       point to the first and last entries in the name-to-number table for the
       given name, and the function returns the length of each entry  in  code
       units.  In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
       no entries for the given name.

       The format of the name table is described above in the section entitled
       Information  about  a  pattern.  Given all the relevant entries for the
       name, you can extract each of their numbers,  and  hence  the  captured
       data.


FINDING ALL POSSIBLE MATCHES AT ONE POSITION

       The  traditional  matching  function  uses a similar algorithm to Perl,
       which stops when it finds the first match at a given point in the  sub-
       ject. If you want to find all possible matches, or the longest possible
       match at a given position,  consider  using  the  alternative  matching
       function  (see  below) instead. If you cannot use the alternative func-
       tion, you can kludge it up by making use of the callout facility, which
       is described in the pcre2callout documentation.

       What you have to do is to insert a callout right at the end of the pat-
       tern.  When your callout function is called, extract and save the  cur-
       rent  matched  substring.  Then return 1, which forces pcre2_match() to
       backtrack and try other alternatives. Ultimately, when it runs  out  of
       matches, pcre2_match() will yield PCRE2_ERROR_NOMATCH.


MATCHING A PATTERN: THE ALTERNATIVE FUNCTION

       int pcre2_dfa_match(const pcre2_code *code, PCRE2_SPTR subject,
         PCRE2_SIZE length, PCRE2_SIZE startoffset,
         uint32_t options, pcre2_match_data *match_data,
         pcre2_match_context *mcontext,
         int *workspace, PCRE2_SIZE wscount);

       The  function  pcre2_dfa_match()  is  called  to match a subject string
       against a compiled pattern, using a matching algorithm that  scans  the
       subject string just once (not counting lookaround assertions), and does
       not backtrack.  This has different characteristics to the normal  algo-
       rithm,  and  is not compatible with Perl. Some of the features of PCRE2
       patterns are not supported.  Nevertheless, there are  times  when  this
       kind  of  matching  can be useful. For a discussion of the two matching
       algorithms, and a list of features that pcre2_dfa_match() does not sup-
       port, see the pcre2matching documentation.

       The  arguments  for  the pcre2_dfa_match() function are the same as for
       pcre2_match(), plus two extras. The ovector within the match data block
       is used in a different way, and this is described below. The other com-
       mon arguments are used in the same way as for pcre2_match(),  so  their
       description is not repeated here.

       The  two  additional  arguments provide workspace for the function. The
       workspace vector should contain at least 20 elements. It  is  used  for
       keeping  track  of  multiple  paths  through  the  pattern  tree.  More
       workspace is needed for patterns and subjects where there are a lot  of
       potential matches.

       Here is an example of a simple call to pcre2_dfa_match():

         int wspace[20];
         pcre2_match_data *md = pcre2_match_data_create(4, NULL);
         int rc = pcre2_dfa_match(
           re,             /* result of pcre2_compile() */
           "some string",  /* the subject string */
           11,             /* the length of the subject string */
           0,              /* start at offset 0 in the subject */
           0,              /* default options */
           match_data,     /* the match data block */
           NULL,           /* a match context; NULL means use defaults */
           wspace,         /* working space vector */
           20);            /* number of elements (NOT size in bytes) */

   Option bits for pcre_dfa_match()

       The  unused  bits of the options argument for pcre2_dfa_match() must be
       zero. The only bits that may be set  are  PCRE2_ANCHORED,  PCRE2_ENDAN-
       CHORED,        PCRE2_NOTBOL,        PCRE2_NOTEOL,       PCRE2_NOTEMPTY,
       PCRE2_NOTEMPTY_ATSTART,     PCRE2_NO_UTF_CHECK,     PCRE2_PARTIAL_HARD,
       PCRE2_PARTIAL_SOFT,  PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but
       the last four of these are exactly the same as  for  pcre2_match(),  so
       their description is not repeated here.

         PCRE2_PARTIAL_HARD
         PCRE2_PARTIAL_SOFT

       These  have  the  same general effect as they do for pcre2_match(), but
       the details are slightly different. When PCRE2_PARTIAL_HARD is set  for
       pcre2_dfa_match(),  it  returns  PCRE2_ERROR_PARTIAL  if the end of the
       subject is reached and there is still at least one matching possibility
       that requires additional characters. This happens even if some complete
       matches have already been found. When PCRE2_PARTIAL_SOFT  is  set,  the
       return  code  PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
       if the end of the subject is  reached,  there  have  been  no  complete
       matches, but there is still at least one matching possibility. The por-
       tion of the string that was inspected when the  longest  partial  match
       was found is set as the first matching string in both cases. There is a
       more detailed discussion of partial and  multi-segment  matching,  with
       examples, in the pcre2partial documentation.

         PCRE2_DFA_SHORTEST

       Setting  the PCRE2_DFA_SHORTEST option causes the matching algorithm to
       stop as soon as it has found one match. Because of the way the alterna-
       tive  algorithm  works, this is necessarily the shortest possible match
       at the first possible matching point in the subject string.

         PCRE2_DFA_RESTART

       When pcre2_dfa_match() returns a partial match, it is possible to  call
       it again, with additional subject characters, and have it continue with
       the same match. The PCRE2_DFA_RESTART option requests this action; when
       it  is  set,  the workspace and wscount options must reference the same
       vector as before because data about the match so far is  left  in  them
       after a partial match. There is more discussion of this facility in the
       pcre2partial documentation.

   Successful returns from pcre2_dfa_match()

       When pcre2_dfa_match() succeeds, it may have matched more than one sub-
       string in the subject. Note, however, that all the matches from one run
       of the function start at the same point in  the  subject.  The  shorter
       matches  are all initial substrings of the longer matches. For example,
       if the pattern

         <.*>

       is matched against the string

         This is <something> <something else> <something further> no more

       the three matched strings are

         <something> <something else> <something further>
         <something> <something else>
         <something>

       On success, the yield of the function is a number  greater  than  zero,
       which  is  the  number  of  matched substrings. The offsets of the sub-
       strings are returned in the ovector, and can be extracted by number  in
       the  same way as for pcre2_match(), but the numbers bear no relation to
       any capturing groups that may exist in the pattern, because DFA  match-
       ing does not support group capture.

       Calls  to  the  convenience  functions  that extract substrings by name
       return the error PCRE2_ERROR_DFA_UFUNC (unsupported function)  if  used
       after a DFA match. The convenience functions that extract substrings by
       number never return PCRE2_ERROR_NOSUBSTRING, and the meanings  of  some
       other errors are slightly different:

         PCRE2_ERROR_UNAVAILABLE

       The ovector is not big enough to include a slot for the given substring
       number.

         PCRE2_ERROR_UNSET

       There is a slot in the ovector  for  this  substring,  but  there  were
       insufficient matches to fill it.

       The  matched  strings  are  stored  in  the ovector in reverse order of
       length; that is, the longest matching string is first.  If  there  were
       too  many matches to fit into the ovector, the yield of the function is
       zero, and the vector is filled with the longest matches.

       NOTE: PCRE2's "auto-possessification" optimization usually  applies  to
       character  repeats at the end of a pattern (as well as internally). For
       example, the pattern "a\d+" is compiled as if it were "a\d++". For  DFA
       matching,  this  means  that  only  one possible match is found. If you
       really do want multiple matches in such cases, either use  an  ungreedy
       repeat  such  as  "a\d+?"  or set the PCRE2_NO_AUTO_POSSESS option when
       compiling.

   Error returns from pcre2_dfa_match()

       The pcre2_dfa_match() function returns a negative number when it fails.
       Many  of  the  errors  are  the same as for pcre2_match(), as described
       above.  There are in addition the following errors that are specific to
       pcre2_dfa_match():

         PCRE2_ERROR_DFA_UITEM

       This  return  is  given  if pcre2_dfa_match() encounters an item in the
       pattern that it does not support, for instance, the use of \C in a  UTF
       mode or a back reference.

         PCRE2_ERROR_DFA_UCOND

       This  return  is given if pcre2_dfa_match() encounters a condition item
       that uses a back reference for the condition, or a test  for  recursion
       in a specific group. These are not supported.

         PCRE2_ERROR_DFA_WSSIZE

       This  return  is  given  if  pcre2_dfa_match() runs out of space in the
       workspace vector.

         PCRE2_ERROR_DFA_RECURSE

       When a recursive subpattern is processed, the matching  function  calls
       itself recursively, using private memory for the ovector and workspace.
       This error is given if the internal ovector is not large  enough.  This
       should be extremely rare, as a vector of size 1000 is used.

         PCRE2_ERROR_DFA_BADRESTART

       When  pcre2_dfa_match()  is  called  with the PCRE2_DFA_RESTART option,
       some plausibility checks are made on the  contents  of  the  workspace,
       which  should  contain data about the previous partial match. If any of
       these checks fail, this error is given.


SEE ALSO

       pcre2build(3),   pcre2callout(3),    pcre2demo(3),    pcre2matching(3),
       pcre2partial(3), pcre2posix(3), pcre2sample(3), pcre2unicode(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 10 July 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2BUILD(3)              Library Functions Manual              PCRE2BUILD(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

BUILDING PCRE2

       PCRE2  is distributed with a configure script that can be used to build
       the library in Unix-like environments using the applications  known  as
       Autotools. Also in the distribution are files to support building using
       CMake instead of configure.  The  text  file  README  contains  general
       information  about  building  with Autotools (some of which is repeated
       below), and also has some comments about building on various  operating
       systems.  There  is a lot more information about building PCRE2 without
       using Autotools (including information about using CMake  and  building
       "by  hand")  in  the  text file called NON-AUTOTOOLS-BUILD.  You should
       consult this file as well as the README file if you are building  in  a
       non-Unix-like environment.


PCRE2 BUILD-TIME OPTIONS

       The rest of this document describes the optional features of PCRE2 that
       can be selected when the library is compiled. It  assumes  use  of  the
       configure  script,  where  the  optional features are selected or dese-
       lected by providing options to configure before running the  make  com-
       mand.  However,  the same options can be selected in both Unix-like and
       non-Unix-like environments if you are using CMake instead of  configure
       to build PCRE2.

       If  you  are not using Autotools or CMake, option selection can be done
       by editing the config.h file, or by passing parameter settings  to  the
       compiler, as described in NON-AUTOTOOLS-BUILD.

       The complete list of options for configure (which includes the standard
       ones such as the  selection  of  the  installation  directory)  can  be
       obtained by running

         ./configure --help

       The  following  sections include descriptions of "on/off" options whose
       names begin with --enable or --disable. Because of the way that config-
       ure  works, --enable and --disable always come in pairs, so the comple-
       mentary option always exists as well, but as it specifies the  default,
       it is not described.  Options that specify values have names that start
       with --with.


BUILDING 8-BIT, 16-BIT AND 32-BIT LIBRARIES

       By default, a library called libpcre2-8 is built, containing  functions
       that  take  string  arguments contained in arrays of bytes, interpreted
       either as single-byte characters, or UTF-8 strings. You can also  build
       two  other libraries, called libpcre2-16 and libpcre2-32, which process
       strings that are contained in arrays of 16-bit and 32-bit  code  units,
       respectively. These can be interpreted either as single-unit characters
       or UTF-16/UTF-32 strings. To build these additional libraries, add  one
       or both of the following to the configure command:

         --enable-pcre2-16
         --enable-pcre2-32

       If you do not want the 8-bit library, add

         --disable-pcre2-8

       as  well.  At least one of the three libraries must be built. Note that
       the POSIX wrapper is for the 8-bit library only, and that pcre2grep  is
       an  8-bit  program.  Neither  of these are built if you select only the
       16-bit or 32-bit libraries.


BUILDING SHARED AND STATIC LIBRARIES

       The Autotools PCRE2 building process uses libtool to build both  shared
       and  static  libraries by default. You can suppress an unwanted library
       by adding one of

         --disable-shared
         --disable-static

       to the configure command.


UNICODE AND UTF SUPPORT

       By default, PCRE2 is built with support for Unicode and  UTF  character
       strings.  To build it without Unicode support, add

         --disable-unicode

       to  the configure command. This setting applies to all three libraries.
       It is not possible to build  one  library  with  Unicode  support,  and
       another without, in the same configuration.

       Of  itself, Unicode support does not make PCRE2 treat strings as UTF-8,
       UTF-16 or UTF-32. To do that, applications that use the library can set
       the  PCRE2_UTF  option when they call pcre2_compile() to compile a pat-
       tern.  Alternatively, patterns may be started with  (*UTF)  unless  the
       application has locked this out by setting PCRE2_NEVER_UTF.

       UTF support allows the libraries to process character code points up to
       0x10ffff in the strings that they handle. Unicode  support  also  gives
       access  to  the Unicode properties of characters, using pattern escapes
       such as \P, \p, and \X. Only the general category properties such as Lu
       and  Nd are supported. Details are given in the pcre2pattern documenta-
       tion.

       Pattern escapes such as \d and \w do not by default make use of Unicode
       properties.  The  application  can  request that they do by setting the
       PCRE2_UCP option. Unless the application  has  set  PCRE2_NEVER_UCP,  a
       pattern may also request this by starting with (*UCP).


DISABLING THE USE OF \C

       The \C escape sequence, which matches a single code unit, even in a UTF
       mode, can cause unpredictable behaviour because it may leave  the  cur-
       rent  matching  point in the middle of a multi-code-unit character. The
       application can lock it  out  by  setting  the  PCRE2_NEVER_BACKSLASH_C
       option when calling pcre2_compile(). There is also a build-time option

         --enable-never-backslash-C

       (note the upper case C) which locks out the use of \C entirely.


JUST-IN-TIME COMPILER SUPPORT

       Just-in-time  (JIT) compiler support is included in the build by speci-
       fying

         --enable-jit

       This support is available only for certain hardware  architectures.  If
       this  option  is  set for an unsupported architecture, a building error
       occurs. If you are running under SELinux you may also want to add

         --enable-jit-sealloc

       which enables the use of an execmem allocator in JIT that is compatible
       with  SELinux.  This  has  no  effect  if  JIT  is not enabled. See the
       pcre2jit documentation for a discussion of JIT usage. When JIT  support
       is enabled, pcre2grep automatically makes use of it, unless you add

         --disable-pcre2grep-jit

       to the "configure" command.


NEWLINE RECOGNITION

       By  default, PCRE2 interprets the linefeed (LF) character as indicating
       the end of a line. This is the normal newline  character  on  Unix-like
       systems.  You can compile PCRE2 to use carriage return (CR) instead, by
       adding

         --enable-newline-is-cr

       to the configure  command.  There  is  also  an  --enable-newline-is-lf
       option, which explicitly specifies linefeed as the newline character.

       Alternatively, you can specify that line endings are to be indicated by
       the two-character sequence CRLF (CR immediately followed by LF). If you
       want this, add

         --enable-newline-is-crlf

       to the configure command. There is a fourth option, specified by

         --enable-newline-is-anycrlf

       which  causes  PCRE2 to recognize any of the three sequences CR, LF, or
       CRLF as indicating a line ending. A fifth option, specified by

         --enable-newline-is-any

       causes PCRE2 to recognize any Unicode  newline  sequence.  The  Unicode
       newline sequences are the three just mentioned, plus the single charac-
       ters VT (vertical tab, U+000B), FF (form feed, U+000C), NEL (next line,
       U+0085),  LS  (line  separator,  U+2028),  and PS (paragraph separator,
       U+2029). The final option is

         --enable-newline-is-nul

       which causes NUL (binary zero) is set as the default line-ending  char-
       acter.

       Whatever default line ending convention is selected when PCRE2 is built
       can be overridden by applications that use the library. At  build  time
       it is recommended to use the standard for your operating system.


WHAT \R MATCHES

       By  default,  the  sequence \R in a pattern matches any Unicode newline
       sequence, independently of what has been selected as  the  line  ending
       sequence. If you specify

         --enable-bsr-anycrlf

       the  default  is changed so that \R matches only CR, LF, or CRLF. What-
       ever is selected when PCRE2 is built can be overridden by  applications
       that use the library.


HANDLING VERY LARGE PATTERNS

       Within  a  compiled  pattern,  offset values are used to point from one
       part to another (for example, from an opening parenthesis to an  alter-
       nation  metacharacter).  By default, in the 8-bit and 16-bit libraries,
       two-byte values are used for these offsets, leading to a  maximum  size
       for  a compiled pattern of around 64K code units. This is sufficient to
       handle all but the most gigantic patterns. Nevertheless, some people do
       want  to  process truly enormous patterns, so it is possible to compile
       PCRE2 to use three-byte or four-byte offsets by adding a  setting  such
       as

         --with-link-size=3

       to  the  configure command. The value given must be 2, 3, or 4. For the
       16-bit library, a value of 3 is rounded up to 4.  In  these  libraries,
       using  longer  offsets slows down the operation of PCRE2 because it has
       to load additional data when handling them. For the 32-bit library  the
       value  is  always 4 and cannot be overridden; the value of --with-link-
       size is ignored.


LIMITING PCRE2 RESOURCE USAGE

       The pcre2_match() function increments a counter each time it goes round
       its  main  loop. Putting a limit on this counter controls the amount of
       computing resource used by a single call to  pcre2_match().  The  limit
       can be changed at run time, as described in the pcre2api documentation.
       The default is 10 million, but this can be changed by adding a  setting
       such as

         --with-match-limit=500000

       to   the   configure   command.   This  setting  also  applies  to  the
       pcre2_dfa_match() matching function, and to JIT  matching  (though  the
       counting is done differently).

       The  pcre2_match() function starts out using a 20K vector on the system
       stack to record  backtracking  points.  The  more  nested  backtracking
       points there are (that is, the deeper the search tree), the more memory
       is needed. If the initial vector is not large enough,  heap  memory  is
       used, up to a certain limit, which is specified in kilobytes. The limit
       can be changed at run time, as described in the pcre2api documentation.
       The  default  limit (in effect unlimited) is 20 million. You can change
       this by a setting such as

         --with-heap-limit=500

       which limits the amount of heap to 500 kilobytes.  This  limit  applies
       only  to interpretive matching in pcre2_match(). It does not apply when
       JIT (which has its own memory arrangements) is used, nor does it  apply
       to pcre2_dfa_match().

       You  can  also explicitly limit the depth of nested backtracking in the
       pcre2_match() interpreter. This limit defaults to the value that is set
       for  --with-match-limit.  You  can set a lower default limit by adding,
       for example,

         --with-match-limit_depth=10000

       to the configure command. This value can be  overridden  at  run  time.
       This  depth  limit  indirectly limits the amount of heap memory that is
       used, but because the size of each backtracking "frame" depends on  the
       number  of  capturing parentheses in a pattern, the amount of heap that
       is used before the limit is reached varies  from  pattern  to  pattern.
       This  limit  was  more  useful in versions before 10.30, where function
       recursion was used for backtracking.

       As well as applying to pcre2_match(), the depth limit also controls the
       depth  of recursive function calls in pcre2_dfa_match(). These are used
       for lookaround assertions, atomic groups,  and  recursion  within  pat-
       terns.  The limit does not apply to JIT matching.


CREATING CHARACTER TABLES AT BUILD TIME

       PCRE2 uses fixed tables for processing characters whose code points are
       less than 256. By default, PCRE2 is built with a set of tables that are
       distributed  in  the file src/pcre2_chartables.c.dist. These tables are
       for ASCII codes only. If you add

         --enable-rebuild-chartables

       to the configure command, the distributed tables are  no  longer  used.
       Instead,  a  program  called dftables is compiled and run. This outputs
       the source for new set of tables, created in the default locale of your
       C run-time system. This method of replacing the tables does not work if
       you are cross compiling, because dftables is run on the local host.  If
       you  need  to  create alternative tables when cross compiling, you will
       have to do so "by hand".


USING EBCDIC CODE

       PCRE2 assumes by default that it will run in an environment  where  the
       character  code is ASCII or Unicode, which is a superset of ASCII. This
       is the case for most computer operating systems. PCRE2 can, however, be
       compiled to run in an 8-bit EBCDIC environment by adding

         --enable-ebcdic --disable-unicode

       to the configure command. This setting implies --enable-rebuild-charta-
       bles. You should only use it if you know that  you  are  in  an  EBCDIC
       environment (for example, an IBM mainframe operating system).

       It  is  not possible to support both EBCDIC and UTF-8 codes in the same
       version of the library. Consequently,  --enable-unicode  and  --enable-
       ebcdic are mutually exclusive.

       The EBCDIC character that corresponds to an ASCII LF is assumed to have
       the value 0x15 by default. However, in some EBCDIC  environments,  0x25
       is used. In such an environment you should use

         --enable-ebcdic-nl25

       as well as, or instead of, --enable-ebcdic. The EBCDIC character for CR
       has the same value as in ASCII, namely, 0x0d.  Whichever  of  0x15  and
       0x25 is not chosen as LF is made to correspond to the Unicode NEL char-
       acter (which, in Unicode, is 0x85).

       The options that select newline behaviour, such as --enable-newline-is-
       cr, and equivalent run-time options, refer to these character values in
       an EBCDIC environment.


PCRE2GREP SUPPORT FOR EXTERNAL SCRIPTS

       By default, on non-Windows systems, pcre2grep supports the use of call-
       outs with string arguments within the patterns it is matching, in order
       to run external scripts. For details, see the pcre2grep  documentation.
       This  support  can be disabled by adding --disable-pcre2grep-callout to
       the configure command.


PCRE2GREP OPTIONS FOR COMPRESSED FILE SUPPORT

       By default, pcre2grep reads all files as plain text. You can  build  it
       so  that  it recognizes files whose names end in .gz or .bz2, and reads
       them with libz or libbz2, respectively, by adding one or both of

         --enable-pcre2grep-libz
         --enable-pcre2grep-libbz2

       to the configure command. These options naturally require that the rel-
       evant  libraries  are installed on your system. Configuration will fail
       if they are not.


PCRE2GREP BUFFER SIZE

       pcre2grep uses an internal buffer to hold a "window" on the file it  is
       scanning, in order to be able to output "before" and "after" lines when
       it finds a match. The starting size of the buffer is  controlled  by  a
       parameter  whose default value is 20K. The buffer itself is three times
       this size, but because of the way  it  is  used  for  holding  "before"
       lines,  the  longest  line  that is guaranteed to be processable is the
       parameter size. If a longer line is  encountered,  pcre2grep  automati-
       cally expands the buffer, up to a specified maximum size, whose default
       is 1M or the starting size, whichever is the larger. You can change the
       default parameter values by adding, for example,

         --with-pcre2grep-bufsize=51200
         --with-pcre2grep-max-bufsize=2097152

       to  the  configure  command. The caller of pcre2grep can override these
       values by using --buffer-size  and  --max-buffer-size  on  the  command
       line.


PCRE2TEST OPTION FOR LIBREADLINE SUPPORT

       If you add one of

         --enable-pcre2test-libreadline
         --enable-pcre2test-libedit

       to  the  configure  command,  pcre2test  is linked with the libreadline
       orlibedit library, respectively, and when its input is from a terminal,
       it  reads  it using the readline() function. This provides line-editing
       and history facilities. Note that libreadline is  GPL-licensed,  so  if
       you  distribute  a binary of pcre2test linked in this way, there may be
       licensing issues. These can be avoided by linking instead with libedit,
       which has a BSD licence.

       Setting  --enable-pcre2test-libreadline causes the -lreadline option to
       be added to the pcre2test build. In many operating environments with  a
       sytem-installed  readline  library this is sufficient. However, in some
       environments (e.g. if an unmodified distribution version of readline is
       in  use),  some  extra configuration may be necessary. The INSTALL file
       for libreadline says this:

         "Readline uses the termcap functions, but does not link with
         the termcap or curses library itself, allowing applications
         which link with readline the to choose an appropriate library."

       If your environment has not been set up so that an appropriate  library
       is automatically included, you may need to add something like

         LIBS="-ncurses"

       immediately before the configure command.


INCLUDING DEBUGGING CODE

       If you add

         --enable-debug

       to  the configure command, additional debugging code is included in the
       build. This feature is intended for use by the PCRE2 maintainers.


DEBUGGING WITH VALGRIND SUPPORT

       If you add

         --enable-valgrind

       to the configure command, PCRE2 will use valgrind annotations  to  mark
       certain  memory  regions  as  unaddressable.  This  allows it to detect
       invalid memory accesses, and  is  mostly  useful  for  debugging  PCRE2
       itself.


CODE COVERAGE REPORTING

       If  your  C  compiler is gcc, you can build a version of PCRE2 that can
       generate a code coverage report for its test suite. To enable this, you
       must install lcov version 1.6 or above. Then specify

         --enable-coverage

       to the configure command and build PCRE2 in the usual way.

       Note that using ccache (a caching C compiler) is incompatible with code
       coverage reporting. If you have configured ccache to run  automatically
       on your system, you must set the environment variable

         CCACHE_DISABLE=1

       before running make to build PCRE2, so that ccache is not used.

       When  --enable-coverage  is  used,  the  following addition targets are
       added to the Makefile:

         make coverage

       This creates a fresh coverage report for the PCRE2 test  suite.  It  is
       equivalent  to running "make coverage-reset", "make coverage-baseline",
       "make check", and then "make coverage-report".

         make coverage-reset

       This zeroes the coverage counters, but does nothing else.

         make coverage-baseline

       This captures baseline coverage information.

         make coverage-report

       This creates the coverage report.

         make coverage-clean-report

       This removes the generated coverage report without cleaning the  cover-
       age data itself.

         make coverage-clean-data

       This  removes  the captured coverage data without removing the coverage
       files created at compile time (*.gcno).

         make coverage-clean

       This cleans all coverage data including the generated coverage  report.
       For  more  information about code coverage, see the gcov and lcov docu-
       mentation.


SUPPORT FOR FUZZERS

       There is a special option for use by people who  want  to  run  fuzzing
       tests on PCRE2:

         --enable-fuzz-support

       At present this applies only to the 8-bit library. If set, it causes an
       extra library  called  libpcre2-fuzzsupport.a  to  be  built,  but  not
       installed.  This contains a single function called LLVMFuzzerTestOneIn-
       put() whose arguments are a pointer to a string and the length  of  the
       string.  When  called,  this  function tries to compile the string as a
       pattern, and if that succeeds, to match it.  This is done both with  no
       options  and  with some random options bits that are generated from the
       string.

       Setting --enable-fuzz-support also causes  a  binary  called  pcre2fuz-
       zcheck  to be created. This is normally run under valgrind or used when
       PCRE2 is compiled with address sanitizing enabled. It calls the fuzzing
       function  and  outputs information about it is doing. The input strings
       are specified by arguments: if an argument starts with "=" the rest  of
       it  is  a  literal  input string. Otherwise, it is assumed to be a file
       name, and the contents of the file are the test string.


OBSOLETE OPTION

       In versions of PCRE2 prior to 10.30, there were two  ways  of  handling
       backtracking  in the pcre2_match() function. The default was to use the
       system stack, but if

         --disable-stack-for-recursion

       was set, memory on the heap was used. From release 10.30  onwards  this
       has  changed  (the  stack  is  no longer used) and this option now does
       nothing except give a warning.


SEE ALSO

       pcre2api(3), pcre2-config(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 18 July 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2CALLOUT(3)            Library Functions Manual            PCRE2CALLOUT(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

SYNOPSIS

       #include <pcre2.h>

       int (*pcre2_callout)(pcre2_callout_block *, void *);

       int pcre2_callout_enumerate(const pcre2_code *code,
         int (*callback)(pcre2_callout_enumerate_block *, void *),
         void *user_data);


DESCRIPTION

       PCRE2  provides  a feature called "callout", which is a means of tempo-
       rarily passing control to the caller of PCRE2 in the middle of  pattern
       matching.  The caller of PCRE2 provides an external function by putting
       its entry point in a match  context  (see  pcre2_set_callout()  in  the
       pcre2api documentation).

       Within  a  regular expression, (?C<arg>) indicates a point at which the
       external function is to be called.  Different  callout  points  can  be
       identified  by  putting  a number less than 256 after the letter C. The
       default value is zero.  Alternatively, the argument may be a  delimited
       string.  The  starting delimiter must be one of ` ' " ^ % # $ { and the
       ending delimiter is the same as the start, except for {, where the end-
       ing  delimiter  is  }.  If  the  ending  delimiter is needed within the
       string, it must be doubled. For example, this pattern has  two  callout
       points:

         (?C1)abc(?C"some ""arbitrary"" text")def

       If the PCRE2_AUTO_CALLOUT option bit is set when a pattern is compiled,
       PCRE2 automatically inserts callouts, all with number 255, before  each
       item  in the pattern except for immediately before or after an explicit
       callout. For example, if PCRE2_AUTO_CALLOUT is used with the pattern

         A(?C3)B

       it is processed as if it were

         (?C255)A(?C3)B(?C255)

       Here is a more complicated example:

         A(\d{2}|--)

       With PCRE2_AUTO_CALLOUT, this pattern is processed as if it were

         (?C255)A(?C255)((?C255)\d{2}(?C255)|(?C255)-(?C255)-(?C255))(?C255)

       Notice that there is a callout before and after  each  parenthesis  and
       alternation bar. If the pattern contains a conditional group whose con-
       dition is an assertion, an automatic callout  is  inserted  immediately
       before  the  condition. Such a callout may also be inserted explicitly,
       for example:

         (?(?C9)(?=a)ab|de)  (?(?C%text%)(?!=d)ab|de)

       This applies only to assertion conditions (because they are  themselves
       independent groups).

       Callouts  can  be useful for tracking the progress of pattern matching.
       The pcre2test program has a pattern qualifier (/auto_callout) that sets
       automatic  callouts.   When  any  callouts are present, the output from
       pcre2test indicates how the pattern is being matched.  This  is  useful
       information  when  you are trying to optimize the performance of a par-
       ticular pattern.


MISSING CALLOUTS

       You should be aware that, because of optimizations  in  the  way  PCRE2
       compiles and matches patterns, callouts sometimes do not happen exactly
       as you might expect.

   Auto-possessification

       At compile time, PCRE2 "auto-possessifies" repeated items when it knows
       that  what follows cannot be part of the repeat. For example, a+[bc] is
       compiled as if it were a++[bc]. The pcre2test output when this  pattern
       is compiled with PCRE2_ANCHORED and PCRE2_AUTO_CALLOUT and then applied
       to the string "aaaa" is:

         --->aaaa
          +0 ^        a+
          +2 ^   ^    [bc]
         No match

       This indicates that when matching [bc] fails, there is no  backtracking
       into a+ (because it is being treated as a++) and therefore the callouts
       that would be taken for the backtracks do not occur.  You  can  disable
       the   auto-possessify   feature  by  passing  PCRE2_NO_AUTO_POSSESS  to
       pcre2_compile(), or starting the pattern  with  (*NO_AUTO_POSSESS).  In
       this case, the output changes to this:

         --->aaaa
          +0 ^        a+
          +2 ^   ^    [bc]
          +2 ^  ^     [bc]
          +2 ^ ^      [bc]
          +2 ^^       [bc]
         No match

       This time, when matching [bc] fails, the matcher backtracks into a+ and
       tries again, repeatedly, until a+ itself fails.

   Automatic .* anchoring

       By default, an optimization is applied when .* is the first significant
       item  in  a  pattern. If PCRE2_DOTALL is set, so that the dot can match
       any character, the pattern is automatically anchored.  If  PCRE2_DOTALL
       is  not set, a match can start only after an internal newline or at the
       beginning of the subject, and pcre2_compile() remembers this. If a pat-
       tern  has more than one top-level branch, automatic anchoring occurs if
       all branches are anchorable.

       This optimization is disabled, however, if .* is in an atomic group  or
       if  there  is  a  back  reference  to  the  capturing group in which it
       appears. It is also  disabled  if  the  pattern  contains  (*PRUNE)  or
       (*SKIP). However, the presence of callouts does not affect it.

       For  example,  if  the pattern .*\d is compiled with PCRE2_AUTO_CALLOUT
       and applied to the string "aa", the pcre2test output is:

         --->aa
          +0 ^      .*
          +2 ^ ^    \d
          +2 ^^     \d
          +2 ^      \d
         No match

       This shows that all match attempts start at the beginning of  the  sub-
       ject.  In  other  words,  the pattern is anchored. You can disable this
       optimization by passing PCRE2_NO_DOTSTAR_ANCHOR to pcre2_compile(),  or
       starting  the pattern with (*NO_DOTSTAR_ANCHOR). In this case, the out-
       put changes to:

         --->aa
          +0 ^      .*
          +2 ^ ^    \d
          +2 ^^     \d
          +2 ^      \d
          +0  ^     .*
          +2  ^^    \d
          +2  ^     \d
         No match

       This shows more match attempts, starting at the second subject  charac-
       ter.   Another  optimization, described in the next section, means that
       there is no subsequent attempt to match with an empty subject.

   Other optimizations

       Other optimizations that provide fast "no match"  results  also  affect
       callouts.  For example, if the pattern is

         ab(?C4)cd

       PCRE2  knows  that  any matching string must contain the letter "d". If
       the subject string is "abyz", the  lack  of  "d"  means  that  matching
       doesn't  ever  start,  and  the callout is never reached. However, with
       "abyd", though the result is still no match, the callout is obeyed.

       For most patterns PCRE2 also knows the minimum  length  of  a  matching
       string,  and will immediately give a "no match" return without actually
       running a match if the subject is not long enough, or,  for  unanchored
       patterns, if it has been scanned far enough.

       You can disable these optimizations by passing the PCRE2_NO_START_OPTI-
       MIZE option  to  pcre2_compile(),  or  by  starting  the  pattern  with
       (*NO_START_OPT).  This slows down the matching process, but does ensure
       that callouts such as the example above are obeyed.


THE CALLOUT INTERFACE

       During matching, when PCRE2 reaches a callout  point,  if  an  external
       function  is  provided in the match context, it is called. This applies
       to both normal and DFA matching. The  first  argument  to  the  callout
       function  is a pointer to a pcre2_callout block. The second argument is
       the void * callout data that was supplied when the callout was  set  up
       by  calling  pcre2_set_callout()  (see the pcre2api documentation). The
       callout block structure contains the following fields:

         uint32_t      version;
         uint32_t      callout_number;
         uint32_t      capture_top;
         uint32_t      capture_last;
         PCRE2_SIZE   *offset_vector;
         PCRE2_SPTR    mark;
         PCRE2_SPTR    subject;
         PCRE2_SIZE    subject_length;
         PCRE2_SIZE    start_match;
         PCRE2_SIZE    current_position;
         PCRE2_SIZE    pattern_position;
         PCRE2_SIZE    next_item_length;
         PCRE2_SIZE    callout_string_offset;
         PCRE2_SIZE    callout_string_length;
         PCRE2_SPTR    callout_string;

       The version field contains the version number of the block format.  The
       current  version  is  1; the three callout string fields were added for
       this version. If you are writing an application that might use an  ear-
       lier  release  of  PCRE2,  you  should  check the version number before
       accessing any of these fields. The  version  number  will  increase  in
       future  if  more fields are added, but the intention is never to remove
       any of the existing fields.

   Fields for numerical callouts

       For a numerical callout, callout_string  is  NULL,  and  callout_number
       contains  the  number  of  the callout, in the range 0-255. This is the
       number that follows (?C for callouts that part of the  pattern;  it  is
       255 for automatically generated callouts.

   Fields for string callouts

       For  callouts with string arguments, callout_number is always zero, and
       callout_string points to the string that is contained within  the  com-
       piled pattern. Its length is given by callout_string_length. Duplicated
       ending delimiters that were present in the original pattern string have
       been turned into single characters, but there is no other processing of
       the callout string argument. An additional code unit containing  binary
       zero  is  present  after the string, but is not included in the length.
       The delimiter that was used to start the string is also  stored  within
       the  pattern, immediately before the string itself. You can access this
       delimiter as callout_string[-1] if you need it.

       The callout_string_offset field is the code unit offset to the start of
       the callout argument string within the original pattern string. This is
       provided for the benefit of applications such as script languages  that
       might need to report errors in the callout string within the pattern.

   Fields for all callouts

       The  remaining  fields in the callout block are the same for both kinds
       of callout.

       The offset_vector field is a pointer to a vector of  capturing  offsets
       (the "ovector"). You may read the elements in this vector, but you must
       not change any of them.

       For calls to pcre2_match(),  the  offset_vector  field  is  not  (since
       release  10.30)  a pointer to the actual ovector that was passed to the
       matching function in the match data block.  Instead  it  points  to  an
       internal  ovector  of a size large enough to hold all possible captured
       substrings in the pattern. Note that whenever a recursion or subroutine
       call  within  a pattern completes, the capturing state is reset to what
       it was before.

       The capture_last field contains the number of the  most  recently  cap-
       tured  substring,  and the capture_top field contains one more than the
       number of the highest numbered captured substring so far.  If  no  sub-
       strings  have yet been captured, the value of capture_last is 0 and the
       value of capture_top is 1. The values of these  fields  do  not  always
       differ   by   one;  for  example,  when  the  callout  in  the  pattern
       ((a)(b))(?C2) is taken, capture_last is 1 but capture_top is 4.

       The  contents  of  ovector[2]  to  ovector[<capture_top>*2-1]  can   be
       inspected in order to extract substrings that have been matched so far,
       in the same way as extracting substrings after a match  has  completed.
       The  values in ovector[0] and ovector[1] are always PCRE2_UNSET because
       the match is by definition not complete. Substrings that have not  been
       captured  but whose numbers are less than capture_top also have both of
       their ovector slots set to PCRE2_UNSET.

       For DFA matching, the offset_vector field points to  the  ovector  that
       was  passed  to  the  matching function in the match data block, but it
       holds no useful information at callout time  because  pcre2_dfa_match()
       does  not  support  substring  capturing.  The  value of capture_top is
       always 1 and the value of capture_last is always 0 for DFA matching.

       The subject and subject_length fields contain copies of the values that
       were passed to the matching function.

       The  start_match  field normally contains the offset within the subject
       at which the current match attempt  started.  However,  if  the  escape
       sequence  \K has been encountered, this value is changed to reflect the
       modified starting point. If the pattern is not  anchored,  the  callout
       function may be called several times from the same point in the pattern
       for different starting points in the subject.

       The current_position field contains the offset within  the  subject  of
       the current match pointer.

       The pattern_position field contains the offset in the pattern string to
       the next item to be matched.

       The next_item_length field contains the length of the next item  to  be
       processed  in the pattern string. When the callout is at the end of the
       pattern, the length is zero.  When  the  callout  precedes  an  opening
       parenthesis, the length includes meta characters that follow the paren-
       thesis. For example, in a callout before an assertion  such  as  (?=ab)
       the  length  is  3. For an an alternation bar or a closing parenthesis,
       the length is one, unless a closing parenthesis is followed by a  quan-
       tifier, in which case its length is included.  (This changed in release
       10.23. In earlier releases, before an opening  parenthesis  the  length
       was  that  of the entire subpattern, and before an alternation bar or a
       closing parenthesis the length was zero.)

       The pattern_position and next_item_length fields are intended  to  help
       in  distinguishing between different automatic callouts, which all have
       the same callout number. However, they are set for  all  callouts,  and
       are used by pcre2test to show the next item to be matched when display-
       ing callout information.

       In callouts from pcre2_match() the mark field contains a pointer to the
       zero-terminated  name of the most recently passed (*MARK), (*PRUNE), or
       (*THEN) item in the match, or NULL if no such items have  been  passed.
       Instances  of  (*PRUNE)  or  (*THEN) without a name do not obliterate a
       previous (*MARK). In callouts from the DFA matching function this field
       always contains NULL.


RETURN VALUES FROM CALLOUTS

       The external callout function returns an integer to PCRE2. If the value
       is zero, matching proceeds as normal. If  the  value  is  greater  than
       zero,  matching  fails  at  the current point, but the testing of other
       matching possibilities goes ahead, just as if a lookahead assertion had
       failed. If the value is less than zero, the match is abandoned, and the
       matching function returns the negative value.

       Negative  values  should  normally  be   chosen   from   the   set   of
       PCRE2_ERROR_xxx  values.  In  particular,  PCRE2_ERROR_NOMATCH forces a
       standard "no match" failure. The error  number  PCRE2_ERROR_CALLOUT  is
       reserved  for  use by callout functions; it will never be used by PCRE2
       itself.


CALLOUT ENUMERATION

       int pcre2_callout_enumerate(const pcre2_code *code,
         int (*callback)(pcre2_callout_enumerate_block *, void *),
         void *user_data);

       A script language that supports the use of string arguments in callouts
       might  like  to  scan  all the callouts in a pattern before running the
       match. This can be done by calling pcre2_callout_enumerate(). The first
       argument  is  a  pointer  to a compiled pattern, the second points to a
       callback function, and the third is arbitrary user data.  The  callback
       function  is  called  for  every callout in the pattern in the order in
       which they appear. Its first argument is a pointer to a callout enumer-
       ation  block,  and  its second argument is the user_data value that was
       passed to pcre2_callout_enumerate(). The data block contains  the  fol-
       lowing fields:

         version                Block version number
         pattern_position       Offset to next item in pattern
         next_item_length       Length of next item in pattern
         callout_number         Number for numbered callouts
         callout_string_offset  Offset to string within pattern
         callout_string_length  Length of callout string
         callout_string         Points to callout string or is NULL

       The  version  number is currently 0. It will increase if new fields are
       ever added to the block. The remaining fields are  the  same  as  their
       namesakes  in  the pcre2_callout block that is used for callouts during
       matching, as described above.

       Note that the value of pattern_position is  unique  for  each  callout.
       However,  if  a callout occurs inside a group that is quantified with a
       non-zero minimum or a fixed maximum, the group is replicated inside the
       compiled  pattern.  For example, a pattern such as /(a){2}/ is compiled
       as if it were /(a)(a)/. This means that the callout will be  enumerated
       more  than  once,  but with the same value for pattern_position in each
       case.

       The callback function should normally return zero. If it returns a non-
       zero value, scanning the pattern stops, and that value is returned from
       pcre2_callout_enumerate().


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 14 April 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2COMPAT(3)             Library Functions Manual             PCRE2COMPAT(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

DIFFERENCES BETWEEN PCRE2 AND PERL

       This document describes the differences in the ways that PCRE2 and Perl
       handle regular expressions. The differences  described  here  are  with
       respect  to Perl versions 5.26, but as both Perl and PCRE2 are continu-
       ally changing, the information may sometimes be out of date.

       1. PCRE2 has only a subset of Perl's Unicode support. Details  of  what
       it does have are given in the pcre2unicode page.

       2.  Like  Perl, PCRE2 allows repeat quantifiers on parenthesized asser-
       tions, but they do not mean what you might think. For example, (?!a){3}
       does  not  assert  that  the next three characters are not "a". It just
       asserts that the next character is not "a" three times  (in  principle:
       PCRE2  optimizes this to run the assertion just once). Perl allows some
       repeat quantifiers on other  assertions,  for  example,  \b*  (but  not
       \b{3}), but these do not seem to have any use.

       3.  Capturing  subpatterns that occur inside negative lookaround asser-
       tions are counted, but their entries in the offsets vector are set only
       when  a  negative  assertion  is a condition that has a matching branch
       (that is, the condition is false).

       4. The following Perl escape sequences are not supported: \l,  \u,  \L,
       \U,  and  \N when followed by a character name or Unicode value. (\N on
       its own, matching a non-newline character, is supported.) In fact these
       are  implemented  by Perl's general string-handling and are not part of
       its pattern matching engine. If any of these are encountered by  PCRE2,
       an error is generated by default. However, if the PCRE2_ALT_BSUX option
       is set, \U and \u are interpreted as ECMAScript interprets them.

       5. The Perl escape sequences \p, \P, and \X are supported only if PCRE2
       is built with Unicode support (the default). The properties that can be
       tested with \p and \P are limited to the  general  category  properties
       such  as  Lu and Nd, script names such as Greek or Han, and the derived
       properties Any and L&.  PCRE2 does support the Cs (surrogate) property,
       which  Perl  does  not; the Perl documentation says "Because Perl hides
       the need for the user to understand the internal representation of Uni-
       code  characters, there is no need to implement the somewhat messy con-
       cept of surrogates."

       6. PCRE2 does support the \Q...\E escape for quoting substrings.  Char-
       acters  in  between are treated as literals. This is slightly different
       from Perl in that $ and @ are  also  handled  as  literals  inside  the
       quotes. In Perl, they cause variable interpolation (but of course PCRE2
       does not have variables).  Note the following examples:

           Pattern            PCRE2 matches      Perl matches

           \Qabc$xyz\E        abc$xyz           abc followed by the
                                                  contents of $xyz
           \Qabc\$xyz\E       abc\$xyz          abc\$xyz
           \Qabc\E\$\Qxyz\E   abc$xyz           abc$xyz

       The \Q...\E sequence is recognized both inside  and  outside  character
       classes.

       7.   Fairly  obviously,  PCRE2  does  not  support  the  (?{code})  and
       (??{code}) constructions. However, there is support  PCRE2's  "callout"
       feature,  which allows an external function to be called during pattern
       matching. See the pcre2callout documentation for details.

       8. Subroutine calls (whether recursive or not) were treated  as  atomic
       groups  up to PCRE2 release 10.23, but from release 10.30 this changed,
       and backtracking into subroutine calls is now supported, as in Perl.

       9. If any of the backtracking control verbs are used  in  a  subpattern
       that  is  called  as  a  subroutine (whether or not recursively), their
       effect is confined to that subpattern; it does not extend to  the  sur-
       rounding  pattern.  This is not always the case in Perl. In particular,
       if (*THEN) is present in a group that is called as  a  subroutine,  its
       action is limited to that group, even if the group does not contain any
       | characters. Note that such subpatterns are processed as  anchored  at
       the point where they are tested.

       10.  If a pattern contains more than one backtracking control verb, the
       first one that is backtracked onto acts. For example,  in  the  pattern
       A(*COMMIT)B(*PRUNE)C  a  failure in B triggers (*COMMIT), but a failure
       in C triggers (*PRUNE). Perl's behaviour is more complex; in many cases
       it is the same as PCRE2, but there are cases where it differs.

       11.  Most  backtracking  verbs in assertions have their normal actions.
       They are not confined to the assertion.

       12. There are some differences that are concerned with the settings  of
       captured  strings  when  part  of  a  pattern is repeated. For example,
       matching "aba" against the  pattern  /^(a(b)?)+$/  in  Perl  leaves  $2
       unset, but in PCRE2 it is set to "b".

       13. PCRE2's handling of duplicate subpattern numbers and duplicate sub-
       pattern names is not as general as Perl's. This is a consequence of the
       fact  the  PCRE2  works internally just with numbers, using an external
       table to translate between numbers and names. In particular, a  pattern
       such  as  (?|(?<a>A)|(?<b>B),  where the two capturing parentheses have
       the same number but different names, is not supported,  and  causes  an
       error  at compile time. If it were allowed, it would not be possible to
       distinguish which parentheses matched, because both names map  to  cap-
       turing subpattern number 1. To avoid this confusing situation, an error
       is given at compile time.

       14. Perl used to recognize comments in some places that PCRE2 does not,
       for  example,  between the ( and ? at the start of a subpattern. If the
       /x modifier is set, Perl allowed white space between ( and ? though the
       latest  Perls give an error (for a while it was just deprecated). There
       may still be some cases where Perl behaves differently.

       15. Perl, when in warning mode, gives warnings  for  character  classes
       such  as  [A-\d] or [a-[:digit:]]. It then treats the hyphens as liter-
       als. PCRE2 has no warning features, so it gives an error in these cases
       because they are almost certainly user mistakes.

       16.  In  PCRE2, the upper/lower case character properties Lu and Ll are
       not affected when case-independent matching is specified. For  example,
       \p{Lu} always matches an upper case letter. I think Perl has changed in
       this respect; in the release at the time of writing (5.24), \p{Lu}  and
       \p{Ll} match all letters, regardless of case, when case independence is
       specified.

       17. PCRE2 provides some  extensions  to  the  Perl  regular  expression
       facilities.   Perl  5.10  includes new features that are not in earlier
       versions of Perl, some of which (such as  named  parentheses)  were  in
       PCRE2 for some time before. This list is with respect to Perl 5.26:

       (a)  Although  lookbehind  assertions  in PCRE2 must match fixed length
       strings, each alternative branch of a lookbehind assertion can match  a
       different  length  of  string.  Perl requires them all to have the same
       length.

       (b) From PCRE2 10.23, back references to groups  of  fixed  length  are
       supported in lookbehinds, provided that there is no possibility of ref-
       erencing a non-unique number or name. Perl does not support  backrefer-
       ences in lookbehinds.

       (c)  If PCRE2_DOLLAR_ENDONLY is set and PCRE2_MULTILINE is not set, the
       $ meta-character matches only at the very end of the string.

       (d) A backslash followed  by  a  letter  with  no  special  meaning  is
       faulted. (Perl can be made to issue a warning.)

       (e)  If PCRE2_UNGREEDY is set, the greediness of the repetition quanti-
       fiers is inverted, that is, by default they are not greedy, but if fol-
       lowed by a question mark they are.

       (f)  PCRE2_ANCHORED  can be used at matching time to force a pattern to
       be tried only at the first matching position in the subject string.

       (g)    The    PCRE2_NOTBOL,    PCRE2_NOTEOL,     PCRE2_NOTEMPTY     and
       PCRE2_NOTEMPTY_ATSTART options have no Perl equivalents.

       (h)  The  \R escape sequence can be restricted to match only CR, LF, or
       CRLF by the PCRE2_BSR_ANYCRLF option.

       (i) The callout facility is PCRE2-specific.  Perl  supports  codeblocks
       and variable interpolation, but not general hooks on every match.

       (j) The partial matching facility is PCRE2-specific.

       (k)  The  alternative matching function (pcre2_dfa_match() matches in a
       different way and is not Perl-compatible.

       (l) PCRE2 recognizes some special sequences such as (*CR) or  (*NO_JIT)
       at  the  start  of  a  pattern  that set overall options that cannot be
       changed within the pattern.

       18. The Perl /a modifier restricts /d numbers to pure  ascii,  and  the
       /aa  modifier  restricts  /i  case-insensitive  matching to pure ascii,
       ignoring Unicode rules. This  separation  cannot  be  represented  with
       PCRE2_UCP.

       19. Perl has different limits than PCRE2. See the pcre2limit documenta-
       tion for details. Perl went with 5.10 from recursion to iteration keep-
       ing the intermediate matches on the heap, which is ~10% slower but does
       not fall into any stack-overflow limit. PCRE2 made a similar change  at
       release  10.30,  and also has many build-time and run-time customizable
       limits.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 18 April 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2JIT(3)                Library Functions Manual                PCRE2JIT(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 JUST-IN-TIME COMPILER SUPPORT

       Just-in-time  compiling  is a heavyweight optimization that can greatly
       speed up pattern matching. However, it comes at the cost of extra  pro-
       cessing  before  the  match is performed, so it is of most benefit when
       the same pattern is going to be matched many times. This does not  nec-
       essarily  mean many calls of a matching function; if the pattern is not
       anchored, matching attempts may take place many times at various  posi-
       tions in the subject, even for a single call. Therefore, if the subject
       string is very long, it may still pay  to  use  JIT  even  for  one-off
       matches.  JIT  support  is  available  for all of the 8-bit, 16-bit and
       32-bit PCRE2 libraries.

       JIT support applies only to the  traditional  Perl-compatible  matching
       function.   It  does  not apply when the DFA matching function is being
       used. The code for this support was written by Zoltan Herczeg.


AVAILABILITY OF JIT SUPPORT

       JIT support is an optional feature of  PCRE2.  The  "configure"  option
       --enable-jit  (or  equivalent  CMake  option) must be set when PCRE2 is
       built if you want to use JIT. The support is limited to  the  following
       hardware platforms:

         ARM 32-bit (v5, v7, and Thumb2)
         ARM 64-bit
         Intel x86 32-bit and 64-bit
         MIPS 32-bit and 64-bit
         Power PC 32-bit and 64-bit
         SPARC 32-bit

       If --enable-jit is set on an unsupported platform, compilation fails.

       A  program  can  tell if JIT support is available by calling pcre2_con-
       fig() with the PCRE2_CONFIG_JIT option. The result is  1  when  JIT  is
       available,  and 0 otherwise. However, a simple program does not need to
       check this in order to use JIT. The API is implemented in  a  way  that
       falls  back  to the interpretive code if JIT is not available. For pro-
       grams that need the best possible performance, there is  also  a  "fast
       path" API that is JIT-specific.


SIMPLE USE OF JIT

       To  make use of the JIT support in the simplest way, all you have to do
       is to call pcre2_jit_compile() after successfully compiling  a  pattern
       with pcre2_compile(). This function has two arguments: the first is the
       compiled pattern pointer that was returned by pcre2_compile(), and  the
       second  is  zero  or  more of the following option bits: PCRE2_JIT_COM-
       PLETE, PCRE2_JIT_PARTIAL_HARD, or PCRE2_JIT_PARTIAL_SOFT.

       If JIT support is not available, a  call  to  pcre2_jit_compile()  does
       nothing  and returns PCRE2_ERROR_JIT_BADOPTION. Otherwise, the compiled
       pattern is passed to the JIT compiler, which turns it into machine code
       that executes much faster than the normal interpretive code, but yields
       exactly the same results. The returned value  from  pcre2_jit_compile()
       is zero on success, or a negative error code.

       There  is  a limit to the size of pattern that JIT supports, imposed by
       the size of machine stack that it uses. The exact rules are  not  docu-
       mented  because  they  may  change at any time, in particular, when new
       optimizations are introduced.  If a pattern  is  too  big,  a  call  to
       pcre2_jit_compile() returns PCRE2_ERROR_NOMEMORY.

       PCRE2_JIT_COMPLETE  requests the JIT compiler to generate code for com-
       plete matches. If you want to run partial matches using the  PCRE2_PAR-
       TIAL_HARD  or  PCRE2_PARTIAL_SOFT  options of pcre2_match(), you should
       set one or both of  the  other  options  as  well  as,  or  instead  of
       PCRE2_JIT_COMPLETE. The JIT compiler generates different optimized code
       for each of the three modes (normal, soft partial, hard partial).  When
       pcre2_match()  is  called,  the appropriate code is run if it is avail-
       able. Otherwise, the pattern is matched using interpretive code.

       You can call pcre2_jit_compile() multiple times for the  same  compiled
       pattern.  It does nothing if it has previously compiled code for any of
       the option bits. For example, you can call it once with  PCRE2_JIT_COM-
       PLETE  and  (perhaps  later,  when  you find you need partial matching)
       again with PCRE2_JIT_COMPLETE and PCRE2_JIT_PARTIAL_HARD. This time  it
       will ignore PCRE2_JIT_COMPLETE and just compile code for partial match-
       ing. If pcre2_jit_compile() is called with no option bits set, it imme-
       diately returns zero. This is an alternative way of testing whether JIT
       is available.

       At present, it is not possible to free JIT compiled  code  except  when
       the entire compiled pattern is freed by calling pcre2_code_free().

       In  some circumstances you may need to call additional functions. These
       are described in the  section  entitled  "Controlling  the  JIT  stack"
       below.

       There are some pcre2_match() options that are not supported by JIT, and
       there are also some pattern items that JIT cannot handle.  Details  are
       given  below.  In  both cases, matching automatically falls back to the
       interpretive code. If you want to know whether JIT  was  actually  used
       for  a particular match, you should arrange for a JIT callback function
       to be set up as described in the section entitled "Controlling the  JIT
       stack"  below,  even  if  you  do  not need to supply a non-default JIT
       stack. Such a callback function is called whenever JIT code is about to
       be  obeyed.  If the match-time options are not right for JIT execution,
       the callback function is not obeyed.

       If the JIT compiler finds an unsupported item, no JIT  data  is  gener-
       ated.  You  can find out if JIT matching is available after compiling a
       pattern by calling  pcre2_pattern_info()  with  the  PCRE2_INFO_JITSIZE
       option.  A non-zero result means that JIT compilation was successful. A
       result of 0 means that JIT support is not available, or the pattern was
       not  processed by pcre2_jit_compile(), or the JIT compiler was not able
       to handle the pattern.


UNSUPPORTED OPTIONS AND PATTERN ITEMS

       The pcre2_match() options that  are  supported  for  JIT  matching  are
       PCRE2_NOTBOL,   PCRE2_NOTEOL,  PCRE2_NOTEMPTY,  PCRE2_NOTEMPTY_ATSTART,
       PCRE2_NO_UTF_CHECK,  PCRE2_PARTIAL_HARD,  and  PCRE2_PARTIAL_SOFT.  The
       PCRE2_ANCHORED option is not supported at match time.

       If  the  PCRE2_NO_JIT option is passed to pcre2_match() it disables the
       use of JIT, forcing matching by the interpreter code.

       The only unsupported pattern items are \C (match a  single  data  unit)
       when  running in a UTF mode, and a callout immediately before an asser-
       tion condition in a conditional group.


RETURN VALUES FROM JIT MATCHING

       When a pattern is matched using JIT matching, the return values are the
       same  as  those  given by the interpretive pcre2_match() code, with the
       addition of one new error code: PCRE2_ERROR_JIT_STACKLIMIT. This  means
       that  the memory used for the JIT stack was insufficient. See "Control-
       ling the JIT stack" below for a discussion of JIT stack usage.

       The error code PCRE2_ERROR_MATCHLIMIT is returned by the  JIT  code  if
       searching  a  very large pattern tree goes on for too long, as it is in
       the same circumstance when JIT is not used, but the details of  exactly
       what is counted are not the same. The PCRE2_ERROR_DEPTHLIMIT error code
       is never returned when JIT matching is used.


CONTROLLING THE JIT STACK

       When the compiled JIT code runs, it needs a block of memory to use as a
       stack.   By  default,  it  uses 32K on the machine stack. However, some
       large  or  complicated  patterns  need  more  than  this.   The   error
       PCRE2_ERROR_JIT_STACKLIMIT  is  given  when  there is not enough stack.
       Three functions are provided for managing blocks of memory for  use  as
       JIT  stacks. There is further discussion about the use of JIT stacks in
       the section entitled "JIT stack FAQ" below.

       The pcre2_jit_stack_create() function creates a JIT  stack.  Its  argu-
       ments  are  a starting size, a maximum size, and a general context (for
       memory allocation functions, or NULL for standard  memory  allocation).
       It returns a pointer to an opaque structure of type pcre2_jit_stack, or
       NULL if there is an error. The pcre2_jit_stack_free() function is  used
       to  free a stack that is no longer needed. (For the technically minded:
       the address space is allocated by  mmap  or  VirtualAlloc.)  A  maximum
       stack size of 512K to 1M should be more than enough for any pattern.

       The  pcre2_jit_stack_assign()  function  specifies which stack JIT code
       should use. Its arguments are as follows:

         pcre2_match_context  *mcontext
         pcre2_jit_callback    callback
         void                 *data

       The first argument is a pointer to a match context. When this is subse-
       quently passed to a matching function, its information determines which
       JIT stack is used. There are three cases for the values  of  the  other
       two options:

         (1) If callback is NULL and data is NULL, an internal 32K block
             on the machine stack is used. This is the default when a match
             context is created.

         (2) If callback is NULL and data is not NULL, data must be
             a pointer to a valid JIT stack, the result of calling
             pcre2_jit_stack_create().

         (3) If callback is not NULL, it must point to a function that is
             called with data as an argument at the start of matching, in
             order to set up a JIT stack. If the return from the callback
             function is NULL, the internal 32K stack is used; otherwise the
             return value must be a valid JIT stack, the result of calling
             pcre2_jit_stack_create().

       A  callback function is obeyed whenever JIT code is about to be run; it
       is not obeyed when pcre2_match() is called with options that are incom-
       patible  for JIT matching. A callback function can therefore be used to
       determine whether a match operation was  executed  by  JIT  or  by  the
       interpreter.

       You may safely use the same JIT stack for more than one pattern (either
       by assigning directly or by callback), as  long  as  the  patterns  are
       matched sequentially in the same thread. Currently, the only way to set
       up non-sequential matches in one thread is to use callouts: if a  call-
       out  function starts another match, that match must use a different JIT
       stack to the one used for currently suspended match(es).

       In a multithread application, if you do not specify a JIT stack, or  if
       you  assign  or  pass  back  NULL from a callback, that is thread-safe,
       because each thread has its own machine stack. However, if  you  assign
       or  pass  back a non-NULL JIT stack, this must be a different stack for
       each thread so that the application is thread-safe.

       Strictly speaking, even more is allowed. You can assign the  same  non-
       NULL  stack  to a match context that is used by any number of patterns,
       as long as they are not used for matching by multiple  threads  at  the
       same  time.  For  example, you could use the same stack in all compiled
       patterns, with a global mutex in the callback to wait until  the  stack
       is available for use. However, this is an inefficient solution, and not
       recommended.

       This is a suggestion for how a multithreaded program that needs to  set
       up non-default JIT stacks might operate:

         During thread initalization
           thread_local_var = pcre2_jit_stack_create(...)

         During thread exit
           pcre2_jit_stack_free(thread_local_var)

         Use a one-line callback function
           return thread_local_var

       All  the  functions  described in this section do nothing if JIT is not
       available.


JIT STACK FAQ

       (1) Why do we need JIT stacks?

       PCRE2 (and JIT) is a recursive, depth-first engine, so it needs a stack
       where  the local data of the current node is pushed before checking its
       child nodes.  Allocating real machine stack on some platforms is diffi-
       cult. For example, the stack chain needs to be updated every time if we
       extend the stack on PowerPC.  Although it  is  possible,  its  updating
       time overhead decreases performance. So we do the recursion in memory.

       (2) Why don't we simply allocate blocks of memory with malloc()?

       Modern  operating  systems  have  a  nice  feature: they can reserve an
       address space instead of allocating memory. We can safely allocate mem-
       ory  pages  inside  this address space, so the stack could grow without
       moving memory data (this is important because of pointers). Thus we can
       allocate  1M  address space, and use only a single memory page (usually
       4K) if that is enough. However, we can still grow up to 1M  anytime  if
       needed.

       (3) Who "owns" a JIT stack?

       The owner of the stack is the user program, not the JIT studied pattern
       or anything else. The user program must ensure that if a stack is being
       used by pcre2_match(), (that is, it is assigned to a match context that
       is passed to the pattern currently running), that  stack  must  not  be
       used  by any other threads (to avoid overwriting the same memory area).
       The best practice for multithreaded programs is to allocate a stack for
       each thread, and return this stack through the JIT callback function.

       (4) When should a JIT stack be freed?

       You can free a JIT stack at any time, as long as it will not be used by
       pcre2_match() again. When you assign the stack to a match context, only
       a  pointer  is  set. There is no reference counting or any other magic.
       You can free compiled patterns, contexts, and stacks in any order, any-
       time.  Just  do not call pcre2_match() with a match context pointing to
       an already freed stack, as that will cause SEGFAULT. (Also, do not free
       a  stack  currently  used  by pcre2_match() in another thread). You can
       also replace the stack in a context at any time when it is not in  use.
       You should free the previous stack before assigning a replacement.

       (5)  Should  I  allocate/free  a  stack every time before/after calling
       pcre2_match()?

       No, because this is too costly in  terms  of  resources.  However,  you
       could  implement  some clever idea which release the stack if it is not
       used in let's say two minutes. The JIT callback  can  help  to  achieve
       this without keeping a list of patterns.

       (6)  OK, the stack is for long term memory allocation. But what happens
       if a pattern causes stack overflow with a stack of 1M? Is that 1M  kept
       until the stack is freed?

       Especially  on embedded sytems, it might be a good idea to release mem-
       ory sometimes without freeing the stack. There is no API  for  this  at
       the  moment.  Probably a function call which returns with the currently
       allocated memory for any stack and another which allows releasing  mem-
       ory (shrinking the stack) would be a good idea if someone needs this.

       (7) This is too much of a headache. Isn't there any better solution for
       JIT stack handling?

       No, thanks to Windows. If POSIX threads were used everywhere, we  could
       throw out this complicated API.


FREEING JIT SPECULATIVE MEMORY

       void pcre2_jit_free_unused_memory(pcre2_general_context *gcontext);

       The JIT executable allocator does not free all memory when it is possi-
       ble.  It expects new allocations, and keeps some free memory around  to
       improve  allocation  speed. However, in low memory conditions, it might
       be better to free all possible memory. You can cause this to happen  by
       calling  pcre2_jit_free_unused_memory(). Its argument is a general con-
       text, for custom memory management, or NULL for standard memory manage-
       ment.


EXAMPLE CODE

       This  is  a  single-threaded example that specifies a JIT stack without
       using a callback. A real program should include  error  checking  after
       all the function calls.

         int rc;
         pcre2_code *re;
         pcre2_match_data *match_data;
         pcre2_match_context *mcontext;
         pcre2_jit_stack *jit_stack;

         re = pcre2_compile(pattern, PCRE2_ZERO_TERMINATED, 0,
           &errornumber, &erroffset, NULL);
         rc = pcre2_jit_compile(re, PCRE2_JIT_COMPLETE);
         mcontext = pcre2_match_context_create(NULL);
         jit_stack = pcre2_jit_stack_create(32*1024, 512*1024, NULL);
         pcre2_jit_stack_assign(mcontext, NULL, jit_stack);
         match_data = pcre2_match_data_create(re, 10);
         rc = pcre2_match(re, subject, length, 0, 0, match_data, mcontext);
         /* Process result */

         pcre2_code_free(re);
         pcre2_match_data_free(match_data);
         pcre2_match_context_free(mcontext);
         pcre2_jit_stack_free(jit_stack);


JIT FAST PATH API

       Because the API described above falls back to interpreted matching when
       JIT is not available, it is convenient for programs  that  are  written
       for  general  use  in  many  environments.  However,  calling  JIT  via
       pcre2_match() does have a performance impact. Programs that are written
       for  use  where  JIT  is known to be available, and which need the best
       possible performance, can instead use a "fast path"  API  to  call  JIT
       matching  directly instead of calling pcre2_match() (obviously only for
       patterns that have been successfully processed by pcre2_jit_compile()).

       The fast path  function  is  called  pcre2_jit_match(),  and  it  takes
       exactly the same arguments as pcre2_match(). The return values are also
       the same, plus PCRE2_ERROR_JIT_BADOPTION if a matching mode (partial or
       complete)  is  requested that was not compiled. Unsupported option bits
       (for example, PCRE2_ANCHORED)  are  ignored,  as  is  the  PCRE2_NO_JIT
       option.

       When  you call pcre2_match(), as well as testing for invalid options, a
       number of other sanity checks are performed on the arguments. For exam-
       ple, if the subject pointer is NULL, an immediate error is given. Also,
       unless PCRE2_NO_UTF_CHECK is set, a UTF subject string  is  tested  for
       validity.  In the interests of speed, these checks do not happen on the
       JIT fast path, and if invalid data is passed, the result is undefined.

       Bypassing the sanity checks and the  pcre2_match()  wrapping  can  give
       speedups of more than 10%.


SEE ALSO

       pcre2api(3)


AUTHOR

       Philip Hazel (FAQ by Zoltan Herczeg)
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 31 March 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2LIMITS(3)             Library Functions Manual             PCRE2LIMITS(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

SIZE AND OTHER LIMITATIONS

       There are some size limitations in PCRE2 but it is hoped that they will
       never in practice be relevant.

       The maximum size of a compiled pattern is approximately 64K code  units
       for  the  8-bit  and  16-bit  libraries  if  PCRE2 is compiled with the
       default internal linkage size, which is 2 bytes for these libraries. If
       you  want  to  process regular expressions that are truly enormous, you
       can compile PCRE2 with an internal linkage size of 3 or 4 (when  build-
       ing  the  16-bit library, 3 is rounded up to 4). See the README file in
       the source distribution and the pcre2build documentation  for  details.
       In  these  cases the limit is substantially larger.  However, the speed
       of execution is slower. In the 32-bit  library,  the  internal  linkage
       size is always 4.

       The maximum length of a source pattern string is essentially unlimited;
       it is the largest number a PCRE2_SIZE variable can hold.  However,  the
       program that calls pcre2_compile() can specify a smaller limit.

       The maximum length (in code units) of a subject string is one less than
       the largest number a PCRE2_SIZE variable can  hold.  PCRE2_SIZE  is  an
       unsigned  integer  type,  usually  defined as size_t. Its maximum value
       (that is ~(PCRE2_SIZE)0) is reserved as a special indicator  for  zero-
       terminated strings and unset offsets.

       All values in repeating quantifiers must be less than 65536.

       The maximum length of a lookbehind assertion is 65535 characters.

       There is no limit to the number of parenthesized subpatterns, but there
       can be no more than 65535 capturing subpatterns. There is,  however,  a
       limit  to  the  depth  of  nesting  of parenthesized subpatterns of all
       kinds. This is imposed in order to limit the  amount  of  system  stack
       used  at compile time. The default limit can be specified when PCRE2 is
       built; the default default is 250. An application can change this limit
       by  calling pcre2_set_parens_nest_limit() to set the limit in a compile
       context.

       The maximum length of name for a named subpattern is 32 code units, and
       the maximum number of named subpatterns is 10000.

       The  maximum  length  of  a  name  in  a (*MARK), (*PRUNE), (*SKIP), or
       (*THEN) verb is 255 code units for the 8-bit  library  and  65535  code
       units for the 16-bit and 32-bit libraries.

       The  maximum  length  of  a string argument to a callout is the largest
       number a 32-bit unsigned integer can hold.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 30 March 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2MATCHING(3)           Library Functions Manual           PCRE2MATCHING(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 MATCHING ALGORITHMS

       This document describes the two different algorithms that are available
       in PCRE2 for matching a compiled regular  expression  against  a  given
       subject  string.  The  "standard"  algorithm is the one provided by the
       pcre2_match() function. This works in the same as  as  Perl's  matching
       function,  and  provide a Perl-compatible matching operation. The just-
       in-time (JIT) optimization that is described in the pcre2jit documenta-
       tion is compatible with this function.

       An alternative algorithm is provided by the pcre2_dfa_match() function;
       it operates in a different way, and is not Perl-compatible. This alter-
       native  has  advantages  and  disadvantages  compared with the standard
       algorithm, and these are described below.

       When there is only one possible way in which a given subject string can
       match  a pattern, the two algorithms give the same answer. A difference
       arises, however, when there are multiple possibilities. For example, if
       the pattern

         ^<.*>

       is matched against the string

         <something> <something else> <something further>

       there are three possible answers. The standard algorithm finds only one
       of them, whereas the alternative algorithm finds all three.


REGULAR EXPRESSIONS AS TREES

       The set of strings that are matched by a regular expression can be rep-
       resented  as  a  tree structure. An unlimited repetition in the pattern
       makes the tree of infinite size, but it is still a tree.  Matching  the
       pattern  to a given subject string (from a given starting point) can be
       thought of as a search of the tree.  There are two  ways  to  search  a
       tree:  depth-first  and  breadth-first, and these correspond to the two
       matching algorithms provided by PCRE2.


THE STANDARD MATCHING ALGORITHM

       In the terminology of Jeffrey Friedl's book "Mastering Regular  Expres-
       sions",  the  standard  algorithm  is an "NFA algorithm". It conducts a
       depth-first search of the pattern tree. That is, it  proceeds  along  a
       single path through the tree, checking that the subject matches what is
       required. When there is a mismatch, the algorithm  tries  any  alterna-
       tives  at  the  current point, and if they all fail, it backs up to the
       previous branch point in the  tree,  and  tries  the  next  alternative
       branch  at  that  level.  This often involves backing up (moving to the
       left) in the subject string as well.  The  order  in  which  repetition
       branches  are  tried  is controlled by the greedy or ungreedy nature of
       the quantifier.

       If a leaf node is reached, a matching string has  been  found,  and  at
       that  point the algorithm stops. Thus, if there is more than one possi-
       ble match, this algorithm returns the first one that it finds.  Whether
       this  is the shortest, the longest, or some intermediate length depends
       on the way the greedy and ungreedy repetition quantifiers are specified
       in the pattern.

       Because  it  ends  up  with a single path through the tree, it is rela-
       tively straightforward for this algorithm to keep  track  of  the  sub-
       strings  that  are  matched  by portions of the pattern in parentheses.
       This provides support for capturing parentheses and back references.


THE ALTERNATIVE MATCHING ALGORITHM

       This algorithm conducts a breadth-first search of  the  tree.  Starting
       from  the  first  matching  point  in the subject, it scans the subject
       string from left to right, once, character by character, and as it does
       this,  it remembers all the paths through the tree that represent valid
       matches. In Friedl's terminology, this is a kind  of  "DFA  algorithm",
       though  it is not implemented as a traditional finite state machine (it
       keeps multiple states active simultaneously).

       Although the general principle of this matching algorithm  is  that  it
       scans  the subject string only once, without backtracking, there is one
       exception: when a lookaround assertion is encountered,  the  characters
       following  or  preceding  the  current  point  have to be independently
       inspected.

       The scan continues until either the end of the subject is  reached,  or
       there  are  no more unterminated paths. At this point, terminated paths
       represent the different matching possibilities (if there are none,  the
       match  has  failed).   Thus,  if there is more than one possible match,
       this algorithm finds all of them, and in particular, it finds the long-
       est.  The  matches are returned in decreasing order of length. There is
       an option to stop the algorithm after the first match (which is  neces-
       sarily the shortest) is found.

       Note that all the matches that are found start at the same point in the
       subject. If the pattern

         cat(er(pillar)?)?

       is matched against the string "the caterpillar catchment",  the  result
       is  the  three  strings "caterpillar", "cater", and "cat" that start at
       the fifth character of the subject. The algorithm  does  not  automati-
       cally move on to find matches that start at later positions.

       PCRE2's "auto-possessification" optimization usually applies to charac-
       ter repeats at the end of a pattern (as well as internally). For  exam-
       ple, the pattern "a\d+" is compiled as if it were "a\d++" because there
       is no point even considering the possibility of backtracking  into  the
       repeated  digits.  For  DFA matching, this means that only one possible
       match is found. If you really do want multiple matches in  such  cases,
       either  use  an ungreedy repeat ("a\d+?") or set the PCRE2_NO_AUTO_POS-
       SESS option when compiling.

       There are a number of features of PCRE2 regular  expressions  that  are
       not  supported  by the alternative matching algorithm. They are as fol-
       lows:

       1. Because the algorithm finds all  possible  matches,  the  greedy  or
       ungreedy  nature  of  repetition quantifiers is not relevant (though it
       may affect auto-possessification, as just described). During  matching,
       greedy  and  ungreedy  quantifiers are treated in exactly the same way.
       However, possessive quantifiers can make a difference when what follows
       could  also  match  what  is  quantified, for example in a pattern like
       this:

         ^a++\w!

       This pattern matches "aaab!" but not "aaa!", which would be matched  by
       a  non-possessive quantifier. Similarly, if an atomic group is present,
       it is matched as if it were a standalone pattern at the current  point,
       and  the  longest match is then "locked in" for the rest of the overall
       pattern.

       2. When dealing with multiple paths through the tree simultaneously, it
       is  not  straightforward  to  keep track of captured substrings for the
       different matching possibilities, and PCRE2's  implementation  of  this
       algorithm does not attempt to do this. This means that no captured sub-
       strings are available.

       3. Because no substrings are captured, back references within the  pat-
       tern are not supported, and cause errors if encountered.

       4.  For  the same reason, conditional expressions that use a backrefer-
       ence as the condition or test for a specific group  recursion  are  not
       supported.

       5.  Because  many  paths  through the tree may be active, the \K escape
       sequence, which resets the start of the match when encountered (but may
       be  on  some  paths  and not on others), is not supported. It causes an
       error if encountered.

       6. Callouts are supported, but the value of the  capture_top  field  is
       always 1, and the value of the capture_last field is always 0.

       7.  The  \C  escape  sequence, which (in the standard algorithm) always
       matches a single code unit, even in a UTF mode,  is  not  supported  in
       these  modes,  because the alternative algorithm moves through the sub-
       ject string one character (not code unit) at a  time,  for  all  active
       paths through the tree.

       8.  Except for (*FAIL), the backtracking control verbs such as (*PRUNE)
       are not supported. (*FAIL) is supported, and  behaves  like  a  failing
       negative assertion.


ADVANTAGES OF THE ALTERNATIVE ALGORITHM

       Using  the alternative matching algorithm provides the following advan-
       tages:

       1. All possible matches (at a single point in the subject) are automat-
       ically  found,  and  in particular, the longest match is found. To find
       more than one match using the standard algorithm, you have to do kludgy
       things with callouts.

       2.  Because  the  alternative  algorithm  scans the subject string just
       once, and never needs to backtrack (except for lookbehinds), it is pos-
       sible  to  pass  very  long subject strings to the matching function in
       several pieces, checking for partial matching each time. Although it is
       also  possible  to  do  multi-segment matching using the standard algo-
       rithm, by retaining partially matched substrings, it  is  more  compli-
       cated. The pcre2partial documentation gives details of partial matching
       and discusses multi-segment matching.


DISADVANTAGES OF THE ALTERNATIVE ALGORITHM

       The alternative algorithm suffers from a number of disadvantages:

       1. It is substantially slower than  the  standard  algorithm.  This  is
       partly  because  it has to search for all possible matches, but is also
       because it is less susceptible to optimization.

       2. Capturing parentheses and back references are not supported.

       3. Although atomic groups are supported, their use does not provide the
       performance advantage that it does for the standard algorithm.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 29 September 2014
       Copyright (c) 1997-2014 University of Cambridge.
------------------------------------------------------------------------------


PCRE2PARTIAL(3)            Library Functions Manual            PCRE2PARTIAL(3)



NAME
       PCRE2 - Perl-compatible regular expressions

PARTIAL MATCHING IN PCRE2

       In  normal  use  of  PCRE2,  if  the subject string that is passed to a
       matching function matches as far as it goes, but is too short to  match
       the  entire pattern, PCRE2_ERROR_NOMATCH is returned. There are circum-
       stances where it might be helpful to distinguish this case  from  other
       cases in which there is no match.

       Consider, for example, an application where a human is required to type
       in data for a field with specific formatting requirements.  An  example
       might be a date in the form ddmmmyy, defined by this pattern:

         ^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$

       If the application sees the user's keystrokes one by one, and can check
       that what has been typed so far is potentially valid,  it  is  able  to
       raise  an  error  as  soon  as  a  mistake  is made, by beeping and not
       reflecting the character that has been typed, for example. This immedi-
       ate  feedback is likely to be a better user interface than a check that
       is delayed until the entire string has been entered.  Partial  matching
       can  also be useful when the subject string is very long and is not all
       available at once.

       PCRE2 supports partial matching by means of the PCRE2_PARTIAL_SOFT  and
       PCRE2_PARTIAL_HARD  options,  which  can be set when calling a matching
       function.  The difference between the two options is whether or  not  a
       partial match is preferred to an alternative complete match, though the
       details differ between the two types  of  matching  function.  If  both
       options are set, PCRE2_PARTIAL_HARD takes precedence.

       If  you  want to use partial matching with just-in-time optimized code,
       you must call pcre2_jit_compile() with one or both of these options:

         PCRE2_JIT_PARTIAL_SOFT
         PCRE2_JIT_PARTIAL_HARD

       PCRE2_JIT_COMPLETE should also be set if you are going to run  non-par-
       tial  matches  on the same pattern. If the appropriate JIT mode has not
       been compiled, interpretive matching code is used.

       Setting a partial matching option  disables  two  of  PCRE2's  standard
       optimizations. PCRE2 remembers the last literal code unit in a pattern,
       and abandons matching immediately if it is not present in  the  subject
       string.  This  optimization  cannot  be  used for a subject string that
       might match only partially. PCRE2 also knows the minimum  length  of  a
       matching  string,  and  does not bother to run the matching function on
       shorter strings. This optimization is also disabled for partial  match-
       ing.


PARTIAL MATCHING USING pcre2_match()

       A  partial  match occurs during a call to pcre2_match() when the end of
       the subject string is reached successfully, but  matching  cannot  con-
       tinue because more characters are needed. However, at least one charac-
       ter in the subject must have been inspected. This  character  need  not
       form part of the final matched string; lookbehind assertions and the \K
       escape sequence provide ways of inspecting characters before the  start
       of  a matched string. The requirement for inspecting at least one char-
       acter exists because an empty string can  always  be  matched;  without
       such  a  restriction  there would always be a partial match of an empty
       string at the end of the subject.

       When a partial match is returned, the first two elements in the ovector
       point to the portion of the subject that was matched, but the values in
       the rest of the ovector are undefined. The appearance of \K in the pat-
       tern has no effect for a partial match. Consider this pattern:

         /abc\K123/

       If it is matched against "456abc123xyz" the result is a complete match,
       and the ovector defines the matched string as "123", because \K  resets
       the  "start  of  match" point. However, if a partial match is requested
       and the subject string is "456abc12", a partial match is found for  the
       string  "abc12",  because  all these characters are needed for a subse-
       quent re-match with additional characters.

       What happens when a partial match is identified depends on which of the
       two partial matching options are set.

   PCRE2_PARTIAL_SOFT WITH pcre2_match()

       If  PCRE2_PARTIAL_SOFT  is  set when pcre2_match() identifies a partial
       match, the partial match is remembered, but matching continues as  nor-
       mal,  and  other  alternatives in the pattern are tried. If no complete
       match  can  be  found,  PCRE2_ERROR_PARTIAL  is  returned  instead   of
       PCRE2_ERROR_NOMATCH.

       This  option  is "soft" because it prefers a complete match over a par-
       tial match.  All the various matching items in a pattern behave  as  if
       the  subject string is potentially complete. For example, \z, \Z, and $
       match at the end of the subject, as normal, and for \b and \B  the  end
       of the subject is treated as a non-alphanumeric.

       If  there  is more than one partial match, the first one that was found
       provides the data that is returned. Consider this pattern:

         /123\w+X|dogY/

       If this is matched against the subject string "abc123dog", both  alter-
       natives  fail  to  match,  but the end of the subject is reached during
       matching, so PCRE2_ERROR_PARTIAL is returned. The offsets are set to  3
       and  9, identifying "123dog" as the first partial match that was found.
       (In this example, there are two partial matches, because "dog"  on  its
       own partially matches the second alternative.)

   PCRE2_PARTIAL_HARD WITH pcre2_match()

       If  PCRE2_PARTIAL_HARD is set for pcre2_match(), PCRE2_ERROR_PARTIAL is
       returned as soon as a partial match is  found,  without  continuing  to
       search  for possible complete matches. This option is "hard" because it
       prefers an earlier partial match over a later complete match. For  this
       reason,  the  assumption  is  made that the end of the supplied subject
       string may not be the true end of the available data, and  so,  if  \z,
       \Z,  \b, \B, or $ are encountered at the end of the subject, the result
       is PCRE2_ERROR_PARTIAL, provided that at least  one  character  in  the
       subject has been inspected.

   Comparing hard and soft partial matching

       The  difference  between the two partial matching options can be illus-
       trated by a pattern such as:

         /dog(sbody)?/

       This matches either "dog" or "dogsbody", greedily (that is, it  prefers
       the  longer  string  if  possible). If it is matched against the string
       "dog" with PCRE2_PARTIAL_SOFT, it yields a complete  match  for  "dog".
       However,  if  PCRE2_PARTIAL_HARD is set, the result is PCRE2_ERROR_PAR-
       TIAL. On the other hand, if the pattern is made ungreedy the result  is
       different:

         /dog(sbody)??/

       In  this  case  the  result  is always a complete match because that is
       found first, and matching never  continues  after  finding  a  complete
       match. It might be easier to follow this explanation by thinking of the
       two patterns like this:

         /dog(sbody)?/    is the same as  /dogsbody|dog/
         /dog(sbody)??/   is the same as  /dog|dogsbody/

       The second pattern will never match "dogsbody", because it will  always
       find the shorter match first.


PARTIAL MATCHING USING pcre2_dfa_match()

       The DFA functions move along the subject string character by character,
       without backtracking, searching for  all  possible  matches  simultane-
       ously.  If the end of the subject is reached before the end of the pat-
       tern, there is the possibility of a partial match, again provided  that
       at least one character has been inspected.

       When PCRE2_PARTIAL_SOFT is set, PCRE2_ERROR_PARTIAL is returned only if
       there have been no complete matches. Otherwise,  the  complete  matches
       are  returned.   However, if PCRE2_PARTIAL_HARD is set, a partial match
       takes precedence over any complete matches. The portion of  the  string
       that was matched when the longest partial match was found is set as the
       first matching string.

       Because the DFA functions always search for all possible  matches,  and
       there  is  no  difference between greedy and ungreedy repetition, their
       behaviour is different from  the  standard  functions  when  PCRE2_PAR-
       TIAL_HARD  is  set.  Consider  the  string  "dog"  matched  against the
       ungreedy pattern shown above:

         /dog(sbody)??/

       Whereas the standard function stops as soon as it  finds  the  complete
       match  for  "dog",  the  DFA  function also finds the partial match for
       "dogsbody", and so returns that when PCRE2_PARTIAL_HARD is set.


PARTIAL MATCHING AND WORD BOUNDARIES

       If a pattern ends with one of sequences \b or \B, which test  for  word
       boundaries,  partial matching with PCRE2_PARTIAL_SOFT can give counter-
       intuitive results. Consider this pattern:

         /\bcat\b/

       This matches "cat", provided there is a word boundary at either end. If
       the subject string is "the cat", the comparison of the final "t" with a
       following character cannot take place, so a  partial  match  is  found.
       However,  normal  matching carries on, and \b matches at the end of the
       subject when the last character is a letter, so  a  complete  match  is
       found.   The  result,  therefore,  is  not  PCRE2_ERROR_PARTIAL.  Using
       PCRE2_PARTIAL_HARD in this case does yield PCRE2_ERROR_PARTIAL, because
       then the partial match takes precedence.


EXAMPLE OF PARTIAL MATCHING USING PCRE2TEST

       If  the  partial_soft  (or  ps) modifier is present on a pcre2test data
       line, the PCRE2_PARTIAL_SOFT option is used for the match.  Here  is  a
       run of pcre2test that uses the date example quoted above:

           re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
         data> 25jun04\=ps
          0: 25jun04
          1: jun
         data> 25dec3\=ps
         Partial match: 23dec3
         data> 3ju\=ps
         Partial match: 3ju
         data> 3juj\=ps
         No match
         data> j\=ps
         No match

       The  first  data  string  is matched completely, so pcre2test shows the
       matched substrings. The remaining four strings do not  match  the  com-
       plete pattern, but the first two are partial matches. Similar output is
       obtained if DFA matching is used.

       If the partial_hard (or ph) modifier is present  on  a  pcre2test  data
       line, the PCRE2_PARTIAL_HARD option is set for the match.


MULTI-SEGMENT MATCHING WITH pcre2_dfa_match()

       When  a  partial match has been found using a DFA matching function, it
       is possible to continue the match by providing additional subject  data
       and  calling  the function again with the same compiled regular expres-
       sion, this time setting the PCRE2_DFA_RESTART option. You must pass the
       same working space as before, because this is where details of the pre-
       vious partial match are stored. Here is an example using pcre2test:

           re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
         data> 23ja\=dfa,ps
         Partial match: 23ja
         data> n05\=dfa,dfa_restart
          0: n05

       The first call has "23ja" as the subject, and requests  partial  match-
       ing;  the  second  call  has  "n05"  as  the  subject for the continued
       (restarted) match.  Notice that when the match is  complete,  only  the
       last  part  is  shown;  PCRE2 does not retain the previously partially-
       matched string. It is up to the calling program to do that if it  needs
       to.

       That means that, for an unanchored pattern, if a continued match fails,
       it is not possible to try again at  a  new  starting  point.  All  this
       facility  is  capable  of  doing  is continuing with the previous match
       attempt. In the previous example, if the second set of data  is  "ug23"
       the  result is no match, even though there would be a match for "aug23"
       if the entire string were given at once. Depending on the  application,
       this may or may not be what you want.  The only way to allow for start-
       ing again at the next character is to retain the matched  part  of  the
       subject and try a new complete match.

       You  can  set the PCRE2_PARTIAL_SOFT or PCRE2_PARTIAL_HARD options with
       PCRE2_DFA_RESTART to continue partial matching over multiple  segments.
       This  facility can be used to pass very long subject strings to the DFA
       matching functions.


MULTI-SEGMENT MATCHING WITH pcre2_match()

       Unlike the DFA function, it is not possible  to  restart  the  previous
       match with a new segment of data when using pcre2_match(). Instead, new
       data must be added to the previous subject string, and the entire match
       re-run,  starting from the point where the partial match occurred. Ear-
       lier data can be discarded.

       It is best to use PCRE2_PARTIAL_HARD in this situation, because it does
       not  treat the end of a segment as the end of the subject when matching
       \z, \Z, \b, \B, and $. Consider  an  unanchored  pattern  that  matches
       dates:

           re> /\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d/
         data> The date is 23ja\=ph
         Partial match: 23ja

       At  this stage, an application could discard the text preceding "23ja",
       add on text from the next  segment,  and  call  the  matching  function
       again.  Unlike  the  DFA  matching function, the entire matching string
       must always be available, and the complete matching process occurs  for
       each call, so more memory and more processing time is needed.


ISSUES WITH MULTI-SEGMENT MATCHING

       Certain types of pattern may give problems with multi-segment matching,
       whichever matching function is used.

       1. If the pattern contains a test for the beginning of a line, you need
       to  pass  the  PCRE2_NOTBOL option when the subject string for any call
       does start at the beginning of a line. There  is  also  a  PCRE2_NOTEOL
       option, but in practice when doing multi-segment matching you should be
       using PCRE2_PARTIAL_HARD, which includes the effect of PCRE2_NOTEOL.

       2. If a pattern contains a lookbehind assertion, characters  that  pre-
       cede  the start of the partial match may have been inspected during the
       matching process.  When using pcre2_match(), sufficient characters must
       be  retained  for  the  next  match attempt. You can ensure that enough
       characters are retained by doing the following:

       Before doing any matching, find the length of the longest lookbehind in
       the     pattern    by    calling    pcre2_pattern_info()    with    the
       PCRE2_INFO_MAXLOOKBEHIND option. Note that the resulting  count  is  in
       characters, not code units. After a partial match, moving back from the
       ovector[0] offset in the subject by the number of characters given  for
       the  maximum lookbehind gets you to the earliest character that must be
       retained. In a non-UTF or a 32-bit situation, moving  back  is  just  a
       subtraction,  but in UTF-8 or UTF-16 you have to count characters while
       moving back through the code units.

       Characters before the point you have now reached can be discarded,  and
       after  the  next segment has been added to what is retained, you should
       run the next match with the startoffset argument set so that the  match
       begins at the same point as before.

       For  example, if the pattern "(?<=123)abc" is partially matched against
       the string "xx123ab", the ovector offsets are 5 and 7 ("ab"). The maxi-
       mum  lookbehind  count  is  3, so all characters before offset 2 can be
       discarded. The value of startoffset for the next  match  should  be  3.
       When  pcre2test  displays  a partial match, it indicates the lookbehind
       characters with '<' characters:

           re> "(?<=123)abc"
         data> xx123ab\=ph
         Partial match: 123ab
                        <<<

       3. Because a partial match must always contain at least one  character,
       what  might  be  considered a partial match of an empty string actually
       gives a "no match" result. For example:

           re> /c(?<=abc)x/
         data> ab\=ps
         No match

       If the next segment begins "cx", a match should be found, but this will
       only  happen  if characters from the previous segment are retained. For
       this reason, a "no match" result  should  be  interpreted  as  "partial
       match of an empty string" when the pattern contains lookbehinds.

       4.  Matching  a subject string that is split into multiple segments may
       not always produce exactly the same result as matching over one  single
       long  string,  especially  when PCRE2_PARTIAL_SOFT is used. The section
       "Partial Matching and Word Boundaries" above describes  an  issue  that
       arises  if  the  pattern ends with \b or \B. Another kind of difference
       may occur when there are multiple matching possibilities, because  (for
       PCRE2_PARTIAL_SOFT) a partial match result is given only when there are
       no completed matches. This means that as soon as the shortest match has
       been  found,  continuation to a new subject segment is no longer possi-
       ble. Consider this pcre2test example:

           re> /dog(sbody)?/
         data> dogsb\=ps
          0: dog
         data> do\=ps,dfa
         Partial match: do
         data> gsb\=ps,dfa,dfa_restart
          0: g
         data> dogsbody\=dfa
          0: dogsbody
          1: dog

       The first data line passes the string "dogsb" to  a  standard  matching
       function, setting the PCRE2_PARTIAL_SOFT option. Although the string is
       a partial match for "dogsbody", the result is not  PCRE2_ERROR_PARTIAL,
       because  the  shorter string "dog" is a complete match. Similarly, when
       the subject is presented to a DFA matching function  in  several  parts
       ("do"  and  "gsb"  being  the first two) the match stops when "dog" has
       been found, and it is not possible to continue.  On the other hand,  if
       "dogsbody"  is  presented  as  a single string, a DFA matching function
       finds both matches.

       Because of these problems, it is best to  use  PCRE2_PARTIAL_HARD  when
       matching  multi-segment  data.  The  example above then behaves differ-
       ently:

           re> /dog(sbody)?/
         data> dogsb\=ph
         Partial match: dogsb
         data> do\=ps,dfa
         Partial match: do
         data> gsb\=ph,dfa,dfa_restart
         Partial match: gsb

       5. Patterns that contain alternatives at the top level which do not all
       start  with  the  same  pattern  item  may  not  work  as expected when
       PCRE2_DFA_RESTART is used. For example, consider this pattern:

         1234|3789

       If the first part of the subject is "ABC123", a partial  match  of  the
       first  alternative  is found at offset 3. There is no partial match for
       the second alternative, because such a match does not start at the same
       point  in  the  subject  string. Attempting to continue with the string
       "7890" does not yield a match  because  only  those  alternatives  that
       match  at  one  point in the subject are remembered. The problem arises
       because the start of the second alternative matches  within  the  first
       alternative.  There  is  no  problem with anchored patterns or patterns
       such as:

         1234|ABCD

       where no string can be a partial match for both alternatives.  This  is
       not  a  problem  if  a  standard matching function is used, because the
       entire match has to be rerun each time:

           re> /1234|3789/
         data> ABC123\=ph
         Partial match: 123
         data> 1237890
          0: 3789

       Of course, instead of using PCRE2_DFA_RESTART, the  same  technique  of
       re-running  the  entire  match  can  also be used with the DFA matching
       function. Another possibility is to work with two buffers. If a partial
       match  at  offset  n in the first buffer is followed by "no match" when
       PCRE2_DFA_RESTART is used on the second buffer, you can then try a  new
       match starting at offset n+1 in the first buffer.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 22 December 2014
       Copyright (c) 1997-2014 University of Cambridge.
------------------------------------------------------------------------------


PCRE2PATTERN(3)            Library Functions Manual            PCRE2PATTERN(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 REGULAR EXPRESSION DETAILS

       The  syntax and semantics of the regular expressions that are supported
       by PCRE2 are described in detail below. There is a quick-reference syn-
       tax  summary  in the pcre2syntax page. PCRE2 tries to match Perl syntax
       and semantics as closely as it can.  PCRE2 also supports some  alterna-
       tive  regular  expression syntax (which does not conflict with the Perl
       syntax) in order to provide some compatibility with regular expressions
       in Python, .NET, and Oniguruma.

       Perl's  regular expressions are described in its own documentation, and
       regular expressions in general are covered in a number of  books,  some
       of  which  have  copious  examples. Jeffrey Friedl's "Mastering Regular
       Expressions", published by  O'Reilly,  covers  regular  expressions  in
       great  detail.  This  description  of  PCRE2's  regular  expressions is
       intended as reference material.

       This document discusses the patterns that are supported by  PCRE2  when
       its  main  matching function, pcre2_match(), is used. PCRE2 also has an
       alternative matching function, pcre2_dfa_match(), which matches using a
       different  algorithm  that is not Perl-compatible. Some of the features
       discussed below are not available when DFA matching is used. The advan-
       tages and disadvantages of the alternative function, and how it differs
       from the normal function, are discussed in the pcre2matching page.


SPECIAL START-OF-PATTERN ITEMS

       A number of options that can be passed to pcre2_compile() can  also  be
       set by special items at the start of a pattern. These are not Perl-com-
       patible, but are provided to make these options accessible  to  pattern
       writers  who are not able to change the program that processes the pat-
       tern. Any number of these items  may  appear,  but  they  must  all  be
       together right at the start of the pattern string, and the letters must
       be in upper case.

   UTF support

       In the 8-bit and 16-bit PCRE2 libraries, characters may be coded either
       as single code units, or as multiple UTF-8 or UTF-16 code units. UTF-32
       can be specified for the 32-bit library, in which  case  it  constrains
       the  character  values  to  valid  Unicode  code points. To process UTF
       strings, PCRE2 must be built to include Unicode support (which  is  the
       default).  When  using  UTF  strings you must either call the compiling
       function with the PCRE2_UTF option, or the pattern must start with  the
       special  sequence  (*UTF),  which is equivalent to setting the relevant
       option. How setting a UTF mode affects pattern matching is mentioned in
       several  places  below.  There  is  also  a  summary of features in the
       pcre2unicode page.

       Some applications that allow their users to supply patterns may wish to
       restrict   them   to   non-UTF   data  for  security  reasons.  If  the
       PCRE2_NEVER_UTF option is passed  to  pcre2_compile(),  (*UTF)  is  not
       allowed, and its appearance in a pattern causes an error.

   Unicode property support

       Another  special  sequence that may appear at the start of a pattern is
       (*UCP).  This has the same effect as setting the PCRE2_UCP  option:  it
       causes  sequences such as \d and \w to use Unicode properties to deter-
       mine character types, instead of recognizing only characters with codes
       less than 256 via a lookup table.

       Some applications that allow their users to supply patterns may wish to
       restrict them for security reasons. If the  PCRE2_NEVER_UCP  option  is
       passed to pcre2_compile(), (*UCP) is not allowed, and its appearance in
       a pattern causes an error.

   Locking out empty string matching

       Starting a pattern with (*NOTEMPTY) or (*NOTEMPTY_ATSTART) has the same
       effect  as  passing the PCRE2_NOTEMPTY or PCRE2_NOTEMPTY_ATSTART option
       to whichever matching function is subsequently called to match the pat-
       tern.  These  options  lock  out  the matching of empty strings, either
       entirely, or only at the start of the subject.

   Disabling auto-possessification

       If a pattern starts with (*NO_AUTO_POSSESS), it has the same effect  as
       setting  the PCRE2_NO_AUTO_POSSESS option. This stops PCRE2 from making
       quantifiers possessive when what  follows  cannot  match  the  repeated
       item. For example, by default a+b is treated as a++b. For more details,
       see the pcre2api documentation.

   Disabling start-up optimizations

       If a pattern starts with (*NO_START_OPT), it has  the  same  effect  as
       setting the PCRE2_NO_START_OPTIMIZE option. This disables several opti-
       mizations for quickly reaching "no match" results.  For  more  details,
       see the pcre2api documentation.

   Disabling automatic anchoring

       If  a  pattern starts with (*NO_DOTSTAR_ANCHOR), it has the same effect
       as setting the PCRE2_NO_DOTSTAR_ANCHOR option. This disables  optimiza-
       tions that apply to patterns whose top-level branches all start with .*
       (match any number of arbitrary characters). For more details,  see  the
       pcre2api documentation.

   Disabling JIT compilation

       If  a  pattern  that starts with (*NO_JIT) is successfully compiled, an
       attempt by the application to apply the  JIT  optimization  by  calling
       pcre2_jit_compile() is ignored.

   Setting match resource limits

       The pcre2_match() function contains a counter that is incremented every
       time it goes round its main loop. The caller of pcre2_match() can set a
       limit  on  this counter, which therefore limits the amount of computing
       resource used for a match. The maximum depth of nested backtracking can
       also  be  limited;  this indirectly restricts the amount of heap memory
       that is used, but there is also an explicit memory limit  that  can  be
       set.

       These  facilities  are  provided to catch runaway matches that are pro-
       voked by patterns with huge matching trees (a typical example is a pat-
       tern  with  nested unlimited repeats applied to a long string that does
       not match). When one of these limits is reached, pcre2_match() gives an
       error  return.  The limits can also be set by items at the start of the
       pattern of the form

         (*LIMIT_HEAP=d)
         (*LIMIT_MATCH=d)
         (*LIMIT_DEPTH=d)

       where d is any number of decimal digits. However, the value of the set-
       ting  must  be  less than the value set (or defaulted) by the caller of
       pcre2_match() for it to have any effect. In other  words,  the  pattern
       writer  can lower the limits set by the programmer, but not raise them.
       If there is more than one setting of one of  these  limits,  the  lower
       value is used.

       Prior  to  release  10.30, LIMIT_DEPTH was called LIMIT_RECURSION. This
       name is still recognized for backwards compatibility.

       The heap limit applies only when the pcre2_match() interpreter is  used
       for matching. It does not apply to JIT or DFA matching. The match limit
       is used (but in a different way)  when  JIT  is  being  used,  or  when
       pcre2_dfa_match() is called, to limit computing resource usage by those
       matching functions. The depth limit is ignored by JIT but  is  relevant
       for  DFA  matching, which uses function recursion for recursions within
       the pattern. In this case, the depth limit controls the amount of  sys-
       tem stack that is used.

   Newline conventions

       PCRE2  supports six different conventions for indicating line breaks in
       strings: a single CR (carriage return) character, a  single  LF  (line-
       feed) character, the two-character sequence CRLF, any of the three pre-
       ceding, any Unicode newline sequence,  or  the  NUL  character  (binary
       zero).  The  pcre2api  page  has further discussion about newlines, and
       shows how to set the newline convention when calling pcre2_compile().

       It is also possible to specify a newline convention by starting a  pat-
       tern string with one of the following sequences:

         (*CR)        carriage return
         (*LF)        linefeed
         (*CRLF)      carriage return, followed by linefeed
         (*ANYCRLF)   any of the three above
         (*ANY)       all Unicode newline sequences
         (*NUL)       the NUL character (binary zero)

       These override the default and the options given to the compiling func-
       tion. For example, on a Unix system where LF  is  the  default  newline
       sequence, the pattern

         (*CR)a.b

       changes the convention to CR. That pattern matches "a\nb" because LF is
       no longer a newline. If more than one of these settings is present, the
       last one is used.

       The  newline  convention affects where the circumflex and dollar asser-
       tions are true. It also affects the interpretation of the dot metachar-
       acter  when  PCRE2_DOTALL is not set, and the behaviour of \N. However,
       it does not affect what the \R escape  sequence  matches.  By  default,
       this  is any Unicode newline sequence, for Perl compatibility. However,
       this can be changed; see the next section and the description of \R  in
       the  section entitled "Newline sequences" below. A change of \R setting
       can be combined with a change of newline convention.

   Specifying what \R matches

       It is possible to restrict \R to match only CR, LF, or CRLF (instead of
       the  complete  set  of  Unicode  line  endings)  by  setting the option
       PCRE2_BSR_ANYCRLF at compile time. This effect can also be achieved  by
       starting  a  pattern  with (*BSR_ANYCRLF). For completeness, (*BSR_UNI-
       CODE) is also recognized, corresponding to PCRE2_BSR_UNICODE.


EBCDIC CHARACTER CODES

       PCRE2 can be compiled to run in an environment that uses EBCDIC as  its
       character  code instead of ASCII or Unicode (typically a mainframe sys-
       tem). In the sections below, character code values are  ASCII  or  Uni-
       code; in an EBCDIC environment these characters may have different code
       values, and there are no code points greater than 255.


CHARACTERS AND METACHARACTERS

       A regular expression is a pattern that is  matched  against  a  subject
       string  from  left  to right. Most characters stand for themselves in a
       pattern, and match the corresponding characters in the  subject.  As  a
       trivial example, the pattern

         The quick brown fox

       matches a portion of a subject string that is identical to itself. When
       caseless matching is specified (the PCRE2_CASELESS option), letters are
       matched independently of case.

       The  power  of  regular  expressions  comes from the ability to include
       alternatives and repetitions in the pattern. These are encoded  in  the
       pattern by the use of metacharacters, which do not stand for themselves
       but instead are interpreted in some special way.

       There are two different sets of metacharacters: those that  are  recog-
       nized  anywhere in the pattern except within square brackets, and those
       that are recognized within square brackets.  Outside  square  brackets,
       the metacharacters are as follows:

         \      general escape character with several uses
         ^      assert start of string (or line, in multiline mode)
         $      assert end of string (or line, in multiline mode)
         .      match any character except newline (by default)
         [      start character class definition
         |      start of alternative branch
         (      start subpattern
         )      end subpattern
         ?      extends the meaning of (
                also 0 or 1 quantifier
                also quantifier minimizer
         *      0 or more quantifier
         +      1 or more quantifier
                also "possessive quantifier"
         {      start min/max quantifier

       Part  of  a  pattern  that is in square brackets is called a "character
       class". In a character class the only metacharacters are:

         \      general escape character
         ^      negate the class, but only if the first character
         -      indicates character range
         [      POSIX character class (only if followed by POSIX
                  syntax)
         ]      terminates the character class

       The following sections describe the use of each of the metacharacters.


BACKSLASH

       The backslash character has several uses. Firstly, if it is followed by
       a character that is not a number or a letter, it takes away any special
       meaning that character may have. This use of  backslash  as  an  escape
       character applies both inside and outside character classes.

       For  example,  if you want to match a * character, you must write \* in
       the pattern. This escaping action applies whether or not the  following
       character  would  otherwise be interpreted as a metacharacter, so it is
       always safe to precede a non-alphanumeric  with  backslash  to  specify
       that it stands for itself.  In particular, if you want to match a back-
       slash, you write \\.

       In a UTF mode, only ASCII numbers and letters have any special  meaning
       after  a  backslash.  All  other characters (in particular, those whose
       codepoints are greater than 127) are treated as literals.

       If a pattern is compiled with the  PCRE2_EXTENDED  option,  most  white
       space  in the pattern (other than in a character class), and characters
       between a # outside a character class and the next newline,  inclusive,
       are ignored. An escaping backslash can be used to include a white space
       or # character as part of the pattern.

       If you want to remove the special meaning from a  sequence  of  charac-
       ters,  you can do so by putting them between \Q and \E. This is differ-
       ent from Perl in that $ and  @  are  handled  as  literals  in  \Q...\E
       sequences  in PCRE2, whereas in Perl, $ and @ cause variable interpola-
       tion. Note the following examples:

         Pattern            PCRE2 matches   Perl matches

         \Qabc$xyz\E        abc$xyz        abc followed by the
                                             contents of $xyz
         \Qabc\$xyz\E       abc\$xyz       abc\$xyz
         \Qabc\E\$\Qxyz\E   abc$xyz        abc$xyz

       The \Q...\E sequence is recognized both inside  and  outside  character
       classes.   An  isolated \E that is not preceded by \Q is ignored. If \Q
       is not followed by \E later in the pattern, the literal  interpretation
       continues  to  the  end  of  the pattern (that is, \E is assumed at the
       end). If the isolated \Q is inside a character class,  this  causes  an
       error,  because  the  character  class  is  not terminated by a closing
       square bracket.

   Non-printing characters

       A second use of backslash provides a way of encoding non-printing char-
       acters  in patterns in a visible manner. There is no restriction on the
       appearance of non-printing characters in a pattern, but when a  pattern
       is being prepared by text editing, it is often easier to use one of the
       following escape sequences than the binary character it represents.  In
       an ASCII or Unicode environment, these escapes are as follows:

         \a        alarm, that is, the BEL character (hex 07)
         \cx       "control-x", where x is any printable ASCII character
         \e        escape (hex 1B)
         \f        form feed (hex 0C)
         \n        linefeed (hex 0A)
         \r        carriage return (hex 0D)
         \t        tab (hex 09)
         \0dd      character with octal code 0dd
         \ddd      character with octal code ddd, or back reference
         \o{ddd..} character with octal code ddd..
         \xhh      character with hex code hh
         \x{hhh..} character with hex code hhh.. (default mode)
         \uhhhh    character with hex code hhhh (when PCRE2_ALT_BSUX is set)

       The  precise effect of \cx on ASCII characters is as follows: if x is a
       lower case letter, it is converted to upper case. Then  bit  6  of  the
       character (hex 40) is inverted. Thus \cA to \cZ become hex 01 to hex 1A
       (A is 41, Z is 5A), but \c{ becomes hex 3B ({ is 7B), and  \c;  becomes
       hex  7B  (; is 3B). If the code unit following \c has a value less than
       32 or greater than 126, a compile-time error occurs.

       When PCRE2 is compiled in EBCDIC mode, \a, \e, \f, \n, \r, and \t  gen-
       erate the appropriate EBCDIC code values. The \c escape is processed as
       specified for Perl in the perlebcdic document. The only characters that
       are  allowed  after  \c are A-Z, a-z, or one of @, [, \, ], ^, _, or ?.
       Any other character provokes a compile-time  error.  The  sequence  \c@
       encodes  character code 0; after \c the letters (in either case) encode
       characters 1-26 (hex 01 to hex 1A); [, \, ], ^, and _ encode characters
       27-31  (hex  1B  to  hex 1F), and \c? becomes either 255 (hex FF) or 95
       (hex 5F).

       Thus, apart from \c?, these escapes generate the  same  character  code
       values  as  they do in an ASCII environment, though the meanings of the
       values mostly differ. For example, \cG always generates code  value  7,
       which is BEL in ASCII but DEL in EBCDIC.

       The  sequence  \c? generates DEL (127, hex 7F) in an ASCII environment,
       but because 127 is not a control character in  EBCDIC,  Perl  makes  it
       generate  the  APC character. Unfortunately, there are several variants
       of EBCDIC. In most of them the APC character has  the  value  255  (hex
       FF),  but  in  the one Perl calls POSIX-BC its value is 95 (hex 5F). If
       certain other characters have POSIX-BC values, PCRE2 makes \c? generate
       95; otherwise it generates 255.

       After  \0  up  to two further octal digits are read. If there are fewer
       than two digits, just  those  that  are  present  are  used.  Thus  the
       sequence \0\x\015 specifies two binary zeros followed by a CR character
       (code value 13). Make sure you supply two digits after the initial zero
       if the pattern character that follows is itself an octal digit.

       The  escape \o must be followed by a sequence of octal digits, enclosed
       in braces. An error occurs if this is not the case. This  escape  is  a
       recent  addition  to Perl; it provides way of specifying character code
       points as octal numbers greater than 0777, and  it  also  allows  octal
       numbers and back references to be unambiguously specified.

       For greater clarity and unambiguity, it is best to avoid following \ by
       a digit greater than zero. Instead, use \o{} or \x{} to specify charac-
       ter  numbers,  and \g{} to specify back references. The following para-
       graphs describe the old, ambiguous syntax.

       The handling of a backslash followed by a digit other than 0 is compli-
       cated, and Perl has changed over time, causing PCRE2 also to change.

       Outside a character class, PCRE2 reads the digit and any following dig-
       its as a decimal number. If the number is less than 10, begins with the
       digit  8  or  9,  or if there are at least that many previous capturing
       left parentheses in the expression, the entire sequence is taken  as  a
       back reference. A description of how this works is given later, follow-
       ing the discussion of  parenthesized  subpatterns.   Otherwise,  up  to
       three octal digits are read to form a character code.

       Inside  a character class, PCRE2 handles \8 and \9 as the literal char-
       acters "8" and "9", and otherwise reads up to three octal  digits  fol-
       lowing the backslash, using them to generate a data character. Any sub-
       sequent digits stand for themselves. For example, outside  a  character
       class:

         \040   is another way of writing an ASCII space
         \40    is the same, provided there are fewer than 40
                   previous capturing subpatterns
         \7     is always a back reference
         \11    might be a back reference, or another way of
                   writing a tab
         \011   is always a tab
         \0113  is a tab followed by the character "3"
         \113   might be a back reference, otherwise the
                   character with octal code 113
         \377   might be a back reference, otherwise
                   the value 255 (decimal)
         \81    is always a back reference

       Note  that octal values of 100 or greater that are specified using this
       syntax must not be introduced by a leading zero, because no  more  than
       three octal digits are ever read.

       By  default, after \x that is not followed by {, from zero to two hexa-
       decimal digits are read (letters can be in upper or  lower  case).  Any
       number of hexadecimal digits may appear between \x{ and }. If a charac-
       ter other than a hexadecimal digit appears between \x{  and  },  or  if
       there is no terminating }, an error occurs.

       If  the  PCRE2_ALT_BSUX  option  is set, the interpretation of \x is as
       just described only when it is followed by two hexadecimal digits. Oth-
       erwise,  it  matches a literal "x" character. In this mode, support for
       code points greater than 256 is provided by \u, which must be  followed
       by  four hexadecimal digits; otherwise it matches a literal "u" charac-
       ter.

       Characters whose value is less than 256 can be defined by either of the
       two syntaxes for \x (or by \u in PCRE2_ALT_BSUX mode). There is no dif-
       ference in the way they are handled. For example, \xdc is  exactly  the
       same as \x{dc} (or \u00dc in PCRE2_ALT_BSUX mode).

   Constraints on character values

       Characters  that  are  specified using octal or hexadecimal numbers are
       limited to certain values, as follows:

         8-bit non-UTF mode    no greater than 0xff
         16-bit non-UTF mode   no greater than 0xffff
         32-bit non-UTF mode   no greater than 0xffffffff
         All UTF modes         no greater than 0x10ffff and a valid codepoint

       Invalid Unicode codepoints are the range  0xd800  to  0xdfff  (the  so-
       called "surrogate" codepoints), and 0xffef.

   Escape sequences in character classes

       All the sequences that define a single character value can be used both
       inside and outside character classes. In addition, inside  a  character
       class, \b is interpreted as the backspace character (hex 08).

       \N  is not allowed in a character class. \B, \R, and \X are not special
       inside a character class. Like  other  unrecognized  alphabetic  escape
       sequences,  they  cause  an  error.  Outside  a  character class, these
       sequences have different meanings.

   Unsupported escape sequences

       In Perl, the sequences \l, \L, \u, and \U are recognized by its  string
       handler  and  used  to  modify  the  case  of  following characters. By
       default, PCRE2 does not support these escape sequences. However, if the
       PCRE2_ALT_BSUX option is set, \U matches a "U" character, and \u can be
       used to define a character by code point, as described above.

   Absolute and relative back references

       The sequence \g followed by a signed  or  unsigned  number,  optionally
       enclosed  in braces, is an absolute or relative back reference. A named
       back reference can be coded as \g{name}. Back references are  discussed
       later, following the discussion of parenthesized subpatterns.

   Absolute and relative subroutine calls

       For  compatibility with Oniguruma, the non-Perl syntax \g followed by a
       name or a number enclosed either in angle brackets or single quotes, is
       an  alternative  syntax for referencing a subpattern as a "subroutine".
       Details are discussed later.   Note  that  \g{...}  (Perl  syntax)  and
       \g<...>  (Oniguruma  syntax)  are  not synonymous. The former is a back
       reference; the latter is a subroutine call.

   Generic character types

       Another use of backslash is for specifying generic character types:

         \d     any decimal digit
         \D     any character that is not a decimal digit
         \h     any horizontal white space character
         \H     any character that is not a horizontal white space character
         \s     any white space character
         \S     any character that is not a white space character
         \v     any vertical white space character
         \V     any character that is not a vertical white space character
         \w     any "word" character
         \W     any "non-word" character

       There is also the single sequence \N, which matches a non-newline char-
       acter.   This is the same as the "." metacharacter when PCRE2_DOTALL is
       not set. Perl also uses \N to match characters by name; PCRE2 does  not
       support this.

       Each  pair of lower and upper case escape sequences partitions the com-
       plete set of characters into two disjoint  sets.  Any  given  character
       matches  one, and only one, of each pair. The sequences can appear both
       inside and outside character classes. They each match one character  of
       the  appropriate  type.  If the current matching point is at the end of
       the subject string, all of them fail, because there is no character  to
       match.

       The  default  \s  characters  are HT (9), LF (10), VT (11), FF (12), CR
       (13), and space (32), which are defined  as  white  space  in  the  "C"
       locale. This list may vary if locale-specific matching is taking place.
       For example, in some locales the "non-breaking space" character  (\xA0)
       is recognized as white space, and in others the VT character is not.

       A  "word"  character is an underscore or any character that is a letter
       or digit.  By default, the definition of letters  and  digits  is  con-
       trolled by PCRE2's low-valued character tables, and may vary if locale-
       specific matching is taking place (see "Locale support" in the pcre2api
       page).  For  example,  in  a French locale such as "fr_FR" in Unix-like
       systems, or "french" in Windows, some character codes greater than  127
       are  used  for  accented letters, and these are then matched by \w. The
       use of locales with Unicode is discouraged.

       By default, characters whose code points are  greater  than  127  never
       match \d, \s, or \w, and always match \D, \S, and \W, although this may
       be different for characters in the range 128-255  when  locale-specific
       matching  is  happening.   These escape sequences retain their original
       meanings from before Unicode support was available,  mainly  for  effi-
       ciency  reasons.  If  the  PCRE2_UCP  option  is  set, the behaviour is
       changed so that Unicode properties  are  used  to  determine  character
       types, as follows:

         \d  any character that matches \p{Nd} (decimal digit)
         \s  any character that matches \p{Z} or \h or \v
         \w  any character that matches \p{L} or \p{N}, plus underscore

       The  upper case escapes match the inverse sets of characters. Note that
       \d matches only decimal digits, whereas \w matches any  Unicode  digit,
       as well as any Unicode letter, and underscore. Note also that PCRE2_UCP
       affects \b, and \B because they are defined in  terms  of  \w  and  \W.
       Matching these sequences is noticeably slower when PCRE2_UCP is set.

       The  sequences  \h, \H, \v, and \V, in contrast to the other sequences,
       which match only ASCII characters by default, always match  a  specific
       list  of  code  points, whether or not PCRE2_UCP is set. The horizontal
       space characters are:

         U+0009     Horizontal tab (HT)
         U+0020     Space
         U+00A0     Non-break space
         U+1680     Ogham space mark
         U+180E     Mongolian vowel separator
         U+2000     En quad
         U+2001     Em quad
         U+2002     En space
         U+2003     Em space
         U+2004     Three-per-em space
         U+2005     Four-per-em space
         U+2006     Six-per-em space
         U+2007     Figure space
         U+2008     Punctuation space
         U+2009     Thin space
         U+200A     Hair space
         U+202F     Narrow no-break space
         U+205F     Medium mathematical space
         U+3000     Ideographic space

       The vertical space characters are:

         U+000A     Linefeed (LF)
         U+000B     Vertical tab (VT)
         U+000C     Form feed (FF)
         U+000D     Carriage return (CR)
         U+0085     Next line (NEL)
         U+2028     Line separator
         U+2029     Paragraph separator

       In 8-bit, non-UTF-8 mode, only the characters  with  code  points  less
       than 256 are relevant.

   Newline sequences

       Outside  a  character class, by default, the escape sequence \R matches
       any Unicode newline sequence. In 8-bit non-UTF-8 mode \R is  equivalent
       to the following:

         (?>\r\n|\n|\x0b|\f|\r|\x85)

       This  is  an  example  of an "atomic group", details of which are given
       below.  This particular group matches either the two-character sequence
       CR  followed  by  LF,  or  one  of  the single characters LF (linefeed,
       U+000A), VT (vertical tab, U+000B), FF (form feed,  U+000C),  CR  (car-
       riage  return,  U+000D), or NEL (next line, U+0085). Because this is an
       atomic group, the two-character sequence is treated as  a  single  unit
       that cannot be split.

       In  other modes, two additional characters whose codepoints are greater
       than 255 are added: LS (line separator, U+2028) and PS (paragraph sepa-
       rator,  U+2029).  Unicode support is not needed for these characters to
       be recognized.

       It is possible to restrict \R to match only CR, LF, or CRLF (instead of
       the  complete  set  of  Unicode  line  endings)  by  setting the option
       PCRE2_BSR_ANYCRLF at compile time. (BSR is an  abbrevation  for  "back-
       slash R".) This can be made the default when PCRE2 is built; if this is
       the case, the other behaviour can be requested via  the  PCRE2_BSR_UNI-
       CODE  option. It is also possible to specify these settings by starting
       a pattern string with one of the following sequences:

         (*BSR_ANYCRLF)   CR, LF, or CRLF only
         (*BSR_UNICODE)   any Unicode newline sequence

       These override the default and the options given to the compiling func-
       tion.  Note that these special settings, which are not Perl-compatible,
       are recognized only at the very start of a pattern, and that they  must
       be  in upper case. If more than one of them is present, the last one is
       used. They can be combined with a change  of  newline  convention;  for
       example, a pattern can start with:

         (*ANY)(*BSR_ANYCRLF)

       They  can also be combined with the (*UTF) or (*UCP) special sequences.
       Inside a character class, \R  is  treated  as  an  unrecognized  escape
       sequence, and causes an error.

   Unicode character properties

       When  PCRE2  is  built  with Unicode support (the default), three addi-
       tional escape sequences that match characters with specific  properties
       are  available.  In 8-bit non-UTF-8 mode, these sequences are of course
       limited to testing characters whose codepoints are less than  256,  but
       they  do work in this mode.  In 32-bit non-UTF mode, codepoints greater
       than 0x10ffff (the Unicode limit) may be  encountered.  These  are  all
       treated  as being in the Common script and with an unassigned type. The
       extra escape sequences are:

         \p{xx}   a character with the xx property
         \P{xx}   a character without the xx property
         \X       a Unicode extended grapheme cluster

       The property names represented by xx above are limited to  the  Unicode
       script names, the general category properties, "Any", which matches any
       character  (including  newline),  and  some  special  PCRE2  properties
       (described  in the next section).  Other Perl properties such as "InMu-
       sicalSymbols" are not supported by PCRE2.  Note that \P{Any}  does  not
       match any characters, so always causes a match failure.

       Sets of Unicode characters are defined as belonging to certain scripts.
       A character from one of these sets can be matched using a script  name.
       For example:

         \p{Greek}
         \P{Han}

       Those  that are not part of an identified script are lumped together as
       "Common". The current list of scripts is:

       Adlam, Ahom, Anatolian_Hieroglyphs, Arabic,  Armenian,  Avestan,  Bali-
       nese,  Bamum,  Bassa_Vah,  Batak, Bengali, Bhaiksuki, Bopomofo, Brahmi,
       Braille, Buginese, Buhid, Canadian_Aboriginal, Carian,  Caucasian_Alba-
       nian,  Chakma,  Cham,  Cherokee,  Common,  Coptic,  Cuneiform, Cypriot,
       Cyrillic, Deseret, Devanagari, Duployan, Egyptian_Hieroglyphs, Elbasan,
       Ethiopic,  Georgian, Glagolitic, Gothic, Grantha, Greek, Gujarati, Gur-
       mukhi, Han, Hangul, Hanunoo, Hatran,  Hebrew,  Hiragana,  Imperial_Ara-
       maic,    Inherited,    Inscriptional_Pahlavi,   Inscriptional_Parthian,
       Javanese, Kaithi, Kannada, Katakana, Kayah_Li, Kharoshthi, Khmer,  Kho-
       jki,  Khudawadi,  Lao,  Latin, Lepcha, Limbu, Linear_A, Linear_B, Lisu,
       Lycian, Lydian,  Mahajani,  Malayalam,  Mandaic,  Manichaean,  Marchen,
       Masaram_Gondi,     Meetei_Mayek,    Mende_Kikakui,    Meroitic_Cursive,
       Meroitic_Hieroglyphs, Miao, Modi,  Mongolian,  Mro,  Multani,  Myanmar,
       Nabataean,  New_Tai_Lue, Newa, Nko, Nushu, Ogham, Ol_Chiki, Old_Hungar-
       ian,   Old_Italic,    Old_North_Arabian,    Old_Permic,    Old_Persian,
       Old_South_Arabian,  Old_Turkic,  Oriya,  Osage,  Osmanya, Pahawh_Hmong,
       Palmyrene, Pau_Cin_Hau, Phags_Pa, Phoenician, Psalter_Pahlavi,  Rejang,
       Runic,  Samaritan,  Saurashtra, Sharada, Shavian, Siddham, SignWriting,
       Sinhala, Sora_Sompeng, Soyombo, Sundanese, Syloti_Nagri, Syriac,  Taga-
       log,  Tagbanwa,  Tai_Le, Tai_Tham, Tai_Viet, Takri, Tamil, Tangut, Tel-
       ugu,  Thaana,  Thai,  Tibetan,  Tifinagh,   Tirhuta,   Ugaritic,   Vai,
       Warang_Citi, Yi, Zanabazar_Square.

       Each character has exactly one Unicode general category property, spec-
       ified by a two-letter abbreviation. For compatibility with Perl,  nega-
       tion  can  be  specified  by including a circumflex between the opening
       brace and the property name.  For  example,  \p{^Lu}  is  the  same  as
       \P{Lu}.

       If only one letter is specified with \p or \P, it includes all the gen-
       eral category properties that start with that letter. In this case,  in
       the  absence of negation, the curly brackets in the escape sequence are
       optional; these two examples have the same effect:

         \p{L}
         \pL

       The following general category property codes are supported:

         C     Other
         Cc    Control
         Cf    Format
         Cn    Unassigned
         Co    Private use
         Cs    Surrogate

         L     Letter
         Ll    Lower case letter
         Lm    Modifier letter
         Lo    Other letter
         Lt    Title case letter
         Lu    Upper case letter

         M     Mark
         Mc    Spacing mark
         Me    Enclosing mark
         Mn    Non-spacing mark

         N     Number
         Nd    Decimal number
         Nl    Letter number
         No    Other number

         P     Punctuation
         Pc    Connector punctuation
         Pd    Dash punctuation
         Pe    Close punctuation
         Pf    Final punctuation
         Pi    Initial punctuation
         Po    Other punctuation
         Ps    Open punctuation

         S     Symbol
         Sc    Currency symbol
         Sk    Modifier symbol
         Sm    Mathematical symbol
         So    Other symbol

         Z     Separator
         Zl    Line separator
         Zp    Paragraph separator
         Zs    Space separator

       The special property L& is also supported: it matches a character  that
       has  the  Lu,  Ll, or Lt property, in other words, a letter that is not
       classified as a modifier or "other".

       The Cs (Surrogate) property applies only to  characters  in  the  range
       U+D800  to U+DFFF. Such characters are not valid in Unicode strings and
       so cannot be tested by PCRE2, unless UTF  validity  checking  has  been
       turned  off  (see  the discussion of PCRE2_NO_UTF_CHECK in the pcre2api
       page). Perl does not support the Cs property.

       The long synonyms for  property  names  that  Perl  supports  (such  as
       \p{Letter})  are  not supported by PCRE2, nor is it permitted to prefix
       any of these properties with "Is".

       No character that is in the Unicode table has the Cn (unassigned) prop-
       erty.  Instead, this property is assumed for any code point that is not
       in the Unicode table.

       Specifying caseless matching does not affect  these  escape  sequences.
       For  example,  \p{Lu}  always  matches only upper case letters. This is
       different from the behaviour of current versions of Perl.

       Matching characters by Unicode property is not fast, because PCRE2  has
       to  do  a  multistage table lookup in order to find a character's prop-
       erty. That is why the traditional escape sequences such as \d and \w do
       not  use  Unicode  properties  in PCRE2 by default, though you can make
       them do so by setting the PCRE2_UCP option or by starting  the  pattern
       with (*UCP).

   Extended grapheme clusters

       The  \X  escape  matches  any number of Unicode characters that form an
       "extended grapheme cluster", and treats the sequence as an atomic group
       (see  below).  Unicode supports various kinds of composite character by
       giving each character a grapheme breaking property,  and  having  rules
       that use these properties to define the boundaries of extended grapheme
       clusters. The rules are defined in Unicode Standard Annex 29,  "Unicode
       Text Segmentation".

       \X  always  matches  at least one character. Then it decides whether to
       add additional characters according to the following rules for ending a
       cluster:

       1. End at the end of the subject string.

       2.  Do not end between CR and LF; otherwise end after any control char-
       acter.

       3. Do not break Hangul (a Korean  script)  syllable  sequences.  Hangul
       characters  are of five types: L, V, T, LV, and LVT. An L character may
       be followed by an L, V, LV, or LVT character; an LV or V character  may
       be followed by a V or T character; an LVT or T character may be follwed
       only by a T character.

       4. Do not end before extending  characters  or  spacing  marks  or  the
       "zero-width  joiner"  characters.  Characters  with the "mark" property
       always have the "extend" grapheme breaking property.

       5. Do not end after prepend characters.

       6. Do not break within emoji modifier sequences (a base character  fol-
       lowed by a modifier). Extending characters are allowed before the modi-
       fier.

       7. Do not break within emoji zwj sequences (zero-width jointer followed
       by "glue after ZWJ" or "base glue after ZWJ").

       8.  Do  not  break  within  emoji flag sequences. That is, do not break
       between regional indicator (RI) characters if there are an  odd  number
       of RI characters before the break point.

       6. Otherwise, end the cluster.

   PCRE2's additional properties

       As  well as the standard Unicode properties described above, PCRE2 sup-
       ports four more that make it possible  to  convert  traditional  escape
       sequences such as \w and \s to use Unicode properties. PCRE2 uses these
       non-standard, non-Perl properties internally  when  PCRE2_UCP  is  set.
       However, they may also be used explicitly. These properties are:

         Xan   Any alphanumeric character
         Xps   Any POSIX space character
         Xsp   Any Perl space character
         Xwd   Any Perl "word" character

       Xan  matches  characters that have either the L (letter) or the N (num-
       ber) property. Xps matches the characters tab, linefeed, vertical  tab,
       form  feed,  or carriage return, and any other character that has the Z
       (separator) property.  Xsp is the same as Xps;  in  PCRE1  it  used  to
       exclude  vertical  tab,  for  Perl compatibility, but Perl changed. Xwd
       matches the same characters as Xan, plus underscore.

       There is another non-standard property, Xuc, which matches any  charac-
       ter  that  can  be represented by a Universal Character Name in C++ and
       other programming languages. These are the characters $,  @,  `  (grave
       accent),  and  all  characters with Unicode code points greater than or
       equal to U+00A0, except for the surrogates U+D800 to U+DFFF. Note  that
       most  base  (ASCII) characters are excluded. (Universal Character Names
       are of the form \uHHHH or \UHHHHHHHH where H is  a  hexadecimal  digit.
       Note that the Xuc property does not match these sequences but the char-
       acters that they represent.)

   Resetting the match start

       The escape sequence \K causes any previously matched characters not  to
       be included in the final matched sequence. For example, the pattern:

         foo\Kbar

       matches  "foobar",  but reports that it has matched "bar". This feature
       is similar to a lookbehind assertion (described  below).   However,  in
       this  case, the part of the subject before the real match does not have
       to be of fixed length, as lookbehind assertions do. The use of \K  does
       not  interfere  with  the setting of captured substrings.  For example,
       when the pattern

         (foo)\Kbar

       matches "foobar", the first substring is still set to "foo".

       Perl documents that the use  of  \K  within  assertions  is  "not  well
       defined".  In  PCRE2,  \K  is acted upon when it occurs inside positive
       assertions, but is ignored in negative assertions.  Note  that  when  a
       pattern  such  as (?=ab\K) matches, the reported start of the match can
       be greater than the end of the match.

   Simple assertions

       The final use of backslash is for certain simple assertions. An  asser-
       tion  specifies a condition that has to be met at a particular point in
       a match, without consuming any characters from the subject string.  The
       use  of subpatterns for more complicated assertions is described below.
       The backslashed assertions are:

         \b     matches at a word boundary
         \B     matches when not at a word boundary
         \A     matches at the start of the subject
         \Z     matches at the end of the subject
                 also matches before a newline at the end of the subject
         \z     matches only at the end of the subject
         \G     matches at the first matching position in the subject

       Inside a character class, \b has a different meaning;  it  matches  the
       backspace  character.  If  any  other  of these assertions appears in a
       character class, an "invalid escape sequence" error is generated.

       A word boundary is a position in the subject string where  the  current
       character  and  the previous character do not both match \w or \W (i.e.
       one matches \w and the other matches \W), or the start or  end  of  the
       string  if  the  first or last character matches \w, respectively. In a
       UTF mode, the meanings of \w and \W  can  be  changed  by  setting  the
       PCRE2_UCP option. When this is done, it also affects \b and \B. Neither
       PCRE2 nor Perl has a separate "start of word" or "end of word"  metase-
       quence.  However,  whatever follows \b normally determines which it is.
       For example, the fragment \ba matches "a" at the start of a word.

       The \A, \Z, and \z assertions differ from  the  traditional  circumflex
       and dollar (described in the next section) in that they only ever match
       at the very start and end of the subject string, whatever  options  are
       set.  Thus,  they are independent of multiline mode. These three asser-
       tions are not affected by the  PCRE2_NOTBOL  or  PCRE2_NOTEOL  options,
       which  affect only the behaviour of the circumflex and dollar metachar-
       acters. However, if the startoffset argument of pcre2_match()  is  non-
       zero,  indicating  that  matching is to start at a point other than the
       beginning of the subject, \A can never match.  The  difference  between
       \Z  and \z is that \Z matches before a newline at the end of the string
       as well as at the very end, whereas \z matches only at the end.

       The \G assertion is true only when the current matching position is  at
       the  start point of the match, as specified by the startoffset argument
       of pcre2_match(). It differs from \A when the value of  startoffset  is
       non-zero.  By  calling  pcre2_match()  multiple  times with appropriate
       arguments, you can mimic Perl's /g option, and it is in  this  kind  of
       implementation where \G can be useful.

       Note,  however,  that PCRE2's interpretation of \G, as the start of the
       current match, is subtly different from Perl's, which defines it as the
       end  of  the  previous  match. In Perl, these can be different when the
       previously matched string was empty. Because PCRE2 does just one  match
       at a time, it cannot reproduce this behaviour.

       If  all  the alternatives of a pattern begin with \G, the expression is
       anchored to the starting match position, and the "anchored" flag is set
       in the compiled regular expression.


CIRCUMFLEX AND DOLLAR

       The  circumflex  and  dollar  metacharacters are zero-width assertions.
       That is, they test for a particular condition being true  without  con-
       suming any characters from the subject string. These two metacharacters
       are concerned with matching the starts and ends of lines. If  the  new-
       line  convention is set so that only the two-character sequence CRLF is
       recognized as a newline, isolated CR and LF characters are  treated  as
       ordinary data characters, and are not recognized as newlines.

       Outside a character class, in the default matching mode, the circumflex
       character is an assertion that is true only  if  the  current  matching
       point  is  at the start of the subject string. If the startoffset argu-
       ment of pcre2_match() is non-zero, or if PCRE2_NOTBOL is  set,  circum-
       flex  can  never match if the PCRE2_MULTILINE option is unset. Inside a
       character class, circumflex has  an  entirely  different  meaning  (see
       below).

       Circumflex  need  not be the first character of the pattern if a number
       of alternatives are involved, but it should be the first thing in  each
       alternative  in  which  it appears if the pattern is ever to match that
       branch. If all possible alternatives start with a circumflex, that  is,
       if  the  pattern  is constrained to match only at the start of the sub-
       ject, it is said to be an "anchored" pattern.  (There  are  also  other
       constructs that can cause a pattern to be anchored.)

       The  dollar  character is an assertion that is true only if the current
       matching point is at the end of  the  subject  string,  or  immediately
       before  a  newline  at  the  end  of  the  string  (by default), unless
       PCRE2_NOTEOL is set. Note, however, that it does not actually match the
       newline. Dollar need not be the last character of the pattern if a num-
       ber of alternatives are involved, but it should be the last item in any
       branch  in which it appears. Dollar has no special meaning in a charac-
       ter class.

       The meaning of dollar can be changed so that it  matches  only  at  the
       very  end  of the string, by setting the PCRE2_DOLLAR_ENDONLY option at
       compile time. This does not affect the \Z assertion.

       The meanings of the circumflex and dollar metacharacters are changed if
       the  PCRE2_MULTILINE  option  is  set.  When this is the case, a dollar
       character matches before any newlines in the string, as well as at  the
       very  end, and a circumflex matches immediately after internal newlines
       as well as at the start of the subject string. It does not match  after
       a  newline  that ends the string, for compatibility with Perl. However,
       this can be changed by setting the PCRE2_ALT_CIRCUMFLEX option.

       For example, the pattern /^abc$/ matches the subject string  "def\nabc"
       (where  \n  represents a newline) in multiline mode, but not otherwise.
       Consequently, patterns that are anchored in single  line  mode  because
       all  branches  start  with  ^ are not anchored in multiline mode, and a
       match for circumflex is  possible  when  the  startoffset  argument  of
       pcre2_match()  is  non-zero. The PCRE2_DOLLAR_ENDONLY option is ignored
       if PCRE2_MULTILINE is set.

       When the newline convention (see "Newline  conventions"  below)  recog-
       nizes  the two-character sequence CRLF as a newline, this is preferred,
       even if the single characters CR and LF are  also  recognized  as  new-
       lines.  For  example,  if  the newline convention is "any", a multiline
       mode circumflex matches before "xyz" in the string "abc\r\nxyz"  rather
       than  after  CR, even though CR on its own is a valid newline. (It also
       matches at the very start of the string, of course.)

       Note that the sequences \A, \Z, and \z can be used to match  the  start
       and  end of the subject in both modes, and if all branches of a pattern
       start with \A it is always anchored, whether or not PCRE2_MULTILINE  is
       set.


FULL STOP (PERIOD, DOT) AND \N

       Outside a character class, a dot in the pattern matches any one charac-
       ter in the subject string except (by default) a character  that  signi-
       fies the end of a line.

       When  a line ending is defined as a single character, dot never matches
       that character; when the two-character sequence CRLF is used, dot  does
       not  match  CR  if  it  is immediately followed by LF, but otherwise it
       matches all characters (including isolated CRs and LFs). When any  Uni-
       code  line endings are being recognized, dot does not match CR or LF or
       any of the other line ending characters.

       The behaviour of dot with regard to newlines can  be  changed.  If  the
       PCRE2_DOTALL  option  is  set, a dot matches any one character, without
       exception.  If the two-character sequence CRLF is present in  the  sub-
       ject string, it takes two dots to match it.

       The  handling of dot is entirely independent of the handling of circum-
       flex and dollar, the only relationship being  that  they  both  involve
       newlines. Dot has no special meaning in a character class.

       The  escape  sequence  \N  behaves  like  a  dot, except that it is not
       affected by the PCRE2_DOTALL option. In other  words,  it  matches  any
       character  except  one that signifies the end of a line. Perl also uses
       \N to match characters by name; PCRE2 does not support this.


MATCHING A SINGLE CODE UNIT

       Outside a character class, the escape sequence \C matches any one  code
       unit,  whether or not a UTF mode is set. In the 8-bit library, one code
       unit is one byte; in the 16-bit library it is a  16-bit  unit;  in  the
       32-bit  library  it  is  a 32-bit unit. Unlike a dot, \C always matches
       line-ending characters. The feature is provided in  Perl  in  order  to
       match individual bytes in UTF-8 mode, but it is unclear how it can use-
       fully be used.

       Because \C breaks up characters into individual  code  units,  matching
       one  unit  with  \C  in UTF-8 or UTF-16 mode means that the rest of the
       string may start with a malformed UTF  character.  This  has  undefined
       results, because PCRE2 assumes that it is matching character by charac-
       ter in a valid UTF string (by default it checks  the  subject  string's
       validity  at  the  start  of  processing  unless the PCRE2_NO_UTF_CHECK
       option is used).

       An  application  can  lock  out  the  use  of   \C   by   setting   the
       PCRE2_NEVER_BACKSLASH_C  option  when  compiling  a pattern. It is also
       possible to build PCRE2 with the use of \C permanently disabled.

       PCRE2 does not allow \C to appear in lookbehind  assertions  (described
       below)  in UTF-8 or UTF-16 modes, because this would make it impossible
       to calculate the length of  the  lookbehind.  Neither  the  alternative
       matching function pcre2_dfa_match() nor the JIT optimizer support \C in
       these UTF modes.  The former gives a match-time error; the latter fails
       to optimize and so the match is always run using the interpreter.

       In  the  32-bit  library,  however,  \C  is  always supported (when not
       explicitly locked out) because it always matches a  single  code  unit,
       whether or not UTF-32 is specified.

       In general, the \C escape sequence is best avoided. However, one way of
       using it that avoids the problem of malformed UTF-8 or  UTF-16  charac-
       ters  is  to use a lookahead to check the length of the next character,
       as in this pattern, which could be used with  a  UTF-8  string  (ignore
       white space and line breaks):

         (?| (?=[\x00-\x7f])(\C) |
             (?=[\x80-\x{7ff}])(\C)(\C) |
             (?=[\x{800}-\x{ffff}])(\C)(\C)(\C) |
             (?=[\x{10000}-\x{1fffff}])(\C)(\C)(\C)(\C))

       In  this  example,  a  group  that starts with (?| resets the capturing
       parentheses numbers in each alternative (see "Duplicate Subpattern Num-
       bers" below). The assertions at the start of each branch check the next
       UTF-8 character for values whose encoding uses 1, 2,  3,  or  4  bytes,
       respectively. The character's individual bytes are then captured by the
       appropriate number of \C groups.


SQUARE BRACKETS AND CHARACTER CLASSES

       An opening square bracket introduces a character class, terminated by a
       closing square bracket. A closing square bracket on its own is not spe-
       cial by default.  If a closing square bracket is required as  a  member
       of the class, it should be the first data character in the class (after
       an initial circumflex, if present) or escaped with  a  backslash.  This
       means  that,  by default, an empty class cannot be defined. However, if
       the PCRE2_ALLOW_EMPTY_CLASS option is set, a closing square bracket  at
       the start does end the (empty) class.

       A  character class matches a single character in the subject. A matched
       character must be in the set of characters defined by the class, unless
       the  first  character in the class definition is a circumflex, in which
       case the subject character must not be in the set defined by the class.
       If  a  circumflex is actually required as a member of the class, ensure
       it is not the first character, or escape it with a backslash.

       For example, the character class [aeiou] matches any lower case  vowel,
       while  [^aeiou]  matches  any character that is not a lower case vowel.
       Note that a circumflex is just a convenient notation for specifying the
       characters  that  are in the class by enumerating those that are not. A
       class that starts with a circumflex is not an assertion; it still  con-
       sumes  a  character  from the subject string, and therefore it fails if
       the current pointer is at the end of the string.

       When caseless matching is set, any letters in a  class  represent  both
       their  upper  case  and lower case versions, so for example, a caseless
       [aeiou] matches "A" as well as "a", and a caseless  [^aeiou]  does  not
       match "A", whereas a caseful version would.

       Characters  that  might  indicate  line breaks are never treated in any
       special way  when  matching  character  classes,  whatever  line-ending
       sequence  is  in  use,  and  whatever  setting  of the PCRE2_DOTALL and
       PCRE2_MULTILINE options is used. A class such as  [^a]  always  matches
       one of these characters.

       The  character escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, \V,
       \w, and \W may appear in a character class, and add the characters that
       they  match to the class. For example, [\dABCDEF] matches any hexadeci-
       mal digit. In UTF modes, the PCRE2_UCP option affects the  meanings  of
       \d,  \s,  \w  and  their upper case partners, just as it does when they
       appear outside a character class, as described in the section  entitled
       "Generic character types" above. The escape sequence \b has a different
       meaning inside a character class; it matches the  backspace  character.
       The  sequences  \B,  \N,  \R, and \X are not special inside a character
       class. Like any other unrecognized  escape  sequences,  they  cause  an
       error.

       The  minus (hyphen) character can be used to specify a range of charac-
       ters in a character  class.  For  example,  [d-m]  matches  any  letter
       between  d  and  m,  inclusive.  If  a minus character is required in a
       class, it must be escaped with a backslash  or  appear  in  a  position
       where  it cannot be interpreted as indicating a range, typically as the
       first or last character in the class, or immediately after a range. For
       example,  [b-d-z] matches letters in the range b to d, a hyphen charac-
       ter, or z.

       Perl treats a hyphen as a literal if it appears before or after a POSIX
       class (see below) or a character type escape such as as \d, but gives a
       warning in its warning mode, as this is most likely a  user  error.  As
       PCRE2 has no facility for warning, an error is given in these cases.

       It is not possible to have the literal character "]" as the end charac-
       ter of a range. A pattern such as [W-]46] is interpreted as a class  of
       two  characters ("W" and "-") followed by a literal string "46]", so it
       would match "W46]" or "-46]". However, if the "]"  is  escaped  with  a
       backslash  it is interpreted as the end of range, so [W-\]46] is inter-
       preted as a class containing a range followed by two other  characters.
       The  octal or hexadecimal representation of "]" can also be used to end
       a range.

       Ranges normally include all code points between the start and end char-
       acters,  inclusive.  They  can  also  be used for code points specified
       numerically, for example [\000-\037]. Ranges can include any characters
       that are valid for the current mode.

       There  is  a  special  case in EBCDIC environments for ranges whose end
       points are both specified as literal letters in the same case. For com-
       patibility  with Perl, EBCDIC code points within the range that are not
       letters are omitted. For example, [h-k] matches only  four  characters,
       even though the codes for h and k are 0x88 and 0x92, a range of 11 code
       points. However, if the range is specified  numerically,  for  example,
       [\x88-\x92] or [h-\x92], all code points are included.

       If a range that includes letters is used when caseless matching is set,
       it matches the letters in either case. For example, [W-c] is equivalent
       to  [][\\^_`wxyzabc],  matched  caselessly,  and  in a non-UTF mode, if
       character tables for a French locale are in  use,  [\xc8-\xcb]  matches
       accented E characters in both cases.

       A  circumflex  can  conveniently  be used with the upper case character
       types to specify a more restricted set of characters than the  matching
       lower  case  type.  For example, the class [^\W_] matches any letter or
       digit, but not underscore, whereas [\w] includes underscore. A positive
       character class should be read as "something OR something OR ..." and a
       negative class as "NOT something AND NOT something AND NOT ...".

       The only metacharacters that are recognized in  character  classes  are
       backslash,  hyphen  (only  where  it can be interpreted as specifying a
       range), circumflex (only at the start), opening  square  bracket  (only
       when  it can be interpreted as introducing a POSIX class name, or for a
       special compatibility feature - see the next  two  sections),  and  the
       terminating  closing  square  bracket.  However,  escaping  other  non-
       alphanumeric characters does no harm.


POSIX CHARACTER CLASSES

       Perl supports the POSIX notation for character classes. This uses names
       enclosed  by [: and :] within the enclosing square brackets. PCRE2 also
       supports this notation. For example,

         [01[:alpha:]%]

       matches "0", "1", any alphabetic character, or "%". The supported class
       names are:

         alnum    letters and digits
         alpha    letters
         ascii    character codes 0 - 127
         blank    space or tab only
         cntrl    control characters
         digit    decimal digits (same as \d)
         graph    printing characters, excluding space
         lower    lower case letters
         print    printing characters, including space
         punct    printing characters, excluding letters and digits and space
         space    white space (the same as \s from PCRE2 8.34)
         upper    upper case letters
         word     "word" characters (same as \w)
         xdigit   hexadecimal digits

       The  default  "space" characters are HT (9), LF (10), VT (11), FF (12),
       CR (13), and space (32). If locale-specific matching is  taking  place,
       the  list  of  space characters may be different; there may be fewer or
       more of them. "Space" and \s match the same set of characters.

       The name "word" is a Perl extension, and "blank"  is  a  GNU  extension
       from  Perl  5.8. Another Perl extension is negation, which is indicated
       by a ^ character after the colon. For example,

         [12[:^digit:]]

       matches "1", "2", or any non-digit. PCRE2 (and Perl) also recognize the
       POSIX syntax [.ch.] and [=ch=] where "ch" is a "collating element", but
       these are not supported, and an error is given if they are encountered.

       By default, characters with values greater than 127 do not match any of
       the POSIX character classes, although this may be different for charac-
       ters in the range 128-255 when locale-specific matching  is  happening.
       However,  if the PCRE2_UCP option is passed to pcre2_compile(), some of
       the classes are changed so that Unicode character properties are  used.
       This  is  achieved  by  replacing  certain  POSIX  classes  with  other
       sequences, as follows:

         [:alnum:]  becomes  \p{Xan}
         [:alpha:]  becomes  \p{L}
         [:blank:]  becomes  \h
         [:cntrl:]  becomes  \p{Cc}
         [:digit:]  becomes  \p{Nd}
         [:lower:]  becomes  \p{Ll}
         [:space:]  becomes  \p{Xps}
         [:upper:]  becomes  \p{Lu}
         [:word:]   becomes  \p{Xwd}

       Negated versions, such as [:^alpha:] use \P instead of \p. Three  other
       POSIX classes are handled specially in UCP mode:

       [:graph:] This  matches  characters that have glyphs that mark the page
                 when printed. In Unicode property terms, it matches all char-
                 acters with the L, M, N, P, S, or Cf properties, except for:

                   U+061C           Arabic Letter Mark
                   U+180E           Mongolian Vowel Separator
                   U+2066 - U+2069  Various "isolate"s


       [:print:] This  matches  the  same  characters  as [:graph:] plus space
                 characters that are not controls, that  is,  characters  with
                 the Zs property.

       [:punct:] This matches all characters that have the Unicode P (punctua-
                 tion) property, plus those characters with code  points  less
                 than 256 that have the S (Symbol) property.

       The  other  POSIX classes are unchanged, and match only characters with
       code points less than 256.


COMPATIBILITY FEATURE FOR WORD BOUNDARIES

       In the POSIX.2 compliant library that was included in 4.4BSD Unix,  the
       ugly  syntax  [[:<:]]  and [[:>:]] is used for matching "start of word"
       and "end of word". PCRE2 treats these items as follows:

         [[:<:]]  is converted to  \b(?=\w)
         [[:>:]]  is converted to  \b(?<=\w)

       Only these exact character sequences are recognized. A sequence such as
       [a[:<:]b]  provokes  error  for  an unrecognized POSIX class name. This
       support is not compatible with Perl. It is provided to help  migrations
       from other environments, and is best not used in any new patterns. Note
       that \b matches at the start and the end of a word (see "Simple  asser-
       tions"  above),  and in a Perl-style pattern the preceding or following
       character normally shows which is wanted,  without  the  need  for  the
       assertions  that  are used above in order to give exactly the POSIX be-
       haviour.


VERTICAL BAR

       Vertical bar characters are used to separate alternative patterns.  For
       example, the pattern

         gilbert|sullivan

       matches  either "gilbert" or "sullivan". Any number of alternatives may
       appear, and an empty  alternative  is  permitted  (matching  the  empty
       string). The matching process tries each alternative in turn, from left
       to right, and the first one that succeeds is used. If the  alternatives
       are  within a subpattern (defined below), "succeeds" means matching the
       rest of the main pattern as well as the alternative in the subpattern.


INTERNAL OPTION SETTING

       The settings  of  the  PCRE2_CASELESS,  PCRE2_MULTILINE,  PCRE2_DOTALL,
       PCRE2_EXTENDED,  PCRE2_EXTENDED_MORE, and PCRE2_NO_AUTO_CAPTURE options
       (which are Perl-compatible) can be changed from within the pattern by a
       sequence  of  Perl  option  letters  enclosed between "(?" and ")". The
       option letters are

         i  for PCRE2_CASELESS
         m  for PCRE2_MULTILINE
         n  for PCRE2_NO_AUTO_CAPTURE
         s  for PCRE2_DOTALL
         x  for PCRE2_EXTENDED
         xx for PCRE2_EXTENDED_MORE

       For example, (?im) sets caseless, multiline matching. It is also possi-
       ble  to  unset these options by preceding the letter with a hyphen. The
       two "extended" options are not independent; unsetting either  one  can-
       cels the effects of both of them.

       A   combined  setting  and  unsetting  such  as  (?im-sx),  which  sets
       PCRE2_CASELESS and PCRE2_MULTILINE  while  unsetting  PCRE2_DOTALL  and
       PCRE2_EXTENDED,  is also permitted. If a letter appears both before and
       after the hyphen, the option is unset. An empty options  setting  "(?)"
       is allowed. Needless to say, it has no effect.

       The  PCRE2-specific  options  PCRE2_DUPNAMES  and PCRE2_UNGREEDY can be
       changed in the same way as the Perl-compatible  options  by  using  the
       characters J and U respectively.

       When  one  of  these  option  changes occurs at top level (that is, not
       inside subpattern parentheses), the change applies to the remainder  of
       the  pattern  that  follows.  An option change within a subpattern (see
       below for a description of subpatterns) affects only that part  of  the
       subpattern that follows it, so

         (a(?i)b)c

       matches  abc  and  aBc and no other strings (assuming PCRE2_CASELESS is
       not used).  By this means, options can be made to have  different  set-
       tings in different parts of the pattern. Any changes made in one alter-
       native do carry on into subsequent branches within the same subpattern.
       For example,

         (a(?i)b|c)

       matches  "ab",  "aB",  "c",  and "C", even though when matching "C" the
       first branch is abandoned before the option setting.  This  is  because
       the  effects  of option settings happen at compile time. There would be
       some very weird behaviour otherwise.

       As a convenient shorthand, if any option settings are required  at  the
       start  of a non-capturing subpattern (see the next section), the option
       letters may appear between the "?" and the ":". Thus the two patterns

         (?i:saturday|sunday)
         (?:(?i)saturday|sunday)

       match exactly the same set of strings.

       Note: There are other PCRE2-specific options that can  be  set  by  the
       application when the compiling function is called. The pattern can con-
       tain special leading sequences such as (*CRLF)  to  override  what  the
       application  has  set  or what has been defaulted. Details are given in
       the section entitled "Newline sequences"  above.  There  are  also  the
       (*UTF)  and  (*UCP)  leading  sequences that can be used to set UTF and
       Unicode property modes; they are equivalent to  setting  the  PCRE2_UTF
       and  PCRE2_UCP  options, respectively. However, the application can set
       the PCRE2_NEVER_UTF and PCRE2_NEVER_UCP options, which lock out the use
       of the (*UTF) and (*UCP) sequences.


SUBPATTERNS

       Subpatterns are delimited by parentheses (round brackets), which can be
       nested.  Turning part of a pattern into a subpattern does two things:

       1. It localizes a set of alternatives. For example, the pattern

         cat(aract|erpillar|)

       matches "cataract", "caterpillar", or "cat". Without  the  parentheses,
       it would match "cataract", "erpillar" or an empty string.

       2.  It  sets  up  the  subpattern as a capturing subpattern. This means
       that, when the whole pattern matches, the portion of the subject string
       that  matched  the  subpattern is passed back to the caller, separately
       from the portion that matched the whole pattern. (This applies only  to
       the  traditional  matching function; the DFA matching function does not
       support capturing.)

       Opening parentheses are counted from left to right (starting from 1) to
       obtain  numbers  for  the  capturing  subpatterns.  For example, if the
       string "the red king" is matched against the pattern

         the ((red|white) (king|queen))

       the captured substrings are "red king", "red", and "king", and are num-
       bered 1, 2, and 3, respectively.

       The  fact  that  plain  parentheses  fulfil two functions is not always
       helpful.  There are often times when a grouping subpattern is  required
       without  a capturing requirement. If an opening parenthesis is followed
       by a question mark and a colon, the subpattern does not do any  captur-
       ing,  and  is  not  counted when computing the number of any subsequent
       capturing subpatterns. For example, if the string "the white queen"  is
       matched against the pattern

         the ((?:red|white) (king|queen))

       the captured substrings are "white queen" and "queen", and are numbered
       1 and 2. The maximum number of capturing subpatterns is 65535.

       As a convenient shorthand, if any option settings are required  at  the
       start  of  a  non-capturing  subpattern,  the option letters may appear
       between the "?" and the ":". Thus the two patterns

         (?i:saturday|sunday)
         (?:(?i)saturday|sunday)

       match exactly the same set of strings. Because alternative branches are
       tried  from  left  to right, and options are not reset until the end of
       the subpattern is reached, an option setting in one branch does  affect
       subsequent  branches,  so  the above patterns match "SUNDAY" as well as
       "Saturday".


DUPLICATE SUBPATTERN NUMBERS

       Perl 5.10 introduced a feature whereby each alternative in a subpattern
       uses  the same numbers for its capturing parentheses. Such a subpattern
       starts with (?| and is itself a non-capturing subpattern. For  example,
       consider this pattern:

         (?|(Sat)ur|(Sun))day

       Because  the two alternatives are inside a (?| group, both sets of cap-
       turing parentheses are numbered one. Thus, when  the  pattern  matches,
       you  can  look  at captured substring number one, whichever alternative
       matched. This construct is useful when you want to  capture  part,  but
       not all, of one of a number of alternatives. Inside a (?| group, paren-
       theses are numbered as usual, but the number is reset at the  start  of
       each  branch.  The numbers of any capturing parentheses that follow the
       subpattern start after the highest number used in any branch. The  fol-
       lowing example is taken from the Perl documentation. The numbers under-
       neath show in which buffer the captured content will be stored.

         # before  ---------------branch-reset----------- after
         / ( a )  (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
         # 1            2         2  3        2     3     4

       A back reference to a numbered subpattern uses the  most  recent  value
       that  is  set  for that number by any subpattern. The following pattern
       matches "abcabc" or "defdef":

         /(?|(abc)|(def))\1/

       In contrast, a subroutine call to a numbered subpattern  always  refers
       to  the  first  one in the pattern with the given number. The following
       pattern matches "abcabc" or "defabc":

         /(?|(abc)|(def))(?1)/

       A relative reference such as (?-1) is no different: it is just a conve-
       nient way of computing an absolute group number.

       If  a condition test for a subpattern's having matched refers to a non-
       unique number, the test is true if any of the subpatterns of that  num-
       ber have matched.

       An  alternative approach to using this "branch reset" feature is to use
       duplicate named subpatterns, as described in the next section.


NAMED SUBPATTERNS

       Identifying capturing parentheses by number is simple, but  it  can  be
       very  hard  to keep track of the numbers in complicated regular expres-
       sions. Furthermore, if an  expression  is  modified,  the  numbers  may
       change. To help with this difficulty, PCRE2 supports the naming of sub-
       patterns. This feature was not added to Perl until release 5.10. Python
       had  the feature earlier, and PCRE1 introduced it at release 4.0, using
       the Python syntax. PCRE2 supports both the Perl and the Python  syntax.
       Perl  allows  identically numbered subpatterns to have different names,
       but PCRE2 does not.

       In PCRE2, a subpattern can be named in one of three ways:  (?<name>...)
       or  (?'name'...)  as in Perl, or (?P<name>...) as in Python. References
       to capturing parentheses from other parts of the pattern, such as  back
       references,  recursion,  and conditions, can be made by name as well as
       by number.

       Names consist of up to 32 alphanumeric characters and underscores,  but
       must  start  with  a  non-digit.  Named capturing parentheses are still
       allocated numbers as well as names, exactly as if the  names  were  not
       present. The PCRE2 API provides function calls for extracting the name-
       to-number translation table from a compiled  pattern.  There  are  also
       convenience functions for extracting a captured substring by name.

       By  default, a name must be unique within a pattern, but it is possible
       to relax this constraint by setting the PCRE2_DUPNAMES option  at  com-
       pile  time.  (Duplicate names are also always permitted for subpatterns
       with the same number, set up as described  in  the  previous  section.)
       Duplicate  names  can be useful for patterns where only one instance of
       the named parentheses can match.  Suppose you want to match the name of
       a  weekday,  either as a 3-letter abbreviation or as the full name, and
       in both cases you  want  to  extract  the  abbreviation.  This  pattern
       (ignoring the line breaks) does the job:

         (?<DN>Mon|Fri|Sun)(?:day)?|
         (?<DN>Tue)(?:sday)?|
         (?<DN>Wed)(?:nesday)?|
         (?<DN>Thu)(?:rsday)?|
         (?<DN>Sat)(?:urday)?

       There  are  five capturing substrings, but only one is ever set after a
       match.  (An alternative way of solving this problem is to use a "branch
       reset" subpattern, as described in the previous section.)

       The  convenience  functions for extracting the data by name returns the
       substring for the first (and in this example, the only)  subpattern  of
       that  name  that  matched.  This saves searching to find which numbered
       subpattern it was.

       If you make a back reference to  a  non-unique  named  subpattern  from
       elsewhere  in the pattern, the subpatterns to which the name refers are
       checked in the order in which they appear in the overall  pattern.  The
       first one that is set is used for the reference. For example, this pat-
       tern matches both "foofoo" and "barbar" but not "foobar" or "barfoo":

         (?:(?<n>foo)|(?<n>bar))\k<n>


       If you make a subroutine call to a non-unique named subpattern, the one
       that  corresponds  to  the first occurrence of the name is used. In the
       absence of duplicate numbers (see the previous section) this is the one
       with the lowest number.

       If you use a named reference in a condition test (see the section about
       conditions below), either to check whether a subpattern has matched, or
       to  check for recursion, all subpatterns with the same name are tested.
       If the condition is true for any one of them, the overall condition  is
       true.  This  is  the  same  behaviour as testing by number. For further
       details of the interfaces  for  handling  named  subpatterns,  see  the
       pcre2api documentation.

       Warning: You cannot use different names to distinguish between two sub-
       patterns with the same number because PCRE2 uses only the numbers  when
       matching. For this reason, an error is given at compile time if differ-
       ent names are given to subpatterns with the same number.  However,  you
       can always give the same name to subpatterns with the same number, even
       when PCRE2_DUPNAMES is not set.


REPETITION

       Repetition is specified by quantifiers, which can  follow  any  of  the
       following items:

         a literal data character
         the dot metacharacter
         the \C escape sequence
         the \X escape sequence
         the \R escape sequence
         an escape such as \d or \pL that matches a single character
         a character class
         a back reference
         a parenthesized subpattern (including most assertions)
         a subroutine call to a subpattern (recursive or otherwise)

       The  general repetition quantifier specifies a minimum and maximum num-
       ber of permitted matches, by giving the two numbers in  curly  brackets
       (braces),  separated  by  a comma. The numbers must be less than 65536,
       and the first must be less than or equal to the second. For example:

         z{2,4}

       matches "zz", "zzz", or "zzzz". A closing brace on its  own  is  not  a
       special  character.  If  the second number is omitted, but the comma is
       present, there is no upper limit; if the second number  and  the  comma
       are  both omitted, the quantifier specifies an exact number of required
       matches. Thus

         [aeiou]{3,}

       matches at least 3 successive vowels, but may match many more, whereas

         \d{8}

       matches exactly 8 digits. An opening curly bracket that  appears  in  a
       position  where a quantifier is not allowed, or one that does not match
       the syntax of a quantifier, is taken as a literal character. For  exam-
       ple, {,6} is not a quantifier, but a literal string of four characters.

       In UTF modes, quantifiers apply to characters rather than to individual
       code units. Thus, for example, \x{100}{2} matches two characters,  each
       of which is represented by a two-byte sequence in a UTF-8 string. Simi-
       larly, \X{3} matches three Unicode extended grapheme clusters, each  of
       which  may  be  several  code  units long (and they may be of different
       lengths).

       The quantifier {0} is permitted, causing the expression to behave as if
       the previous item and the quantifier were not present. This may be use-
       ful for subpatterns that are referenced as subroutines  from  elsewhere
       in the pattern (but see also the section entitled "Defining subpatterns
       for use by reference only" below). Items other  than  subpatterns  that
       have a {0} quantifier are omitted from the compiled pattern.

       For  convenience, the three most common quantifiers have single-charac-
       ter abbreviations:

         *    is equivalent to {0,}
         +    is equivalent to {1,}
         ?    is equivalent to {0,1}

       It is possible to construct infinite loops by  following  a  subpattern
       that can match no characters with a quantifier that has no upper limit,
       for example:

         (a?)*

       Earlier versions of Perl and PCRE1 used to give  an  error  at  compile
       time for such patterns. However, because there are cases where this can
       be useful, such patterns are now accepted, but if any repetition of the
       subpattern  does in fact match no characters, the loop is forcibly bro-
       ken.

       By default, the quantifiers are "greedy", that is, they match  as  much
       as  possible  (up  to  the  maximum number of permitted times), without
       causing the rest of the pattern to fail. The classic example  of  where
       this gives problems is in trying to match comments in C programs. These
       appear between /* and */ and within the comment,  individual  *  and  /
       characters  may  appear. An attempt to match C comments by applying the
       pattern

         /\*.*\*/

       to the string

         /* first comment */  not comment  /* second comment */

       fails, because it matches the entire string owing to the greediness  of
       the .*  item.

       If a quantifier is followed by a question mark, it ceases to be greedy,
       and instead matches the minimum number of times possible, so  the  pat-
       tern

         /\*.*?\*/

       does  the  right  thing with the C comments. The meaning of the various
       quantifiers is not otherwise changed,  just  the  preferred  number  of
       matches.   Do  not  confuse this use of question mark with its use as a
       quantifier in its own right. Because it has two uses, it can  sometimes
       appear doubled, as in

         \d??\d

       which matches one digit by preference, but can match two if that is the
       only way the rest of the pattern matches.

       If the PCRE2_UNGREEDY option is set (an option that is not available in
       Perl),  the  quantifiers are not greedy by default, but individual ones
       can be made greedy by following them with a  question  mark.  In  other
       words, it inverts the default behaviour.

       When  a  parenthesized  subpattern  is quantified with a minimum repeat
       count that is greater than 1 or with a limited maximum, more memory  is
       required  for  the  compiled  pattern, in proportion to the size of the
       minimum or maximum.

       If a pattern starts with  .*  or  .{0,}  and  the  PCRE2_DOTALL  option
       (equivalent  to  Perl's /s) is set, thus allowing the dot to match new-
       lines, the pattern is implicitly  anchored,  because  whatever  follows
       will  be  tried against every character position in the subject string,
       so there is no point in retrying the  overall  match  at  any  position
       after the first. PCRE2 normally treats such a pattern as though it were
       preceded by \A.

       In cases where it is known that the subject  string  contains  no  new-
       lines,  it  is worth setting PCRE2_DOTALL in order to obtain this opti-
       mization, or alternatively, using ^ to indicate anchoring explicitly.

       However, there are some cases where the optimization  cannot  be  used.
       When .*  is inside capturing parentheses that are the subject of a back
       reference elsewhere in the pattern, a match at the start may fail where
       a later one succeeds. Consider, for example:

         (.*)abc\1

       If  the subject is "xyz123abc123" the match point is the fourth charac-
       ter. For this reason, such a pattern is not implicitly anchored.

       Another case where implicit anchoring is not applied is when the  lead-
       ing  .* is inside an atomic group. Once again, a match at the start may
       fail where a later one succeeds. Consider this pattern:

         (?>.*?a)b

       It matches "ab" in the subject "aab". The use of the backtracking  con-
       trol  verbs  (*PRUNE)  and  (*SKIP) also disable this optimization, and
       there is an option, PCRE2_NO_DOTSTAR_ANCHOR, to do so explicitly.

       When a capturing subpattern is repeated, the value captured is the sub-
       string that matched the final iteration. For example, after

         (tweedle[dume]{3}\s*)+

       has matched "tweedledum tweedledee" the value of the captured substring
       is "tweedledee". However, if there are  nested  capturing  subpatterns,
       the  corresponding captured values may have been set in previous itera-
       tions. For example, after

         (a|(b))+

       matches "aba" the value of the second captured substring is "b".


ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS

       With both maximizing ("greedy") and minimizing ("ungreedy"  or  "lazy")
       repetition,  failure  of what follows normally causes the repeated item
       to be re-evaluated to see if a different number of repeats  allows  the
       rest  of  the pattern to match. Sometimes it is useful to prevent this,
       either to change the nature of the match, or to cause it  fail  earlier
       than  it otherwise might, when the author of the pattern knows there is
       no point in carrying on.

       Consider, for example, the pattern \d+foo when applied to  the  subject
       line

         123456bar

       After matching all 6 digits and then failing to match "foo", the normal
       action of the matcher is to try again with only 5 digits  matching  the
       \d+  item,  and  then  with  4,  and  so on, before ultimately failing.
       "Atomic grouping" (a term taken from Jeffrey  Friedl's  book)  provides
       the  means for specifying that once a subpattern has matched, it is not
       to be re-evaluated in this way.

       If we use atomic grouping for the previous example, the  matcher  gives
       up  immediately  on failing to match "foo" the first time. The notation
       is a kind of special parenthesis, starting with (?> as in this example:

         (?>\d+)foo

       This kind of parenthesis "locks up" the  part of the  pattern  it  con-
       tains  once  it  has matched, and a failure further into the pattern is
       prevented from backtracking into it. Backtracking past it  to  previous
       items, however, works as normal.

       An  alternative  description  is that a subpattern of this type matches
       exactly the string of characters that an identical  standalone  pattern
       would match, if anchored at the current point in the subject string.

       Atomic grouping subpatterns are not capturing subpatterns. Simple cases
       such as the above example can be thought of as a maximizing repeat that
       must  swallow  everything  it can. So, while both \d+ and \d+? are pre-
       pared to adjust the number of digits they match in order  to  make  the
       rest of the pattern match, (?>\d+) can only match an entire sequence of
       digits.

       Atomic groups in general can of course contain arbitrarily  complicated
       subpatterns,  and  can  be  nested. However, when the subpattern for an
       atomic group is just a single repeated item, as in the example above, a
       simpler  notation,  called  a "possessive quantifier" can be used. This
       consists of an additional + character  following  a  quantifier.  Using
       this notation, the previous example can be rewritten as

         \d++foo

       Note that a possessive quantifier can be used with an entire group, for
       example:

         (abc|xyz){2,3}+

       Possessive  quantifiers  are  always  greedy;  the   setting   of   the
       PCRE2_UNGREEDY  option  is  ignored. They are a convenient notation for
       the simpler forms of atomic group. However, there is no  difference  in
       the meaning of a possessive quantifier and the equivalent atomic group,
       though there may be a performance  difference;  possessive  quantifiers
       should be slightly faster.

       The  possessive  quantifier syntax is an extension to the Perl 5.8 syn-
       tax.  Jeffrey Friedl originated the idea (and the name)  in  the  first
       edition of his book. Mike McCloskey liked it, so implemented it when he
       built Sun's Java package, and PCRE1 copied it from there. It ultimately
       found its way into Perl at release 5.10.

       PCRE2  has  an  optimization  that automatically "possessifies" certain
       simple pattern constructs. For example, the sequence A+B is treated  as
       A++B  because  there is no point in backtracking into a sequence of A's
       when B must follow.  This feature can be disabled by the PCRE2_NO_AUTO-
       POSSESS option, or starting the pattern with (*NO_AUTO_POSSESS).

       When  a  pattern  contains an unlimited repeat inside a subpattern that
       can itself be repeated an unlimited number of  times,  the  use  of  an
       atomic  group  is  the  only way to avoid some failing matches taking a
       very long time indeed. The pattern

         (\D+|<\d+>)*[!?]

       matches an unlimited number of substrings that either consist  of  non-
       digits,  or  digits  enclosed in <>, followed by either ! or ?. When it
       matches, it runs quickly. However, if it is applied to

         aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

       it takes a long time before reporting  failure.  This  is  because  the
       string  can be divided between the internal \D+ repeat and the external
       * repeat in a large number of ways, and all  have  to  be  tried.  (The
       example  uses  [!?]  rather than a single character at the end, because
       both PCRE2 and Perl have an optimization that allows for  fast  failure
       when  a single character is used. They remember the last single charac-
       ter that is required for a match, and fail early if it is  not  present
       in  the  string.)  If  the pattern is changed so that it uses an atomic
       group, like this:

         ((?>\D+)|<\d+>)*[!?]

       sequences of non-digits cannot be broken, and failure happens quickly.


BACK REFERENCES

       Outside a character class, a backslash followed by a digit greater than
       0 (and possibly further digits) is a back reference to a capturing sub-
       pattern earlier (that is, to its left) in the pattern,  provided  there
       have been that many previous capturing left parentheses.

       However,  if the decimal number following the backslash is less than 8,
       it is always taken as a back reference, and causes  an  error  only  if
       there  are  not that many capturing left parentheses in the entire pat-
       tern. In other words, the parentheses that are referenced need  not  be
       to  the  left of the reference for numbers less than 8. A "forward back
       reference" of this type can make sense when a  repetition  is  involved
       and  the  subpattern to the right has participated in an earlier itera-
       tion.

       It is not possible to have a numerical "forward back  reference"  to  a
       subpattern  whose  number  is  8  or  more  using this syntax because a
       sequence such as \50 is interpreted as a character  defined  in  octal.
       See the subsection entitled "Non-printing characters" above for further
       details of the handling of digits following a backslash.  There  is  no
       such  problem  when named parentheses are used. A back reference to any
       subpattern is possible using named parentheses (see below).

       Another way of avoiding the ambiguity inherent in  the  use  of  digits
       following  a  backslash  is  to use the \g escape sequence. This escape
       must be followed by a signed or unsigned number, optionally enclosed in
       braces. These examples are all identical:

         (ring), \1
         (ring), \g1
         (ring), \g{1}

       An  unsigned number specifies an absolute reference without the ambigu-
       ity that is present in the older syntax. It is also useful when literal
       digits  follow  the reference. A signed number is a relative reference.
       Consider this example:

         (abc(def)ghi)\g{-1}

       The sequence \g{-1} is a reference to the most recently started captur-
       ing subpattern before \g, that is, is it equivalent to \2 in this exam-
       ple.  Similarly, \g{-2} would be equivalent to \1. The use of  relative
       references  can  be helpful in long patterns, and also in patterns that
       are created by  joining  together  fragments  that  contain  references
       within themselves.

       The  sequence  \g{+1}  is a reference to the next capturing subpattern.
       This kind of forward reference can be useful it patterns  that  repeat.
       Perl does not support the use of + in this way.

       A  back  reference matches whatever actually matched the capturing sub-
       pattern in the current subject string, rather  than  anything  matching
       the subpattern itself (see "Subpatterns as subroutines" below for a way
       of doing that). So the pattern

         (sens|respons)e and \1ibility

       matches "sense and sensibility" and "response and responsibility",  but
       not  "sense and responsibility". If caseful matching is in force at the
       time of the back reference, the case of letters is relevant. For  exam-
       ple,

         ((?i)rah)\s+\1

       matches  "rah  rah"  and  "RAH RAH", but not "RAH rah", even though the
       original capturing subpattern is matched caselessly.

       There are several different ways of writing back  references  to  named
       subpatterns.  The  .NET syntax \k{name} and the Perl syntax \k<name> or
       \k'name' are supported, as is the Python syntax (?P=name). Perl  5.10's
       unified back reference syntax, in which \g can be used for both numeric
       and named references, is also supported. We  could  rewrite  the  above
       example in any of the following ways:

         (?<p1>(?i)rah)\s+\k<p1>
         (?'p1'(?i)rah)\s+\k{p1}
         (?P<p1>(?i)rah)\s+(?P=p1)
         (?<p1>(?i)rah)\s+\g{p1}

       A  subpattern  that  is  referenced  by  name may appear in the pattern
       before or after the reference.

       There may be more than one back reference to the same subpattern. If  a
       subpattern  has  not actually been used in a particular match, any back
       references to it always fail by default. For example, the pattern

         (a|(bc))\2

       always fails if it starts to match "a" rather than  "bc".  However,  if
       the  PCRE2_MATCH_UNSET_BACKREF  option  is  set at compile time, a back
       reference to an unset value matches an empty string.

       Because there may be many capturing parentheses in a pattern, all  dig-
       its  following a backslash are taken as part of a potential back refer-
       ence number.  If the pattern continues with  a  digit  character,  some
       delimiter  must  be  used  to  terminate  the  back  reference.  If the
       PCRE2_EXTENDED option is set, this can be white space.  Otherwise,  the
       \g{ syntax or an empty comment (see "Comments" below) can be used.

   Recursive back references

       A  back reference that occurs inside the parentheses to which it refers
       fails when the subpattern is first used, so, for example,  (a\1)  never
       matches.   However,  such references can be useful inside repeated sub-
       patterns. For example, the pattern

         (a|b\1)+

       matches any number of "a"s and also "aba", "ababbaa" etc. At each iter-
       ation  of  the  subpattern,  the  back  reference matches the character
       string corresponding to the previous iteration. In order  for  this  to
       work,  the  pattern must be such that the first iteration does not need
       to match the back reference. This can be done using alternation, as  in
       the example above, or by a quantifier with a minimum of zero.

       Back  references of this type cause the group that they reference to be
       treated as an atomic group.  Once the whole group has been  matched,  a
       subsequent  matching  failure cannot cause backtracking into the middle
       of the group.


ASSERTIONS

       An assertion is a test on the characters  following  or  preceding  the
       current matching point that does not consume any characters. The simple
       assertions coded as \b, \B, \A, \G, \Z,  \z,  ^  and  $  are  described
       above.

       More  complicated  assertions  are  coded as subpatterns. There are two
       kinds: those that look ahead of the current  position  in  the  subject
       string,  and  those  that look behind it, and in each case an assertion
       may be positive (must succeed for matching  to  continue)  or  negative
       (must not succeed for matching to continue). An assertion subpattern is
       matched in the normal way, except that, when matching continues  after-
       wards,  the matching position in the subject string is as it was at the
       start of the assertion.

       Assertion subpatterns are not capturing subpatterns.  If  an  assertion
       contains  capturing  subpatterns  within  it, these are counted for the
       purposes of numbering the capturing subpatterns in the  whole  pattern.
       However,  substring  capturing  is carried out only for positive asser-
       tions that succeed, that is, one of their branches matches, so matching
       continues  after the assertion. If all branches of a positive assertion
       fail to match, nothing is captured, and control is passed to the previ-
       ous backtracking point.

       No  capturing  is done for a negative assertion unless it is being used
       as a condition in a conditional subpattern (see the discussion  below).
       Matching  continues  after a non-conditional negative assertion only if
       all its branches fail to match.

       For  compatibility  with  Perl,  most  assertion  subpatterns  may   be
       repeated;  though  it  makes  no sense to assert the same thing several
       times, the side effect of capturing  parentheses  may  occasionally  be
       useful.  However,  an  assertion  that forms the condition for a condi-
       tional subpattern may not be quantified. In practice, for other  asser-
       tions, there only three cases:

       (1)  If  the  quantifier  is  {0}, the assertion is never obeyed during
       matching.  However, it may  contain  internal  capturing  parenthesized
       groups that are called from elsewhere via the subroutine mechanism.

       (2)  If quantifier is {0,n} where n is greater than zero, it is treated
       as if it were {0,1}. At run time, the rest  of  the  pattern  match  is
       tried with and without the assertion, the order depending on the greed-
       iness of the quantifier.

       (3) If the minimum repetition is greater than zero, the  quantifier  is
       ignored.   The  assertion  is  obeyed just once when encountered during
       matching.

   Lookahead assertions

       Lookahead assertions start with (?= for positive assertions and (?! for
       negative assertions. For example,

         \w+(?=;)

       matches  a word followed by a semicolon, but does not include the semi-
       colon in the match, and

         foo(?!bar)

       matches any occurrence of "foo" that is not  followed  by  "bar".  Note
       that the apparently similar pattern

         (?!foo)bar

       does  not  find  an  occurrence  of "bar" that is preceded by something
       other than "foo"; it finds any occurrence of "bar" whatsoever,  because
       the assertion (?!foo) is always true when the next three characters are
       "bar". A lookbehind assertion is needed to achieve the other effect.

       If you want to force a matching failure at some point in a pattern, the
       most  convenient  way  to  do  it  is with (?!) because an empty string
       always matches, so an assertion that requires there not to be an  empty
       string must always fail.  The backtracking control verb (*FAIL) or (*F)
       is a synonym for (?!).

   Lookbehind assertions

       Lookbehind assertions start with (?<= for positive assertions and  (?<!
       for negative assertions. For example,

         (?<!foo)bar

       does  find  an  occurrence  of "bar" that is not preceded by "foo". The
       contents of a lookbehind assertion are restricted  such  that  all  the
       strings it matches must have a fixed length. However, if there are sev-
       eral top-level alternatives, they do not all  have  to  have  the  same
       fixed length. Thus

         (?<=bullock|donkey)

       is permitted, but

         (?<!dogs?|cats?)

       causes  an  error at compile time. Branches that match different length
       strings are permitted only at the top level of a lookbehind  assertion.
       This is an extension compared with Perl, which requires all branches to
       match the same length of string. An assertion such as

         (?<=ab(c|de))

       is not permitted, because its single top-level  branch  can  match  two
       different  lengths,  but  it is acceptable to PCRE2 if rewritten to use
       two top-level branches:

         (?<=abc|abde)

       In some cases, the escape sequence \K (see above) can be  used  instead
       of a lookbehind assertion to get round the fixed-length restriction.

       The  implementation  of lookbehind assertions is, for each alternative,
       to temporarily move the current position back by the fixed  length  and
       then try to match. If there are insufficient characters before the cur-
       rent position, the assertion fails.

       In UTF-8 and UTF-16 modes, PCRE2 does not allow the  \C  escape  (which
       matches  a single code unit even in a UTF mode) to appear in lookbehind
       assertions, because it makes it impossible to calculate the  length  of
       the  lookbehind.  The \X and \R escapes, which can match different num-
       bers of code units, are never permitted in lookbehinds.

       "Subroutine" calls (see below) such as (?2) or (?&X) are  permitted  in
       lookbehinds,  as  long as the subpattern matches a fixed-length string.
       However, recursion, that is, a "subroutine" call into a group  that  is
       already active, is not supported.

       Perl  does  not support back references in lookbehinds. PCRE2 does sup-
       port  them,   but   only   if   certain   conditions   are   met.   The
       PCRE2_MATCH_UNSET_BACKREF  option must not be set, there must be no use
       of (?| in the pattern (it creates duplicate subpattern numbers), and if
       the  back reference is by name, the name must be unique. Of course, the
       referenced subpattern must itself be of  fixed  length.  The  following
       pattern matches words containing at least two characters that begin and
       end with the same character:

          \b(\w)\w++(?<=\1)

       Possessive quantifiers can  be  used  in  conjunction  with  lookbehind
       assertions to specify efficient matching of fixed-length strings at the
       end of subject strings. Consider a simple pattern such as

         abcd$

       when applied to a long string that does  not  match.  Because  matching
       proceeds  from  left to right, PCRE2 will look for each "a" in the sub-
       ject and then see if what follows matches the rest of the  pattern.  If
       the pattern is specified as

         ^.*abcd$

       the  initial .* matches the entire string at first, but when this fails
       (because there is no following "a"), it backtracks to match all but the
       last  character,  then all but the last two characters, and so on. Once
       again the search for "a" covers the entire string, from right to  left,
       so we are no better off. However, if the pattern is written as

         ^.*+(?<=abcd)

       there can be no backtracking for the .*+ item because of the possessive
       quantifier; it can match only the entire string. The subsequent lookbe-
       hind  assertion  does  a single test on the last four characters. If it
       fails, the match fails immediately. For  long  strings,  this  approach
       makes a significant difference to the processing time.

   Using multiple assertions

       Several assertions (of any sort) may occur in succession. For example,

         (?<=\d{3})(?<!999)foo

       matches  "foo" preceded by three digits that are not "999". Notice that
       each of the assertions is applied independently at the  same  point  in
       the  subject  string.  First  there  is a check that the previous three
       characters are all digits, and then there is  a  check  that  the  same
       three characters are not "999".  This pattern does not match "foo" pre-
       ceded by six characters, the first of which are  digits  and  the  last
       three  of  which  are not "999". For example, it doesn't match "123abc-
       foo". A pattern to do that is

         (?<=\d{3}...)(?<!999)foo

       This time the first assertion looks at the  preceding  six  characters,
       checking that the first three are digits, and then the second assertion
       checks that the preceding three characters are not "999".

       Assertions can be nested in any combination. For example,

         (?<=(?<!foo)bar)baz

       matches an occurrence of "baz" that is preceded by "bar" which in  turn
       is not preceded by "foo", while

         (?<=\d{3}(?!999)...)foo

       is  another pattern that matches "foo" preceded by three digits and any
       three characters that are not "999".


CONDITIONAL SUBPATTERNS

       It is possible to cause the matching process to obey a subpattern  con-
       ditionally  or to choose between two alternative subpatterns, depending
       on the result of an assertion, or whether a specific capturing  subpat-
       tern  has  already  been matched. The two possible forms of conditional
       subpattern are:

         (?(condition)yes-pattern)
         (?(condition)yes-pattern|no-pattern)

       If the condition is satisfied, the yes-pattern is used;  otherwise  the
       no-pattern  (if  present)  is used. If there are more than two alterna-
       tives in the subpattern, a compile-time error occurs. Each of  the  two
       alternatives may itself contain nested subpatterns of any form, includ-
       ing  conditional  subpatterns;  the  restriction  to  two  alternatives
       applies only at the level of the condition. This pattern fragment is an
       example where the alternatives are complex:

         (?(1) (A|B|C) | (D | (?(2)E|F) | E) )


       There are five kinds of condition: references  to  subpatterns,  refer-
       ences  to  recursion,  two pseudo-conditions called DEFINE and VERSION,
       and assertions.

   Checking for a used subpattern by number

       If the text between the parentheses consists of a sequence  of  digits,
       the condition is true if a capturing subpattern of that number has pre-
       viously matched. If there is more than one  capturing  subpattern  with
       the  same  number  (see  the earlier section about duplicate subpattern
       numbers), the condition is true if any of them have matched. An  alter-
       native  notation is to precede the digits with a plus or minus sign. In
       this case, the subpattern number is relative rather than absolute.  The
       most  recently opened parentheses can be referenced by (?(-1), the next
       most recent by (?(-2), and so on. Inside loops it can also  make  sense
       to refer to subsequent groups. The next parentheses to be opened can be
       referenced as (?(+1), and so on. (The value zero in any of these  forms
       is not used; it provokes a compile-time error.)

       Consider  the  following  pattern, which contains non-significant white
       space to make it more readable (assume the PCRE2_EXTENDED  option)  and
       to divide it into three parts for ease of discussion:

         ( \( )?    [^()]+    (?(1) \) )

       The  first  part  matches  an optional opening parenthesis, and if that
       character is present, sets it as the first captured substring. The sec-
       ond  part  matches one or more characters that are not parentheses. The
       third part is a conditional subpattern that tests whether  or  not  the
       first  set  of  parentheses  matched.  If they did, that is, if subject
       started with an opening parenthesis, the condition is true, and so  the
       yes-pattern  is  executed and a closing parenthesis is required. Other-
       wise, since no-pattern is not present, the subpattern matches  nothing.
       In  other  words,  this  pattern matches a sequence of non-parentheses,
       optionally enclosed in parentheses.

       If you were embedding this pattern in a larger one,  you  could  use  a
       relative reference:

         ...other stuff... ( \( )?    [^()]+    (?(-1) \) ) ...

       This  makes  the  fragment independent of the parentheses in the larger
       pattern.

   Checking for a used subpattern by name

       Perl uses the syntax (?(<name>)...) or (?('name')...)  to  test  for  a
       used  subpattern  by  name.  For compatibility with earlier versions of
       PCRE1, which had this facility before Perl, the syntax (?(name)...)  is
       also  recognized.  Note,  however, that undelimited names consisting of
       the letter R followed by digits are ambiguous (see the  following  sec-
       tion).

       Rewriting the above example to use a named subpattern gives this:

         (?<OPEN> \( )?    [^()]+    (?(<OPEN>) \) )

       If  the  name used in a condition of this kind is a duplicate, the test
       is applied to all subpatterns of the same name, and is true if any  one
       of them has matched.

   Checking for pattern recursion

       "Recursion"  in  this sense refers to any subroutine-like call from one
       part of the pattern to another, whether or not it  is  actually  recur-
       sive.  See  the sections entitled "Recursive patterns" and "Subpatterns
       as subroutines" below for details of recursion and subpattern calls.

       If a condition is the string (R), and there is no subpattern  with  the
       name  R,  the condition is true if matching is currently in a recursion
       or subroutine call to the whole pattern or any  subpattern.  If  digits
       follow  the  letter  R,  and there is no subpattern with that name, the
       condition is true if the most recent call is into a subpattern with the
       given  number,  which must exist somewhere in the overall pattern. This
       is a contrived example that is equivalent to a+b:

         ((?(R1)a+|(?1)b))

       However, in both cases, if there is a subpattern with a matching  name,
       the  condition  tests  for  its  being set, as described in the section
       above, instead of testing for recursion. For example, creating a  group
       with  the  name  R1  by  adding (?<R1>) to the above pattern completely
       changes its meaning.

       If a name preceded by ampersand follows the letter R, for example:

         (?(R&name)...)

       the condition is true if the most recent recursion is into a subpattern
       of that name (which must exist within the pattern).

       This condition does not check the entire recursion stack. It tests only
       the current level. If the name used in a condition of this  kind  is  a
       duplicate, the test is applied to all subpatterns of the same name, and
       is true if any one of them is the most recent recursion.

       At "top level", all these recursion test conditions are false.

   Defining subpatterns for use by reference only

       If the condition is the string (DEFINE), the condition is always false,
       even  if there is a group with the name DEFINE. In this case, there may
       be only one alternative in the subpattern. It is always skipped if con-
       trol  reaches  this point in the pattern; the idea of DEFINE is that it
       can be used to define subroutines that can  be  referenced  from  else-
       where. (The use of subroutines is described below.) For example, a pat-
       tern to match an IPv4 address such as "192.168.23.245" could be written
       like this (ignore white space and line breaks):

         (?(DEFINE) (?<byte> 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) )
         \b (?&byte) (\.(?&byte)){3} \b

       The  first part of the pattern is a DEFINE group inside which a another
       group named "byte" is defined. This matches an individual component  of
       an  IPv4  address  (a number less than 256). When matching takes place,
       this part of the pattern is skipped because DEFINE acts  like  a  false
       condition.  The  rest of the pattern uses references to the named group
       to match the four dot-separated components of an IPv4 address,  insist-
       ing on a word boundary at each end.

   Checking the PCRE2 version

       Programs  that link with a PCRE2 library can check the version by call-
       ing pcre2_config() with appropriate arguments.  Users  of  applications
       that  do  not have access to the underlying code cannot do this. A spe-
       cial "condition" called VERSION exists to allow such users to  discover
       which version of PCRE2 they are dealing with by using this condition to
       match a string such as "yesno". VERSION must be followed either by  "="
       or ">=" and a version number.  For example:

         (?(VERSION>=10.4)yes|no)

       This  pattern matches "yes" if the PCRE2 version is greater or equal to
       10.4, or "no" otherwise. The fractional part of the version number  may
       not contain more than two digits.

   Assertion conditions

       If  the  condition  is  not  in any of the above formats, it must be an
       assertion.  This may be a positive or negative lookahead or  lookbehind
       assertion.  Consider  this  pattern,  again  containing non-significant
       white space, and with the two alternatives on the second line:

         (?(?=[^a-z]*[a-z])
         \d{2}-[a-z]{3}-\d{2}  |  \d{2}-\d{2}-\d{2} )

       The condition  is  a  positive  lookahead  assertion  that  matches  an
       optional  sequence of non-letters followed by a letter. In other words,
       it tests for the presence of at least one letter in the subject.  If  a
       letter  is found, the subject is matched against the first alternative;
       otherwise it is  matched  against  the  second.  This  pattern  matches
       strings  in  one  of the two forms dd-aaa-dd or dd-dd-dd, where aaa are
       letters and dd are digits.

       When an assertion that is a condition contains  capturing  subpatterns,
       any  capturing that occurs in a matching branch is retained afterwards,
       for both positive and negative assertions, because matching always con-
       tinues after the assertion, whether it succeeds or fails. (Compare non-
       conditional assertions, when captures are retained  only  for  positive
       assertions that succeed.)


COMMENTS

       There are two ways of including comments in patterns that are processed
       by PCRE2. In both cases, the start of the comment  must  not  be  in  a
       character  class,  nor  in  the middle of any other sequence of related
       characters such as (?: or a subpattern name or number.  The  characters
       that make up a comment play no part in the pattern matching.

       The  sequence (?# marks the start of a comment that continues up to the
       next closing parenthesis. Nested parentheses are not permitted. If  the
       PCRE2_EXTENDED  option is set, an unescaped # character also introduces
       a comment, which in this case continues to immediately after  the  next
       newline  character  or character sequence in the pattern. Which charac-
       ters are interpreted as newlines is controlled by an option  passed  to
       the  compiling  function  or  by a special sequence at the start of the
       pattern, as described in the  section  entitled  "Newline  conventions"
       above.  Note  that the end of this type of comment is a literal newline
       sequence in the pattern; escape sequences that happen  to  represent  a
       newline   do  not  count.  For  example,  consider  this  pattern  when
       PCRE2_EXTENDED is set, and the default  newline  convention  (a  single
       linefeed character) is in force:

         abc #comment \n still comment

       On  encountering  the # character, pcre2_compile() skips along, looking
       for a newline in the pattern. The sequence \n is still literal at  this
       stage,  so  it does not terminate the comment. Only an actual character
       with the code value 0x0a (the default newline) does so.


RECURSIVE PATTERNS

       Consider the problem of matching a string in parentheses, allowing  for
       unlimited  nested  parentheses.  Without the use of recursion, the best
       that can be done is to use a pattern that  matches  up  to  some  fixed
       depth  of  nesting.  It  is not possible to handle an arbitrary nesting
       depth.

       For some time, Perl has provided a facility that allows regular expres-
       sions  to recurse (amongst other things). It does this by interpolating
       Perl code in the expression at run time, and the code can refer to  the
       expression itself. A Perl pattern using code interpolation to solve the
       parentheses problem can be created like this:

         $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;

       The (?p{...}) item interpolates Perl code at run time, and in this case
       refers recursively to the pattern in which it appears.

       Obviously,  PCRE2  cannot  support  the  interpolation  of  Perl  code.
       Instead, it supports special syntax for recursion of  the  entire  pat-
       tern, and also for individual subpattern recursion. After its introduc-
       tion in PCRE1 and Python,  this  kind  of  recursion  was  subsequently
       introduced into Perl at release 5.10.

       A  special  item  that consists of (? followed by a number greater than
       zero and a closing parenthesis is a recursive subroutine  call  of  the
       subpattern  of  the  given  number, provided that it occurs inside that
       subpattern. (If not, it is a non-recursive subroutine  call,  which  is
       described  in  the  next  section.)  The special item (?R) or (?0) is a
       recursive call of the entire regular expression.

       This PCRE2 pattern solves the nested parentheses  problem  (assume  the
       PCRE2_EXTENDED option is set so that white space is ignored):

         \( ( [^()]++ | (?R) )* \)

       First  it matches an opening parenthesis. Then it matches any number of
       substrings which can either be a  sequence  of  non-parentheses,  or  a
       recursive  match  of the pattern itself (that is, a correctly parenthe-
       sized substring).  Finally there is a closing parenthesis. Note the use
       of a possessive quantifier to avoid backtracking into sequences of non-
       parentheses.

       If this were part of a larger pattern, you would not  want  to  recurse
       the entire pattern, so instead you could use this:

         ( \( ( [^()]++ | (?1) )* \) )

       We  have  put the pattern into parentheses, and caused the recursion to
       refer to them instead of the whole pattern.

       In a larger pattern,  keeping  track  of  parenthesis  numbers  can  be
       tricky.  This is made easier by the use of relative references. Instead
       of (?1) in the pattern above you can write (?-2) to refer to the second
       most  recently  opened  parentheses  preceding  the recursion. In other
       words, a negative number counts capturing  parentheses  leftwards  from
       the point at which it is encountered.

       Be aware however, that if duplicate subpattern numbers are in use, rel-
       ative references refer to the earliest subpattern with the  appropriate
       number. Consider, for example:

         (?|(a)|(b)) (c) (?-2)

       The  first  two  capturing  groups (a) and (b) are both numbered 1, and
       group (c) is number 2. When the reference  (?-2)  is  encountered,  the
       second most recently opened parentheses has the number 1, but it is the
       first such group (the (a) group) to which the  recursion  refers.  This
       would  be  the  same  if  an absolute reference (?1) was used. In other
       words, relative references are just a shorthand for computing  a  group
       number.

       It  is  also  possible  to refer to subsequently opened parentheses, by
       writing references such as (?+2). However, these  cannot  be  recursive
       because  the  reference  is  not inside the parentheses that are refer-
       enced. They are always non-recursive subroutine calls, as described  in
       the next section.

       An  alternative  approach  is to use named parentheses. The Perl syntax
       for this is (?&name); PCRE1's earlier syntax  (?P>name)  is  also  sup-
       ported. We could rewrite the above example as follows:

         (?<pn> \( ( [^()]++ | (?&pn) )* \) )

       If  there  is more than one subpattern with the same name, the earliest
       one is used.

       The example pattern that we have been looking at contains nested unlim-
       ited  repeats,  and  so the use of a possessive quantifier for matching
       strings of non-parentheses is important when applying  the  pattern  to
       strings that do not match. For example, when this pattern is applied to

         (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()

       it  yields  "no  match" quickly. However, if a possessive quantifier is
       not used, the match runs for a very long time indeed because there  are
       so  many  different  ways the + and * repeats can carve up the subject,
       and all have to be tested before failure can be reported.

       At the end of a match, the values of capturing  parentheses  are  those
       from  the outermost level. If you want to obtain intermediate values, a
       callout function can be used (see below and the pcre2callout documenta-
       tion). If the pattern above is matched against

         (ab(cd)ef)

       the  value  for  the  inner capturing parentheses (numbered 2) is "ef",
       which is the last value taken on at the top level. If a capturing  sub-
       pattern  is  not  matched at the top level, its final captured value is
       unset, even if it was (temporarily) set at a deeper  level  during  the
       matching process.

       If there are more than 15 capturing parentheses in a pattern, PCRE2 has
       to obtain extra memory from the heap to store data during a  recursion.
       If   no   memory   can   be   obtained,   the   match  fails  with  the
       PCRE2_ERROR_NOMEMORY error.

       Do not confuse the (?R) item with the condition (R),  which  tests  for
       recursion.   Consider  this pattern, which matches text in angle brack-
       ets, allowing for arbitrary nesting. Only digits are allowed in  nested
       brackets  (that is, when recursing), whereas any characters are permit-
       ted at the outer level.

         < (?: (?(R) \d++  | [^<>]*+) | (?R)) * >

       In this pattern, (?(R) is the start of a conditional  subpattern,  with
       two  different  alternatives for the recursive and non-recursive cases.
       The (?R) item is the actual recursive call.

   Differences in recursion processing between PCRE2 and Perl

       Some former differences between PCRE2 and Perl no longer exist.

       Before release 10.30, recursion processing in PCRE2 differed from  Perl
       in  that  a  recursive  subpattern call was always treated as an atomic
       group. That is, once it had matched some of the subject string, it  was
       never  re-entered,  even if it contained untried alternatives and there
       was a subsequent matching failure. (Historical note:  PCRE  implemented
       recursion before Perl did.)

       Starting  with  release 10.30, recursive subroutine calls are no longer
       treated as atomic. That is, they can be re-entered to try unused alter-
       natives  if  there  is a matching failure later in the pattern. This is
       now compatible with the way Perl works. If you want a  subroutine  call
       to be atomic, you must explicitly enclose it in an atomic group.

       Supporting  backtracking  into  recursions  simplifies certain types of
       recursive  pattern.  For  example,  this  pattern  matches  palindromic
       strings:

         ^((.)(?1)\2|.?)$

       The  second  branch  in the group matches a single central character in
       the palindrome when there are an odd number of characters,  or  nothing
       when  there  are  an even number of characters, but in order to work it
       has to be able to try the second case when  the  rest  of  the  pattern
       match fails. If you want to match typical palindromic phrases, the pat-
       tern has to ignore all non-word characters,  which  can  be  done  like
       this:

         ^\W*+((.)\W*+(?1)\W*+\2|\W*+.?)\W*+$

       If  run  with  the  PCRE2_CASELESS option, this pattern matches phrases
       such as "A man, a plan, a canal: Panama!". Note the use of the  posses-
       sive  quantifier  *+  to  avoid backtracking into sequences of non-word
       characters. Without this, PCRE2 takes a great deal longer (ten times or
       more)  to  match typical phrases, and Perl takes so long that you think
       it has gone into a loop.

       Another way in which PCRE2 and Perl used to differ in  their  recursion
       processing  is  in  the  handling of captured values. Formerly in Perl,
       when a subpattern was called recursively or as a  subpattern  (see  the
       next  section),  it had no access to any values that were captured out-
       side the recursion, whereas in PCRE2 these values  can  be  referenced.
       Consider this pattern:

         ^(.)(\1|a(?2))

       This  pattern matches "bab". The first capturing parentheses match "b",
       then in the second group, when the back reference  \1  fails  to  match
       "b",  the  second  alternative  matches  "a"  and then recurses. In the
       recursion, \1 does now match "b" and so the whole match succeeds.  This
       match  used  to  fail in Perl, but in later versions (I tried 5.024) it
       now works.


SUBPATTERNS AS SUBROUTINES

       If the syntax for a recursive subpattern call (either by number  or  by
       name)  is  used outside the parentheses to which it refers, it operates
       like a subroutine in a programming language. The called subpattern  may
       be  defined  before or after the reference. A numbered reference can be
       absolute or relative, as in these examples:

         (...(absolute)...)...(?2)...
         (...(relative)...)...(?-1)...
         (...(?+1)...(relative)...

       An earlier example pointed out that the pattern

         (sens|respons)e and \1ibility

       matches "sense and sensibility" and "response and responsibility",  but
       not "sense and responsibility". If instead the pattern

         (sens|respons)e and (?1)ibility

       is  used, it does match "sense and responsibility" as well as the other
       two strings. Another example is  given  in  the  discussion  of  DEFINE
       above.

       Like  recursions,  subroutine  calls  used to be treated as atomic, but
       this changed at PCRE2 release 10.30, so  backtracking  into  subroutine
       calls  can  now  occur. However, any capturing parentheses that are set
       during the subroutine call revert to their previous values afterwards.

       Processing options such as case-independence are fixed when  a  subpat-
       tern  is defined, so if it is used as a subroutine, such options cannot
       be changed for different calls. For example, consider this pattern:

         (abc)(?i:(?-1))

       It matches "abcabc". It does not match "abcABC" because the  change  of
       processing option does not affect the called subpattern.


ONIGURUMA SUBROUTINE SYNTAX

       For  compatibility with Oniguruma, the non-Perl syntax \g followed by a
       name or a number enclosed either in angle brackets or single quotes, is
       an  alternative  syntax  for  referencing a subpattern as a subroutine,
       possibly recursively. Here are two of the examples used above,  rewrit-
       ten using this syntax:

         (?<pn> \( ( (?>[^()]+) | \g<pn> )* \) )
         (sens|respons)e and \g'1'ibility

       PCRE2  supports an extension to Oniguruma: if a number is preceded by a
       plus or a minus sign it is taken as a relative reference. For example:

         (abc)(?i:\g<-1>)

       Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are  not
       synonymous.  The former is a back reference; the latter is a subroutine
       call.


CALLOUTS

       Perl has a feature whereby using the sequence (?{...}) causes arbitrary
       Perl  code to be obeyed in the middle of matching a regular expression.
       This makes it possible, amongst other things, to extract different sub-
       strings that match the same pair of parentheses when there is a repeti-
       tion.

       PCRE2 provides a similar feature, but of course it  cannot  obey  arbi-
       trary  Perl  code. The feature is called "callout". The caller of PCRE2
       provides an external function by putting its entry  point  in  a  match
       context  using  the function pcre2_set_callout(), and then passing that
       context to pcre2_match() or pcre2_dfa_match(). If no match  context  is
       passed, or if the callout entry point is set to NULL, callouts are dis-
       abled.

       Within a regular expression, (?C<arg>) indicates a point at  which  the
       external  function  is  to  be  called. There are two kinds of callout:
       those with a numerical argument and those with a string argument.  (?C)
       on  its  own with no argument is treated as (?C0). A numerical argument
       allows the  application  to  distinguish  between  different  callouts.
       String  arguments  were added for release 10.20 to make it possible for
       script languages that use PCRE2 to embed short scripts within  patterns
       in a similar way to Perl.

       During matching, when PCRE2 reaches a callout point, the external func-
       tion is called. It is provided with the number or  string  argument  of
       the  callout, the position in the pattern, and one item of data that is
       also set in the match block. The callout function may cause matching to
       proceed, to backtrack, or to fail.

       By  default,  PCRE2  implements  a  number of optimizations at matching
       time, and one side-effect is that sometimes callouts  are  skipped.  If
       you  need all possible callouts to happen, you need to set options that
       disable the relevant optimizations. More details, including a  complete
       description  of  the programming interface to the callout function, are
       given in the pcre2callout documentation.

   Callouts with numerical arguments

       If you just want to have  a  means  of  identifying  different  callout
       points,  put  a  number  less than 256 after the letter C. For example,
       this pattern has two callout points:

         (?C1)abc(?C2)def

       If the PCRE2_AUTO_CALLOUT flag is passed to pcre2_compile(),  numerical
       callouts  are  automatically installed before each item in the pattern.
       They are all numbered 255. If there is a conditional group in the  pat-
       tern whose condition is an assertion, an additional callout is inserted
       just before the condition. An explicit callout may also be set at  this
       position, as in this example:

         (?(?C9)(?=a)abc|def)

       Note that this applies only to assertion conditions, not to other types
       of condition.

   Callouts with string arguments

       A delimited string may be used instead of a number as a  callout  argu-
       ment.  The  starting  delimiter  must be one of ` ' " ^ % # $ { and the
       ending delimiter is the same as the start, except for {, where the end-
       ing  delimiter  is  }.  If  the  ending  delimiter is needed within the
       string, it must be doubled. For example:

         (?C'ab ''c'' d')xyz(?C{any text})pqr

       The doubling is removed before the string  is  passed  to  the  callout
       function.


BACKTRACKING CONTROL

       There  are  a  number  of  special "Backtracking Control Verbs" (to use
       Perl's terminology) that modify the behaviour  of  backtracking  during
       matching.  They are generally of the form (*VERB) or (*VERB:NAME). Some
       verbs take either form,  possibly  behaving  differently  depending  on
       whether or not a name is present.

       By  default,  for  compatibility  with  Perl, a name is any sequence of
       characters that does not include a closing parenthesis. The name is not
       processed  in  any  way,  and  it  is not possible to include a closing
       parenthesis  in  the  name.   This  can  be  changed  by  setting   the
       PCRE2_ALT_VERBNAMES  option,  but the result is no longer Perl-compati-
       ble.

       When PCRE2_ALT_VERBNAMES is set, backslash  processing  is  applied  to
       verb  names  and  only  an unescaped closing parenthesis terminates the
       name. However, the only backslash items that are permitted are \Q,  \E,
       and  sequences such as \x{100} that define character code points. Char-
       acter type escapes such as \d are faulted.

       A closing parenthesis can be included in a name either as \) or between
       \Q  and  \E. In addition to backslash processing, if the PCRE2_EXTENDED
       option is also set, unescaped whitespace in verb names is skipped,  and
       #-comments  are  recognized,  exactly  as  in  the rest of the pattern.
       PCRE2_EXTENDED does not affect verb names unless PCRE2_ALT_VERBNAMES is
       also set.

       The  maximum  length of a name is 255 in the 8-bit library and 65535 in
       the 16-bit and 32-bit libraries. If the name is empty, that is, if  the
       closing  parenthesis immediately follows the colon, the effect is as if
       the colon were not there. Any number of these verbs may occur in a pat-
       tern.

       Since  these  verbs  are  specifically related to backtracking, most of
       them can be used only when the pattern is to be matched using the  tra-
       ditional matching function, because that uses a backtracking algorithm.
       With the exception of (*FAIL), which behaves like  a  failing  negative
       assertion, the backtracking control verbs cause an error if encountered
       by the DFA matching function.

       The behaviour of these verbs in repeated  groups,  assertions,  and  in
       subpatterns called as subroutines (whether or not recursively) is docu-
       mented below.

   Optimizations that affect backtracking verbs

       PCRE2 contains some optimizations that are used to speed up matching by
       running some checks at the start of each match attempt. For example, it
       may know the minimum length of matching subject, or that  a  particular
       character must be present. When one of these optimizations bypasses the
       running of a match,  any  included  backtracking  verbs  will  not,  of
       course, be processed. You can suppress the start-of-match optimizations
       by setting the PCRE2_NO_START_OPTIMIZE option when  calling  pcre2_com-
       pile(),  or by starting the pattern with (*NO_START_OPT). There is more
       discussion of this option in the section entitled "Compiling a pattern"
       in the pcre2api documentation.

       Experiments  with  Perl  suggest that it too has similar optimizations,
       sometimes leading to anomalous results.

   Verbs that act immediately

       The following verbs act as soon as they are encountered. They  may  not
       be followed by a name.

          (*ACCEPT)

       This  verb causes the match to end successfully, skipping the remainder
       of the pattern. However, when it is inside a subpattern that is  called
       as  a  subroutine, only that subpattern is ended successfully. Matching
       then continues at the outer level. If (*ACCEPT) in triggered in a posi-
       tive  assertion,  the  assertion succeeds; in a negative assertion, the
       assertion fails.

       If (*ACCEPT) is inside capturing parentheses, the data so far  is  cap-
       tured. For example:

         A((?:A|B(*ACCEPT)|C)D)

       This  matches  "AB", "AAD", or "ACD"; when it matches "AB", "B" is cap-
       tured by the outer parentheses.

         (*FAIL) or (*F)

       This verb causes a matching failure, forcing backtracking to occur.  It
       is  equivalent to (?!) but easier to read. The Perl documentation notes
       that it is probably useful only when combined  with  (?{})  or  (??{}).
       Those  are, of course, Perl features that are not present in PCRE2. The
       nearest equivalent is the callout feature, as for example in this  pat-
       tern:

         a+(?C)(*FAIL)

       A  match  with the string "aaaa" always fails, but the callout is taken
       before each backtrack happens (in this example, 10 times).

   Recording which path was taken

       There is one verb whose main purpose  is  to  track  how  a  match  was
       arrived  at,  though  it  also  has a secondary use in conjunction with
       advancing the match starting point (see (*SKIP) below).

         (*MARK:NAME) or (*:NAME)

       A name is always  required  with  this  verb.  There  may  be  as  many
       instances  of  (*MARK) as you like in a pattern, and their names do not
       have to be unique.

       When a match succeeds, the name of the  last-encountered  (*MARK:NAME),
       (*PRUNE:NAME),  or  (*THEN:NAME) on the matching path is passed back to
       the caller as described in  the  section  entitled  "Other  information
       about  the  match" in the pcre2api documentation. Here is an example of
       pcre2test output, where the "mark" modifier requests the retrieval  and
       outputting of (*MARK) data:

           re> /X(*MARK:A)Y|X(*MARK:B)Z/mark
         data> XY
          0: XY
         MK: A
         XZ
          0: XZ
         MK: B

       The (*MARK) name is tagged with "MK:" in this output, and in this exam-
       ple it indicates which of the two alternatives matched. This is a  more
       efficient  way of obtaining this information than putting each alterna-
       tive in its own capturing parentheses.

       If a verb with a name is encountered in a positive  assertion  that  is
       true,  the  name  is recorded and passed back if it is the last-encoun-
       tered. This does not happen for negative assertions or failing positive
       assertions.

       After  a  partial match or a failed match, the last encountered name in
       the entire match process is returned. For example:

           re> /X(*MARK:A)Y|X(*MARK:B)Z/mark
         data> XP
         No match, mark = B

       Note that in this unanchored example the  mark  is  retained  from  the
       match attempt that started at the letter "X" in the subject. Subsequent
       match attempts starting at "P" and then with an empty string do not get
       as far as the (*MARK) item, but nevertheless do not reset it.

       If  you  are  interested  in  (*MARK)  values after failed matches, you
       should probably set the PCRE2_NO_START_OPTIMIZE option (see  above)  to
       ensure that the match is always attempted.

   Verbs that act after backtracking

       The following verbs do nothing when they are encountered. Matching con-
       tinues with what follows, but if there is no subsequent match,  causing
       a  backtrack  to  the  verb, a failure is forced. That is, backtracking
       cannot pass to the left of the verb. However, when one of  these  verbs
       appears  inside  an  atomic  group or in an assertion that is true, its
       effect is confined to that group,  because  once  the  group  has  been
       matched,  there  is  never any backtracking into it. In this situation,
       backtracking has to jump to the left of  the  entire  atomic  group  or
       assertion.

       These  verbs  differ  in exactly what kind of failure occurs when back-
       tracking reaches them. The behaviour described below  is  what  happens
       when  the  verb is not in a subroutine or an assertion. Subsequent sec-
       tions cover these special cases.

         (*COMMIT)

       This verb, which may not be followed by a name, causes the whole  match
       to fail outright if there is a later matching failure that causes back-
       tracking to reach it. Even if the pattern  is  unanchored,  no  further
       attempts to find a match by advancing the starting point take place. If
       (*COMMIT) is the only backtracking verb that is  encountered,  once  it
       has  been  passed  pcre2_match() is committed to finding a match at the
       current starting point, or not at all. For example:

         a+(*COMMIT)b

       This matches "xxaab" but not "aacaab". It can be thought of as  a  kind
       of dynamic anchor, or "I've started, so I must finish." The name of the
       most recently passed (*MARK) in the path is passed back when  (*COMMIT)
       forces a match failure.

       If  there  is more than one backtracking verb in a pattern, a different
       one that follows (*COMMIT) may be triggered first,  so  merely  passing
       (*COMMIT) during a match does not always guarantee that a match must be
       at this starting point.

       Note that (*COMMIT) at the start of a pattern is not  the  same  as  an
       anchor,  unless PCRE2's start-of-match optimizations are turned off, as
       shown in this output from pcre2test:

           re> /(*COMMIT)abc/
         data> xyzabc
          0: abc
         data>
         re> /(*COMMIT)abc/no_start_optimize
         data> xyzabc
         No match

       For the first pattern, PCRE2 knows that any match must start with  "a",
       so  the optimization skips along the subject to "a" before applying the
       pattern to the first set of data. The match attempt then succeeds.  The
       second  pattern disables the optimization that skips along to the first
       character. The pattern is now applied  starting  at  "x",  and  so  the
       (*COMMIT)  causes  the  match to fail without trying any other starting
       points.

         (*PRUNE) or (*PRUNE:NAME)

       This verb causes the match to fail at the current starting position  in
       the subject if there is a later matching failure that causes backtrack-
       ing to reach it. If the pattern is unanchored, the  normal  "bumpalong"
       advance  to  the next starting character then happens. Backtracking can
       occur as usual to the left of (*PRUNE), before it is reached,  or  when
       matching  to  the  right  of  (*PRUNE), but if there is no match to the
       right, backtracking cannot cross (*PRUNE). In simple cases, the use  of
       (*PRUNE)  is just an alternative to an atomic group or possessive quan-
       tifier, but there are some uses of (*PRUNE) that cannot be expressed in
       any  other  way. In an anchored pattern (*PRUNE) has the same effect as
       (*COMMIT).

       The behaviour of (*PRUNE:NAME) is not the same as (*MARK:NAME)(*PRUNE).
       It is like (*MARK:NAME) in that the name is remembered for passing back
       to the caller. However, (*SKIP:NAME) searches only for names  set  with
       (*MARK), ignoring those set by (*PRUNE) or (*THEN).

         (*SKIP)

       This  verb, when given without a name, is like (*PRUNE), except that if
       the pattern is unanchored, the "bumpalong" advance is not to  the  next
       character, but to the position in the subject where (*SKIP) was encoun-
       tered. (*SKIP) signifies that whatever text was matched leading  up  to
       it cannot be part of a successful match. Consider:

         a+(*SKIP)b

       If  the  subject  is  "aaaac...",  after  the first match attempt fails
       (starting at the first character in the  string),  the  starting  point
       skips on to start the next attempt at "c". Note that a possessive quan-
       tifer does not have the same effect as this example; although it  would
       suppress  backtracking  during  the  first  match  attempt,  the second
       attempt would start at the second character instead of skipping  on  to
       "c".

         (*SKIP:NAME)

       When (*SKIP) has an associated name, its behaviour is modified. When it
       is triggered, the previous path through the pattern is searched for the
       most  recent  (*MARK)  that  has  the  same  name. If one is found, the
       "bumpalong" advance is to the subject position that corresponds to that
       (*MARK) instead of to where (*SKIP) was encountered. If no (*MARK) with
       a matching name is found, the (*SKIP) is ignored.

       Note that (*SKIP:NAME) searches only for names set by (*MARK:NAME).  It
       ignores names that are set by (*PRUNE:NAME) or (*THEN:NAME).

         (*THEN) or (*THEN:NAME)

       This  verb  causes  a skip to the next innermost alternative when back-
       tracking reaches it. That  is,  it  cancels  any  further  backtracking
       within  the  current  alternative.  Its name comes from the observation
       that it can be used for a pattern-based if-then-else block:

         ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...

       If the COND1 pattern matches, FOO is tried (and possibly further  items
       after  the  end  of the group if FOO succeeds); on failure, the matcher
       skips to the second alternative and tries COND2,  without  backtracking
       into  COND1.  If that succeeds and BAR fails, COND3 is tried. If subse-
       quently BAZ fails, there are no more alternatives, so there is a  back-
       track  to  whatever  came  before  the  entire group. If (*THEN) is not
       inside an alternation, it acts like (*PRUNE).

       The   behaviour   of   (*THEN:NAME)   is   the   not   the   same    as
       (*MARK:NAME)(*THEN).   It  is  like  (*MARK:NAME)  in  that the name is
       remembered for  passing  back  to  the  caller.  However,  (*SKIP:NAME)
       searches  only  for  names  set  with  (*MARK),  ignoring  those set by
       (*PRUNE) and (*THEN).

       A subpattern that does not contain a | character is just a part of  the
       enclosing  alternative;  it  is  not a nested alternation with only one
       alternative. The effect of (*THEN) extends beyond such a subpattern  to
       the  enclosing alternative. Consider this pattern, where A, B, etc. are
       complex pattern fragments that do not contain any | characters at  this
       level:

         A (B(*THEN)C) | D

       If  A and B are matched, but there is a failure in C, matching does not
       backtrack into A; instead it moves to the next alternative, that is, D.
       However,  if the subpattern containing (*THEN) is given an alternative,
       it behaves differently:

         A (B(*THEN)C | (*FAIL)) | D

       The effect of (*THEN) is now confined to the inner subpattern. After  a
       failure in C, matching moves to (*FAIL), which causes the whole subpat-
       tern to fail because there are no more alternatives  to  try.  In  this
       case, matching does now backtrack into A.

       Note  that  a  conditional  subpattern  is not considered as having two
       alternatives, because only one is ever used.  In  other  words,  the  |
       character in a conditional subpattern has a different meaning. Ignoring
       white space, consider:

         ^.*? (?(?=a) a | b(*THEN)c )

       If the subject is "ba", this pattern does not  match.  Because  .*?  is
       ungreedy,  it  initially  matches  zero characters. The condition (?=a)
       then fails, the character "b" is matched,  but  "c"  is  not.  At  this
       point,  matching does not backtrack to .*? as might perhaps be expected
       from the presence of the | character.  The  conditional  subpattern  is
       part of the single alternative that comprises the whole pattern, and so
       the match fails. (If there was a backtrack into  .*?,  allowing  it  to
       match "b", the match would succeed.)

       The  verbs just described provide four different "strengths" of control
       when subsequent matching fails. (*THEN) is the weakest, carrying on the
       match  at  the next alternative. (*PRUNE) comes next, failing the match
       at the current starting position, but allowing an advance to  the  next
       character  (for an unanchored pattern). (*SKIP) is similar, except that
       the advance may be more than one character. (*COMMIT) is the strongest,
       causing the entire match to fail.

   More than one backtracking verb

       If  more  than  one  backtracking verb is present in a pattern, the one
       that is backtracked onto first acts. For example,  consider  this  pat-
       tern, where A, B, etc. are complex pattern fragments:

         (A(*COMMIT)B(*THEN)C|ABD)

       If  A matches but B fails, the backtrack to (*COMMIT) causes the entire
       match to fail. However, if A and B match, but C fails, the backtrack to
       (*THEN)  causes  the next alternative (ABD) to be tried. This behaviour
       is consistent, but is not always the same as Perl's. It means  that  if
       two  or  more backtracking verbs appear in succession, all the the last
       of them has no effect. Consider this example:

         ...(*COMMIT)(*PRUNE)...

       If there is a matching failure to the right, backtracking onto (*PRUNE)
       causes  it to be triggered, and its action is taken. There can never be
       a backtrack onto (*COMMIT).

   Backtracking verbs in repeated groups

       PCRE2 differs from Perl  in  its  handling  of  backtracking  verbs  in
       repeated groups. For example, consider:

         /(a(*COMMIT)b)+ac/

       If  the  subject  is  "abac", Perl matches, but PCRE2 fails because the
       (*COMMIT) in the second repeat of the group acts.

   Backtracking verbs in assertions

       (*FAIL) in any assertion has its normal effect: it forces an  immediate
       backtrack.  The  behaviour  of  the other backtracking verbs depends on
       whether or not the assertion is standalone or acting as  the  condition
       in a conditional subpattern.

       (*ACCEPT)  in  a  standalone positive assertion causes the assertion to
       succeed without any further processing; captured strings are  retained.
       In  a  standalone negative assertion, (*ACCEPT) causes the assertion to
       fail without any further processing; captured substrings are discarded.

       If the assertion is a condition, (*ACCEPT) causes the condition  to  be
       true  for  a  positive assertion and false for a negative one; captured
       substrings are retained in both cases.

       The effect of (*THEN) is not allowed to escape beyond an assertion.  If
       there  are no more branches to try, (*THEN) causes a positive assertion
       to be false, and a negative assertion to be true.

       The other backtracking verbs are not treated specially if  they  appear
       in  a  standalone  positive assertion. In a conditional positive asser-
       tion, backtracking into (*COMMIT), (*SKIP), or (*PRUNE) causes the con-
       dition  to be false. However, for both standalone and conditional nega-
       tive assertions, backtracking  into  (*COMMIT),  (*SKIP),  or  (*PRUNE)
       causes the assertion to be true, without considering any further alter-
       native branches.

   Backtracking verbs in subroutines

       These behaviours occur whether or not the subpattern is  called  recur-
       sively.  Perl's treatment of subroutines is different in some cases.

       (*FAIL)  in  a subpattern called as a subroutine has its normal effect:
       it forces an immediate backtrack.

       (*ACCEPT) in a subpattern called as a subroutine causes the  subroutine
       match  to succeed without any further processing. Matching then contin-
       ues after the subroutine call.

       (*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine
       cause the subroutine match to fail.

       (*THEN)  skips to the next alternative in the innermost enclosing group
       within the subpattern that has alternatives. If there is no such  group
       within the subpattern, (*THEN) causes the subroutine match to fail.


SEE ALSO

       pcre2api(3),    pcre2callout(3),    pcre2matching(3),   pcre2syntax(3),
       pcre2(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 05 July 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2PERFORM(3)            Library Functions Manual            PCRE2PERFORM(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 PERFORMANCE

       Two  aspects  of performance are discussed below: memory usage and pro-
       cessing time. The way you express your pattern as a regular  expression
       can affect both of them.


COMPILED PATTERN MEMORY USAGE

       Patterns are compiled by PCRE2 into a reasonably efficient interpretive
       code, so that most simple patterns do not use much memory  for  storing
       the compiled version. However, there is one case where the memory usage
       of a compiled pattern can be unexpectedly  large.  If  a  parenthesized
       subpattern has a quantifier with a minimum greater than 1 and/or a lim-
       ited maximum, the whole subpattern is repeated in  the  compiled  code.
       For example, the pattern

         (abc|def){2,4}

       is compiled as if it were

         (abc|def)(abc|def)((abc|def)(abc|def)?)?

       (Technical  aside:  It is done this way so that backtrack points within
       each of the repetitions can be independently maintained.)

       For regular expressions whose quantifiers use only small numbers,  this
       is  not  usually a problem. However, if the numbers are large, and par-
       ticularly if such repetitions are nested, the memory usage  can  become
       an embarrassment. For example, the very simple pattern

         ((ab){1,1000}c){1,3}

       uses  over  50K bytes when compiled using the 8-bit library. When PCRE2
       is compiled with its default internal pointer size of  two  bytes,  the
       size  limit  on  a  compiled pattern is 64K code units in the 8-bit and
       16-bit libraries, and this is reached with the  above  pattern  if  the
       outer repetition is increased from 3 to 4. PCRE2 can be compiled to use
       larger internal pointers and thus handle larger compiled patterns,  but
       it  is  better to try to rewrite your pattern to use less memory if you
       can.

       One way of reducing the memory usage for such patterns is to  make  use
       of PCRE2's "subroutine" facility. Re-writing the above pattern as

         ((ab)(?2){0,999}c)(?1){0,2}

       reduces  the  memory  requirements to around 16K, and indeed it remains
       under 20K even with the outer repetition  increased  to  100.  However,
       this kind of pattern is not always exactly equivalent, because any cap-
       tures within subroutine calls are lost when the  subroutine  completes.
       If  this  is  not  a  problem, this kind of rewriting will allow you to
       process patterns that PCRE2 cannot otherwise handle. The matching  per-
       formance  of  the two different versions of the pattern are roughly the
       same. (This applies from release 10.30 - things were different in  ear-
       lier releases.)


STACK AND HEAP USAGE AT RUN TIME

       From release 10.30, the interpretive (non-JIT) version of pcre2_match()
       uses very little system stack at run time. In earlier  releases  recur-
       sive  function  calls  could  use a great deal of stack, and this could
       cause problems, but this usage has been eliminated. Backtracking  posi-
       tions  are now explicitly remembered in memory frames controlled by the
       code. An initial 20K vector of frames is allocated on the system  stack
       (enough for about 100 frames for small patterns), but if this is insuf-
       ficient, heap memory is used. The amount of heap memory can be limited;
       if  the  limit  is  set to zero, only the initial stack vector is used.
       Rewriting patterns to be time-efficient, as described below,  may  also
       reduce the memory requirements.

       In  contrast  to  pcre2_match(),  pcre2_dfa_match()  does use recursive
       function calls, but  only  for  processing  atomic  groups,  lookaround
       assertions, and recursion within the pattern. Too much nested recursion
       may cause stack issues. The "match depth"  parameter  can  be  used  to
       limit the depth of function recursion in pcre2_dfa_match().


PROCESSING TIME

       Certain  items  in regular expression patterns are processed more effi-
       ciently than others. It is more efficient to use a character class like
       [aeiou]   than   a   set   of  single-character  alternatives  such  as
       (a|e|i|o|u). In general, the simplest construction  that  provides  the
       required behaviour is usually the most efficient. Jeffrey Friedl's book
       contains a lot of useful general discussion  about  optimizing  regular
       expressions  for  efficient  performance.  This document contains a few
       observations about PCRE2.

       Using Unicode character properties (the \p,  \P,  and  \X  escapes)  is
       slow,  because  PCRE2 has to use a multi-stage table lookup whenever it
       needs a character's property. If you can find  an  alternative  pattern
       that does not use character properties, it will probably be faster.

       By  default,  the  escape  sequences  \b, \d, \s, and \w, and the POSIX
       character classes such as [:alpha:]  do  not  use  Unicode  properties,
       partly for backwards compatibility, and partly for performance reasons.
       However, you can set the PCRE2_UCP option or  start  the  pattern  with
       (*UCP)  if  you  want Unicode character properties to be used. This can
       double the matching time for  items  such  as  \d,  when  matched  with
       pcre2_match();  the  performance loss is less with a DFA matching func-
       tion, and in both cases there is not much difference for \b.

       When a pattern begins with .* not in atomic parentheses, nor in  paren-
       theses  that  are  the subject of a backreference, and the PCRE2_DOTALL
       option is set, the pattern is implicitly anchored by  PCRE2,  since  it
       can  match  only  at  the start of a subject string. If the pattern has
       multiple top-level branches, they must all be anchorable. The optimiza-
       tion  can  be  disabled  by  the PCRE2_NO_DOTSTAR_ANCHOR option, and is
       automatically disabled if the pattern contains (*PRUNE) or (*SKIP).

       If PCRE2_DOTALL is  not  set,  PCRE2  cannot  make  this  optimization,
       because the dot metacharacter does not then match a newline, and if the
       subject string contains newlines, the pattern may match from the  char-
       acter immediately following one of them instead of from the very start.
       For example, the pattern

         .*second

       matches the subject "first\nand second" (where \n stands for a  newline
       character),  with the match starting at the seventh character. In order
       to do this, PCRE2 has to retry the match starting after  every  newline
       in the subject.

       If  you  are using such a pattern with subject strings that do not con-
       tain  newlines,  the  best   performance   is   obtained   by   setting
       PCRE2_DOTALL,  or  starting  the  pattern  with ^.* or ^.*? to indicate
       explicit anchoring. That saves PCRE2 from having to scan along the sub-
       ject looking for a newline to restart at.

       Beware  of  patterns  that contain nested indefinite repeats. These can
       take a long time to run when applied to a string that does  not  match.
       Consider the pattern fragment

         ^(a+)*

       This  can  match "aaaa" in 16 different ways, and this number increases
       very rapidly as the string gets longer. (The * repeat can match  0,  1,
       2,  3, or 4 times, and for each of those cases other than 0 or 4, the +
       repeats can match different numbers of times.) When  the  remainder  of
       the  pattern  is such that the entire match is going to fail, PCRE2 has
       in principle to try every possible variation,  and  this  can  take  an
       extremely long time, even for relatively short strings.

       An optimization catches some of the more simple cases such as

         (a+)*b

       where  a  literal  character  follows. Before embarking on the standard
       matching procedure, PCRE2 checks that there is a "b" later in the  sub-
       ject  string, and if there is not, it fails the match immediately. How-
       ever, when there is no following literal this  optimization  cannot  be
       used. You can see the difference by comparing the behaviour of

         (a+)*\d

       with  the  pattern  above.  The former gives a failure almost instantly
       when applied to a whole line of  "a"  characters,  whereas  the  latter
       takes an appreciable time with strings longer than about 20 characters.

       In many cases, the solution to this kind of performance issue is to use
       an atomic group or a possessive quantifier. This can often reduce  mem-
       ory requirements as well. As another example, consider this pattern:

         ([^<]|<(?!inet))+

       It  matches  from wherever it starts until it encounters "<inet" or the
       end of the data, and is the kind of pattern that  might  be  used  when
       processing an XML file. Each iteration of the outer parentheses matches
       either one character that is not "<" or a "<" that is not  followed  by
       "inet".  However,  each time a parenthesis is processed, a backtracking
       position is passed, so this formulation uses a memory  frame  for  each
       matched character. For a long string, a lot of memory is required. Con-
       sider now this  rewritten  pattern,  which  matches  exactly  the  same
       strings:

         ([^<]++|<(?!inet))+

       This runs much faster, because sequences of characters that do not con-
       tain "<" are "swallowed" in one item inside the parentheses, and a pos-
       sessive  quantifier  is  used to stop any backtracking into the runs of
       non-"<" characters. This version also uses a lot  less  memory  because
       entry  to  a  new  set of parentheses happens only when a "<" character
       that is not followed by "inet" is encountered (and we  assume  this  is
       relatively rare).

       This example shows that one way of optimizing performance when matching
       long subject strings is to write repeated parenthesized subpatterns  to
       match more than one character whenever possible.

   SETTING RESOURCE LIMITS

       You  can  set  limits on the amount of processing that takes place when
       matching, and on the amount of heap memory that is  used.  The  default
       values of the limits are very large, and unlikely ever to operate. They
       can be changed when PCRE2 is built, and  they  can  also  be  set  when
       pcre2_match()  or  pcre2_dfa_match()  is  called.  For details of these
       interfaces, see the pcre2build documentation and the  section  entitled
       "The match context" in the pcre2api documentation.

       The  pcre2test  test program has a modifier called "find_limits" which,
       if applied to a subject line, causes it to  find  the  smallest  limits
       that allow a pattern to match. This is done by repeatedly matching with
       different limits.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 08 April 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2POSIX(3)              Library Functions Manual              PCRE2POSIX(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

SYNOPSIS

       #include <pcre2posix.h>

       int regcomp(regex_t *preg, const char *pattern,
            int cflags);

       int regexec(const regex_t *preg, const char *string,
            size_t nmatch, regmatch_t pmatch[], int eflags);

       size_t regerror(int errcode, const regex_t *preg,
            char *errbuf, size_t errbuf_size);

       void regfree(regex_t *preg);


DESCRIPTION

       This  set of functions provides a POSIX-style API for the PCRE2 regular
       expression 8-bit library. See the pcre2api documentation for a descrip-
       tion  of PCRE2's native API, which contains much additional functional-
       ity. There are no POSIX-style wrappers for PCRE2's  16-bit  and  32-bit
       libraries.

       The functions described here are just wrapper functions that ultimately
       call the  PCRE2  native  API.  Their  prototypes  are  defined  in  the
       pcre2posix.h  header  file,  and  on Unix systems the library itself is
       called libpcre2-posix.a, so can be accessed by adding -lpcre2-posix  to
       the  command  for  linking  an  application that uses them. Because the
       POSIX functions call the native ones,  it  is  also  necessary  to  add
       -lpcre2-8.

       Those  POSIX  option bits that can reasonably be mapped to PCRE2 native
       options have been implemented. In addition, the option REG_EXTENDED  is
       defined  with  the  value  zero. This has no effect, but since programs
       that are written to the POSIX interface often use  it,  this  makes  it
       easier  to  slot in PCRE2 as a replacement library. Other POSIX options
       are not even defined.

       There are also some options that are not defined by POSIX.  These  have
       been  added  at  the  request  of users who want to make use of certain
       PCRE2-specific features via the POSIX calling interface or to  add  BSD
       or GNU functionality.

       When  PCRE2  is  called via these functions, it is only the API that is
       POSIX-like in style. The syntax and semantics of  the  regular  expres-
       sions  themselves  are  still  those of Perl, subject to the setting of
       various PCRE2 options, as described below. "POSIX-like in style"  means
       that  the  API  approximates  to  the POSIX definition; it is not fully
       POSIX-compatible, and in multi-unit encoding  domains  it  is  probably
       even less compatible.

       The header for these functions is supplied as pcre2posix.h to avoid any
       potential clash with other POSIX  libraries.  It  can,  of  course,  be
       renamed or aliased as regex.h, which is the "correct" name. It provides
       two structure types, regex_t for  compiled  internal  forms,  and  reg-
       match_t  for  returning  captured substrings. It also defines some con-
       stants whose names start  with  "REG_";  these  are  used  for  setting
       options and identifying error codes.


COMPILING A PATTERN

       The  function regcomp() is called to compile a pattern into an internal
       form. By default, the pattern is a C string terminated by a binary zero
       (but  see  REG_PEND below). The preg argument is a pointer to a regex_t
       structure that is used as a base for storing information about the com-
       piled  regular  expression. (It is also used for input when REG_PEND is
       set.)

       The argument cflags is either zero, or contains one or more of the bits
       defined by the following macros:

         REG_DOTALL

       The  PCRE2_DOTALL  option  is set when the regular expression is passed
       for compilation to the native function. Note  that  REG_DOTALL  is  not
       part of the POSIX standard.

         REG_ICASE

       The  PCRE2_CASELESS option is set when the regular expression is passed
       for compilation to the native function.

         REG_NEWLINE

       The PCRE2_MULTILINE option is set when the regular expression is passed
       for  compilation  to the native function. Note that this does not mimic
       the defined POSIX behaviour for REG_NEWLINE  (see  the  following  sec-
       tion).

         REG_NOSPEC

       The  PCRE2_LITERAL  option is set when the regular expression is passed
       for compilation to the native function. This disables all meta  charac-
       ters  in the pattern, causing it to be treated as a literal string. The
       only other options that are  allowed  with  REG_NOSPEC  are  REG_ICASE,
       REG_NOSUB,  REG_PEND,  and REG_UTF. Note that REG_NOSPEC is not part of
       the POSIX standard.

         REG_NOSUB

       When a pattern that is compiled with this flag is passed  to  regexec()
       for  matching, the nmatch and pmatch arguments are ignored, and no cap-
       tured strings are returned. Versions of the PCRE library prior to 10.22
       used  to  set  the  PCRE2_NO_AUTO_CAPTURE  compile  option, but this no
       longer happens because it disables the use of back references.

         REG_PEND

       If this option is set, the reg_endp field in the preg structure  (which
       has the type const char *) must be set to point to the character beyond
       the end of the pattern before calling regcomp(). The pattern itself may
       now  contain binary zeroes, which are treated as data characters. With-
       out REG_PEND, a binary zero terminates  the  pattern  and  the  re_endp
       field  is  ignored.  This  is a GNU extension to the POSIX standard and
       should be used with caution in software  intended  to  be  portable  to
       other systems.

         REG_UCP

       The  PCRE2_UCP  option is set when the regular expression is passed for
       compilation to the native function. This causes PCRE2  to  use  Unicode
       properties  when  matchine  \d,  \w,  etc., instead of just recognizing
       ASCII values. Note that REG_UCP is not part of the POSIX standard.

         REG_UNGREEDY

       The PCRE2_UNGREEDY option is set when the regular expression is  passed
       for  compilation  to the native function. Note that REG_UNGREEDY is not
       part of the POSIX standard.

         REG_UTF

       The PCRE2_UTF option is set when the regular expression is  passed  for
       compilation  to the native function. This causes the pattern itself and
       all data strings used for matching it to be treated as  UTF-8  strings.
       Note that REG_UTF is not part of the POSIX standard.

       In  the  absence  of  these  flags, no options are passed to the native
       function.  This means the the regex  is  compiled  with  PCRE2  default
       semantics.  In particular, the way it handles newline characters in the
       subject string is the Perl way, not the POSIX way.  Note  that  setting
       PCRE2_MULTILINE has only some of the effects specified for REG_NEWLINE.
       It does not affect the way newlines are matched by the dot  metacharac-
       ter (they are not) or by a negative class such as [^a] (they are).

       The  yield of regcomp() is zero on success, and non-zero otherwise. The
       preg structure is filled in on success, and one  other  member  of  the
       structure  (as  well as re_endp) is public: re_nsub contains the number
       of capturing subpatterns in the regular expression. Various error codes
       are defined in the header file.

       NOTE:  If  the  yield of regcomp() is non-zero, you must not attempt to
       use the contents of the preg structure. If, for example, you pass it to
       regexec(), the result is undefined and your program is likely to crash.


MATCHING NEWLINE CHARACTERS

       This area is not simple, because POSIX and Perl take different views of
       things.  It is not possible to get PCRE2 to obey POSIX  semantics,  but
       then PCRE2 was never intended to be a POSIX engine. The following table
       lists the different possibilities for matching  newline  characters  in
       Perl and PCRE2:

                                 Default   Change with

         . matches newline          no     PCRE2_DOTALL
         newline matches [^a]       yes    not changeable
         $ matches \n at end        yes    PCRE2_DOLLAR_ENDONLY
         $ matches \n in middle     no     PCRE2_MULTILINE
         ^ matches \n in middle     no     PCRE2_MULTILINE

       This is the equivalent table for a POSIX-compatible pattern matcher:

                                 Default   Change with

         . matches newline          yes    REG_NEWLINE
         newline matches [^a]       yes    REG_NEWLINE
         $ matches \n at end        no     REG_NEWLINE
         $ matches \n in middle     no     REG_NEWLINE
         ^ matches \n in middle     no     REG_NEWLINE

       This  behaviour  is not what happens when PCRE2 is called via its POSIX
       API. By default, PCRE2's behaviour is the same as Perl's,  except  that
       there  is no equivalent for PCRE2_DOLLAR_ENDONLY in Perl. In both PCRE2
       and Perl, there is no way to stop newline from matching [^a].

       Default POSIX newline handling can be obtained by setting  PCRE2_DOTALL
       and  PCRE2_DOLLAR_ENDONLY  when  calling  pcre2_compile() directly, but
       there is no way to make PCRE2 behave exactly  as  for  the  REG_NEWLINE
       action.  When  using the POSIX API, passing REG_NEWLINE to PCRE2's reg-
       comp() function causes PCRE2_MULTILINE to be passed to pcre2_compile(),
       and  REG_DOTALL passes PCRE2_DOTALL. There is no way to pass PCRE2_DOL-
       LAR_ENDONLY.


MATCHING A PATTERN

       The function regexec() is called  to  match  a  compiled  pattern  preg
       against  a  given string, which is by default terminated by a zero byte
       (but see REG_STARTEND below), subject to the options in  eflags.  These
       can be:

         REG_NOTBOL

       The PCRE2_NOTBOL option is set when calling the underlying PCRE2 match-
       ing function.

         REG_NOTEMPTY

       The PCRE2_NOTEMPTY option is set  when  calling  the  underlying  PCRE2
       matching  function.  Note  that  REG_NOTEMPTY  is not part of the POSIX
       standard. However, setting this option can give more POSIX-like  behav-
       iour in some situations.

         REG_NOTEOL

       The PCRE2_NOTEOL option is set when calling the underlying PCRE2 match-
       ing function.

         REG_STARTEND

       When this option is set, the subject  string  is  starts  at  string  +
       pmatch[0].rm_so  and  ends  at  string  + pmatch[0].rm_eo, which should
       point to the first character beyond the string.  There  may  be  binary
       zeroes within the subject string, and indeed, using REG_STARTEND is the
       only way to pass a subject string that contains a binary zero.

       Whatever the value of  pmatch[0].rm_so,  the  offsets  of  the  matched
       string  and  any  captured  substrings  are still given relative to the
       start of string itself. (Before PCRE2 release 10.30  these  were  given
       relative  to  string  +  pmatch[0].rm_so,  but  this differs from other
       implementations.)

       This is a BSD extension, compatible with  but  not  specified  by  IEEE
       Standard  1003.2 (POSIX.2), and should be used with caution in software
       intended to be portable to other systems. Note that  a  non-zero  rm_so
       does  not  imply REG_NOTBOL; REG_STARTEND affects only the location and
       length of the string, not how it is matched. Setting  REG_STARTEND  and
       passing  pmatch as NULL are mutually exclusive; the error REG_INVARG is
       returned.

       If the pattern was compiled with the REG_NOSUB flag, no data about  any
       matched  strings  is  returned.  The  nmatch  and  pmatch  arguments of
       regexec() are ignored (except possibly as input for REG_STARTEND).

       The value of nmatch may be zero, and  the  value  pmatch  may  be  NULL
       (unless  REG_STARTEND  is  set);  in both these cases no data about any
       matched strings is returned.

       Otherwise, the portion of the string that was  matched,  and  also  any
       captured substrings, are returned via the pmatch argument, which points
       to an array of nmatch structures of  type  regmatch_t,  containing  the
       members  rm_so  and  rm_eo.  These contain the byte offset to the first
       character of each substring and the offset to the first character after
       the  end of each substring, respectively. The 0th element of the vector
       relates to the entire portion of string that  was  matched;  subsequent
       elements relate to the capturing subpatterns of the regular expression.
       Unused entries in the array have both structure members set to -1.

       A successful match yields  a  zero  return;  various  error  codes  are
       defined  in  the  header  file,  of which REG_NOMATCH is the "expected"
       failure code.


ERROR MESSAGES

       The regerror() function maps a non-zero errorcode from either regcomp()
       or  regexec()  to  a  printable message. If preg is not NULL, the error
       should have arisen from the use of that structure. A message terminated
       by  a binary zero is placed in errbuf. If the buffer is too short, only
       the first errbuf_size - 1 characters of the error message are used. The
       yield  of  the  function is the size of buffer needed to hold the whole
       message, including the terminating zero. This  value  is  greater  than
       errbuf_size if the message was truncated.


MEMORY USAGE

       Compiling  a regular expression causes memory to be allocated and asso-
       ciated with the preg structure. The function regfree() frees  all  such
       memory,  after  which  preg may no longer be used as a compiled expres-
       sion.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 15 June 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2SAMPLE(3)             Library Functions Manual             PCRE2SAMPLE(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 SAMPLE PROGRAM

       A  simple, complete demonstration program to get you started with using
       PCRE2 is supplied in the file pcre2demo.c in the src directory  in  the
       PCRE2 distribution. A listing of this program is given in the pcre2demo
       documentation. If you do not have a copy of the PCRE2 distribution, you
       can save this listing to re-create the contents of pcre2demo.c.

       The  demonstration  program compiles the regular expression that is its
       first argument, and matches it against the subject string in its second
       argument.  No  PCRE2  options are set, and default character tables are
       used. If matching succeeds, the program outputs the portion of the sub-
       ject  that  matched,  together  with  the contents of any captured sub-
       strings.

       If the -g option is given on the command line, the program then goes on
       to check for further matches of the same regular expression in the same
       subject string. The logic is a little bit tricky because of the  possi-
       bility  of  matching an empty string. Comments in the code explain what
       is going on.

       The code in pcre2demo.c is an 8-bit program that uses the  PCRE2  8-bit
       library.  It  handles  strings  and characters that are stored in 8-bit
       code units.  By default, one character corresponds to  one  code  unit,
       but  if  the  pattern starts with "(*UTF)", both it and the subject are
       treated as UTF-8 strings, where characters  may  occupy  multiple  code
       units.

       If  PCRE2  is installed in the standard include and library directories
       for your operating system, you should be able to compile the demonstra-
       tion program using a command like this:

         cc -o pcre2demo pcre2demo.c -lpcre2-8

       If PCRE2 is installed elsewhere, you may need to add additional options
       to the command line. For example, on a Unix-like system that has  PCRE2
       installed  in  /usr/local,  you  can  compile the demonstration program
       using a command like this:

         cc -o pcre2demo -I/usr/local/include pcre2demo.c \
            -L/usr/local/lib -lpcre2-8

       Once you have built the demonstration program, you can run simple tests
       like this:

         ./pcre2demo 'cat|dog' 'the cat sat on the mat'
         ./pcre2demo -g 'cat|dog' 'the dog sat on the cat'

       Note  that  there  is  a  much  more comprehensive test program, called
       pcre2test, which supports many  more  facilities  for  testing  regular
       expressions using all three PCRE2 libraries (8-bit, 16-bit, and 32-bit,
       though not all three need be installed). The pcre2demo program is  pro-
       vided as a relatively simple coding example.

       If you try to run pcre2demo when PCRE2 is not installed in the standard
       library directory, you may get an error like  this  on  some  operating
       systems (e.g. Solaris):

         ld.so.1: pcre2demo: fatal: libpcre2-8.so.0: open failed: No such file
       or directory

       This is caused by the way shared library support works  on  those  sys-
       tems. You need to add

         -R/usr/local/lib

       (for example) to the compile command to get round this problem.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 02 February 2016
       Copyright (c) 1997-2016 University of Cambridge.
------------------------------------------------------------------------------
PCRE2SERIALIZE(3)          Library Functions Manual          PCRE2SERIALIZE(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

SAVING AND RE-USING PRECOMPILED PCRE2 PATTERNS

       int32_t pcre2_serialize_decode(pcre2_code **codes,
         int32_t number_of_codes, const uint32_t *bytes,
         pcre2_general_context *gcontext);

       int32_t pcre2_serialize_encode(pcre2_code **codes,
         int32_t number_of_codes, uint32_t **serialized_bytes,
         PCRE2_SIZE *serialized_size, pcre2_general_context *gcontext);

       void pcre2_serialize_free(uint8_t *bytes);

       int32_t pcre2_serialize_get_number_of_codes(const uint8_t *bytes);

       If  you  are running an application that uses a large number of regular
       expression patterns, it may be useful to store them  in  a  precompiled
       form  instead  of  having to compile them every time the application is
       run. However, if you are using the just-in-time  optimization  feature,
       it is not possible to save and reload the JIT data, because it is posi-
       tion-dependent. The host on which the patterns  are  reloaded  must  be
       running  the  same version of PCRE2, with the same code unit width, and
       must also have the same endianness, pointer width and PCRE2_SIZE  type.
       For  example, patterns compiled on a 32-bit system using PCRE2's 16-bit
       library cannot be reloaded on a 64-bit system, nor can they be reloaded
       using the 8-bit library.


SECURITY CONCERNS

       The facility for saving and restoring compiled patterns is intended for
       use within individual applications.  As  such,  the  data  supplied  to
       pcre2_serialize_decode()  is expected to be trusted data, not data from
       arbitrary external sources.  There  is  only  some  simple  consistency
       checking, not complete validation of what is being re-loaded. Corrupted
       data may cause undefined results. For example, if the length field of a
       pattern in the serialized data is corrupted, the deserializing code may
       read beyond the end of the byte stream that is passed to it.


SAVING COMPILED PATTERNS

       Before compiled patterns can be saved they must be serialized, that is,
       converted  to  a  stream of bytes. A single byte stream may contain any
       number of compiled patterns, but they must all use the  same  character
       tables. A single copy of the tables is included in the byte stream (its
       size is 1088 bytes). For more details of character tables, see the sec-
       tion on locale support in the pcre2api documentation.

       The  function pcre2_serialize_encode() creates a serialized byte stream
       from a list of compiled patterns. Its first two arguments  specify  the
       list, being a pointer to a vector of pointers to compiled patterns, and
       the length of the vector. The third and fourth arguments point to vari-
       ables which are set to point to the created byte stream and its length,
       respectively. The final argument is a pointer  to  a  general  context,
       which  can  be  used to specify custom memory mangagement functions. If
       this argument is NULL, malloc() is used to obtain memory for  the  byte
       stream. The yield of the function is the number of serialized patterns,
       or one of the following negative error codes:

         PCRE2_ERROR_BADDATA      the number of patterns is zero or less
         PCRE2_ERROR_BADMAGIC     mismatch of id bytes in one of the patterns
         PCRE2_ERROR_MEMORY       memory allocation failed
         PCRE2_ERROR_MIXEDTABLES  the patterns do not all use the same tables
         PCRE2_ERROR_NULL         the 1st, 3rd, or 4th argument is NULL

       PCRE2_ERROR_BADMAGIC means either that a pattern's code has  been  cor-
       rupted,  or that a slot in the vector does not point to a compiled pat-
       tern.

       Once a set of patterns has been serialized you can save the data in any
       appropriate  manner. Here is sample code that compiles two patterns and
       writes them to a file. It assumes that the variable fd refers to a file
       that is open for output. The error checking that should be present in a
       real application has been omitted for simplicity.

         int errorcode;
         uint8_t *bytes;
         PCRE2_SIZE erroroffset;
         PCRE2_SIZE bytescount;
         pcre2_code *list_of_codes[2];
         list_of_codes[0] = pcre2_compile("first pattern",
           PCRE2_ZERO_TERMINATED, 0, &errorcode, &erroroffset, NULL);
         list_of_codes[1] = pcre2_compile("second pattern",
           PCRE2_ZERO_TERMINATED, 0, &errorcode, &erroroffset, NULL);
         errorcode = pcre2_serialize_encode(list_of_codes, 2, &bytes,
           &bytescount, NULL);
         errorcode = fwrite(bytes, 1, bytescount, fd);

       Note that the serialized data is binary data that may  contain  any  of
       the  256  possible  byte  values.  On  systems  that make a distinction
       between binary and non-binary data, be sure that the file is opened for
       binary output.

       Serializing  a  set  of patterns leaves the original data untouched, so
       they can still be used for matching. Their memory  must  eventually  be
       freed in the usual way by calling pcre2_code_free(). When you have fin-
       ished with the byte stream, it too must be freed by calling pcre2_seri-
       alize_free().


RE-USING PRECOMPILED PATTERNS

       In  order  to  re-use  a  set of saved patterns you must first make the
       serialized byte stream available in main memory (for example, by  read-
       ing  from  a  file).  The  management of this memory block is up to the
       application.  You  can  use  the  pcre2_serialize_get_number_of_codes()
       function  to  find out how many compiled patterns are in the serialized
       data without actually decoding the patterns:

         uint8_t *bytes = <serialized data>;
         int32_t number_of_codes = pcre2_serialize_get_number_of_codes(bytes);

       The pcre2_serialize_decode() function reads a byte stream and recreates
       the compiled patterns in new memory blocks, setting pointers to them in
       a vector. The first two arguments are a pointer to  a  suitable  vector
       and  its  length,  and  the third argument points to a byte stream. The
       final argument is a pointer to a general context, which can be used  to
       specify  custom  memory mangagement functions for the decoded patterns.
       If this argument is NULL, malloc() and free() are used. After deserial-
       ization, the byte stream is no longer needed and can be discarded.

         int32_t number_of_codes;
         pcre2_code *list_of_codes[2];
         uint8_t *bytes = <serialized data>;
         int32_t number_of_codes =
           pcre2_serialize_decode(list_of_codes, 2, bytes, NULL);

       If  the  vector  is  not  large enough for all the patterns in the byte
       stream, it is filled  with  those  that  fit,  and  the  remainder  are
       ignored.  The  yield of the function is the number of decoded patterns,
       or one of the following negative error codes:

         PCRE2_ERROR_BADDATA    second argument is zero or less
         PCRE2_ERROR_BADMAGIC   mismatch of id bytes in the data
         PCRE2_ERROR_BADMODE    mismatch of code unit size or PCRE2 version
         PCRE2_ERROR_BADSERIALIZEDDATA  other sanity check failure
         PCRE2_ERROR_MEMORY     memory allocation failed
         PCRE2_ERROR_NULL       first or third argument is NULL

       PCRE2_ERROR_BADMAGIC may mean that the data is corrupt, or that it  was
       compiled on a system with different endianness.

       Decoded patterns can be used for matching in the usual way, and must be
       freed by calling pcre2_code_free(). However, be aware that there  is  a
       potential  race  issue  if  you  are  using multiple patterns that were
       decoded from a single byte stream in  a  multithreaded  application.  A
       single copy of the character tables is used by all the decoded patterns
       and a reference count is used to arrange for its memory to be automati-
       cally  freed when the last pattern is freed, but there is no locking on
       this reference count. Therefore, if you want to call  pcre2_code_free()
       for  these  patterns  in  different  threads, you must arrange your own
       locking, and ensure that pcre2_code_free()  cannot  be  called  by  two
       threads at the same time.

       If  a pattern was processed by pcre2_jit_compile() before being serial-
       ized, the JIT data is discarded and so is no longer available  after  a
       save/restore  cycle.  You can, however, process a restored pattern with
       pcre2_jit_compile() if you wish.


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 21 March 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2SYNTAX(3)             Library Functions Manual             PCRE2SYNTAX(3)



NAME
       PCRE2 - Perl-compatible regular expressions (revised API)

PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY

       The  full syntax and semantics of the regular expressions that are sup-
       ported by PCRE2 are described in the pcre2pattern  documentation.  This
       document contains a quick-reference summary of the syntax.


QUOTING

         \x         where x is non-alphanumeric is a literal x
         \Q...\E    treat enclosed characters as literal


ESCAPED CHARACTERS

       This table applies to ASCII and Unicode environments.

         \a         alarm, that is, the BEL character (hex 07)
         \cx        "control-x", where x is any ASCII printing character
         \e         escape (hex 1B)
         \f         form feed (hex 0C)
         \n         newline (hex 0A)
         \r         carriage return (hex 0D)
         \t         tab (hex 09)
         \0dd       character with octal code 0dd
         \ddd       character with octal code ddd, or backreference
         \o{ddd..}  character with octal code ddd..
         \U         "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
         \uhhhh     character with hex code hhhh (if PCRE2_ALT_BSUX is set)
         \xhh       character with hex code hh
         \x{hhh..}  character with hex code hhh..

       Note that \0dd is always an octal code. The treatment of backslash fol-
       lowed by a non-zero digit is complicated; for details see  the  section
       "Non-printing  characters"  in  the  pcre2pattern  documentation, where
       details of escape processing in EBCDIC environments are also given.

       When \x is not followed by {, from zero to two hexadecimal  digits  are
       read, but if PCRE2_ALT_BSUX is set, \x must be followed by two hexadec-
       imal digits to be recognized as  a  hexadecimal  escape;  otherwise  it
       matches  a literal "x".  Likewise, if \u (in ALT_BSUX mode) is not fol-
       lowed by four hexadecimal digits, it matches a literal "u".


CHARACTER TYPES

         .          any character except newline;
                      in dotall mode, any character whatsoever
         \C         one code unit, even in UTF mode (best avoided)
         \d         a decimal digit
         \D         a character that is not a decimal digit
         \h         a horizontal white space character
         \H         a character that is not a horizontal white space character
         \N         a character that is not a newline
         \p{xx}     a character with the xx property
         \P{xx}     a character without the xx property
         \R         a newline sequence
         \s         a white space character
         \S         a character that is not a white space character
         \v         a vertical white space character
         \V         a character that is not a vertical white space character
         \w         a "word" character
         \W         a "non-word" character
         \X         a Unicode extended grapheme cluster

       \C is dangerous because it may leave the current matching point in  the
       middle of a UTF-8 or UTF-16 character. The application can lock out the
       use of \C by setting the PCRE2_NEVER_BACKSLASH_C  option.  It  is  also
       possible to build PCRE2 with the use of \C permanently disabled.

       By  default,  \d, \s, and \w match only ASCII characters, even in UTF-8
       mode or in the 16-bit and 32-bit libraries. However, if locale-specific
       matching  is  happening,  \s and \w may also match characters with code
       points in the range 128-255. If the PCRE2_UCP option is set, the behav-
       iour of these escape sequences is changed to use Unicode properties and
       they match many more characters.


GENERAL CATEGORY PROPERTIES FOR \p and \P

         C          Other
         Cc         Control
         Cf         Format
         Cn         Unassigned
         Co         Private use
         Cs         Surrogate

         L          Letter
         Ll         Lower case letter
         Lm         Modifier letter
         Lo         Other letter
         Lt         Title case letter
         Lu         Upper case letter
         L&         Ll, Lu, or Lt

         M          Mark
         Mc         Spacing mark
         Me         Enclosing mark
         Mn         Non-spacing mark

         N          Number
         Nd         Decimal number
         Nl         Letter number
         No         Other number

         P          Punctuation
         Pc         Connector punctuation
         Pd         Dash punctuation
         Pe         Close punctuation
         Pf         Final punctuation
         Pi         Initial punctuation
         Po         Other punctuation
         Ps         Open punctuation

         S          Symbol
         Sc         Currency symbol
         Sk         Modifier symbol
         Sm         Mathematical symbol
         So         Other symbol

         Z          Separator
         Zl         Line separator
         Zp         Paragraph separator
         Zs         Space separator


PCRE2 SPECIAL CATEGORY PROPERTIES FOR \p and \P

         Xan        Alphanumeric: union of properties L and N
         Xps        POSIX space: property Z or tab, NL, VT, FF, CR
         Xsp        Perl space: property Z or tab, NL, VT, FF, CR
         Xuc        Univerally-named character: one that can be
                      represented by a Universal Character Name
         Xwd        Perl word: property Xan or underscore

       Perl and POSIX space are now the same. Perl added VT to its space char-
       acter set at release 5.18.


SCRIPT NAMES FOR \p AND \P

       Ahom,   Anatolian_Hieroglyphs,  Arabic,  Armenian,  Avestan,  Balinese,
       Bamum, Bassa_Vah, Batak, Bengali, Bopomofo, Brahmi, Braille,  Buginese,
       Buhid,  Canadian_Aboriginal,  Carian, Caucasian_Albanian, Chakma, Cham,
       Cherokee,  Common,  Coptic,  Cuneiform,  Cypriot,  Cyrillic,   Deseret,
       Devanagari,  Duployan,  Egyptian_Hieroglyphs,  Elbasan, Ethiopic, Geor-
       gian, Glagolitic, Gothic,  Grantha,  Greek,  Gujarati,  Gurmukhi,  Han,
       Hangul, Hanunoo, Hatran, Hebrew, Hiragana, Imperial_Aramaic, Inherited,
       Inscriptional_Pahlavi, Inscriptional_Parthian, Javanese,  Kaithi,  Kan-
       nada,  Katakana,  Kayah_Li,  Kharoshthi, Khmer, Khojki, Khudawadi, Lao,
       Latin, Lepcha, Limbu, Linear_A, Linear_B, Lisu, Lycian,  Lydian,  Maha-
       jani,  Malayalam,  Mandaic,  Manichaean,  Meetei_Mayek,  Mende_Kikakui,
       Meroitic_Cursive, Meroitic_Hieroglyphs,  Miao,  Modi,  Mongolian,  Mro,
       Multani,   Myanmar,   Nabataean,  New_Tai_Lue,  Nko,  Ogham,  Ol_Chiki,
       Old_Hungarian, Old_Italic, Old_North_Arabian, Old_Permic,  Old_Persian,
       Old_South_Arabian, Old_Turkic, Oriya, Osmanya, Pahawh_Hmong, Palmyrene,
       Pau_Cin_Hau,  Phags_Pa,  Phoenician,  Psalter_Pahlavi,  Rejang,  Runic,
       Samaritan, Saurashtra, Sharada, Shavian, Siddham, SignWriting, Sinhala,
       Sora_Sompeng,  Sundanese,  Syloti_Nagri,  Syriac,  Tagalog,   Tagbanwa,
       Tai_Le,   Tai_Tham,  Tai_Viet,  Takri,  Tamil,  Telugu,  Thaana,  Thai,
       Tibetan, Tifinagh, Tirhuta, Ugaritic, Vai, Warang_Citi, Yi.


CHARACTER CLASSES

         [...]       positive character class
         [^...]      negative character class
         [x-y]       range (can be used for hex characters)
         [[:xxx:]]   positive POSIX named set
         [[:^xxx:]]  negative POSIX named set

         alnum       alphanumeric
         alpha       alphabetic
         ascii       0-127
         blank       space or tab
         cntrl       control character
         digit       decimal digit
         graph       printing, excluding space
         lower       lower case letter
         print       printing, including space
         punct       printing, excluding alphanumeric
         space       white space
         upper       upper case letter
         word        same as \w
         xdigit      hexadecimal digit

       In PCRE2, POSIX character set names recognize only ASCII characters  by
       default,  but  some of them use Unicode properties if PCRE2_UCP is set.
       You can use \Q...\E inside a character class.


QUANTIFIERS

         ?           0 or 1, greedy
         ?+          0 or 1, possessive
         ??          0 or 1, lazy
         *           0 or more, greedy
         *+          0 or more, possessive
         *?          0 or more, lazy
         +           1 or more, greedy
         ++          1 or more, possessive
         +?          1 or more, lazy
         {n}         exactly n
         {n,m}       at least n, no more than m, greedy
         {n,m}+      at least n, no more than m, possessive
         {n,m}?      at least n, no more than m, lazy
         {n,}        n or more, greedy
         {n,}+       n or more, possessive
         {n,}?       n or more, lazy


ANCHORS AND SIMPLE ASSERTIONS

         \b          word boundary
         \B          not a word boundary
         ^           start of subject
                       also after an internal newline in multiline mode
                       (after any newline if PCRE2_ALT_CIRCUMFLEX is set)
         \A          start of subject
         $           end of subject
                       also before newline at end of subject
                       also before internal newline in multiline mode
         \Z          end of subject
                       also before newline at end of subject
         \z          end of subject
         \G          first matching position in subject


MATCH POINT RESET

         \K          reset start of match

       \K is honoured in positive assertions, but ignored in negative ones.


ALTERNATION

         expr|expr|expr...


CAPTURING

         (...)           capturing group
         (?<name>...)    named capturing group (Perl)
         (?'name'...)    named capturing group (Perl)
         (?P<name>...)   named capturing group (Python)
         (?:...)         non-capturing group
         (?|...)         non-capturing group; reset group numbers for
                          capturing groups in each alternative


ATOMIC GROUPS

         (?>...)         atomic, non-capturing group


COMMENT

         (?#....)        comment (not nestable)


OPTION SETTING

         (?i)            caseless
         (?J)            allow duplicate names
         (?m)            multiline
         (?n)            no auto capture
         (?s)            single line (dotall)
         (?U)            default ungreedy (lazy)
         (?x)            extended: ignore white space except in classes
         (?xx)           as (?x) but also ignore space and tab in classes
         (?-...)         unset option(s)

       The following are recognized only at the very start  of  a  pattern  or
       after  one  of the newline or \R options with similar syntax. More than
       one of them may appear. For the first three, d is a decimal number.

         (*LIMIT_DEPTH=d) set the backtracking limit to d
         (*LIMIT_HEAP=d)  set the heap size limit to d kilobytes
         (*LIMIT_MATCH=d) set the match limit to d
         (*NOTEMPTY)      set PCRE2_NOTEMPTY when matching
         (*NOTEMPTY_ATSTART) set PCRE2_NOTEMPTY_ATSTART when matching
         (*NO_AUTO_POSSESS) no auto-possessification (PCRE2_NO_AUTO_POSSESS)
         (*NO_DOTSTAR_ANCHOR) no .* anchoring (PCRE2_NO_DOTSTAR_ANCHOR)
         (*NO_JIT)       disable JIT optimization
         (*NO_START_OPT) no start-match optimization (PCRE2_NO_START_OPTIMIZE)
         (*UTF)          set appropriate UTF mode for the library in use
         (*UCP)          set PCRE2_UCP (use Unicode properties for \d etc)

       Note that LIMIT_DEPTH, LIMIT_HEAP, and LIMIT_MATCH can only reduce  the
       value   of   the   limits   set  by  the  caller  of  pcre2_match()  or
       pcre2_dfa_match(), not increase them. LIMIT_RECURSION  is  an  obsolete
       synonym for LIMIT_DEPTH. The application can lock out the use of (*UTF)
       and (*UCP) by setting the PCRE2_NEVER_UTF or  PCRE2_NEVER_UCP  options,
       respectively, at compile time.


NEWLINE CONVENTION

       These  are  recognized  only  at the very start of the pattern or after
       option settings with a similar syntax.

         (*CR)           carriage return only
         (*LF)           linefeed only
         (*CRLF)         carriage return followed by linefeed
         (*ANYCRLF)      all three of the above
         (*ANY)          any Unicode newline sequence
         (*NUL)          the NUL character (binary zero)


WHAT \R MATCHES

       These are recognized only at the very start of  the  pattern  or  after
       option setting with a similar syntax.

         (*BSR_ANYCRLF)  CR, LF, or CRLF
         (*BSR_UNICODE)  any Unicode newline sequence


LOOKAHEAD AND LOOKBEHIND ASSERTIONS

         (?=...)         positive look ahead
         (?!...)         negative look ahead
         (?<=...)        positive look behind
         (?<!...)        negative look behind

       Each top-level branch of a look behind must be of a fixed length.


BACKREFERENCES

         \n              reference by number (can be ambiguous)
         \gn             reference by number
         \g{n}           reference by number
         \g+n            relative reference by number (PCRE2 extension)
         \g-n            relative reference by number
         \g{+n}          relative reference by number (PCRE2 extension)
         \g{-n}          relative reference by number
         \k<name>        reference by name (Perl)
         \k'name'        reference by name (Perl)
         \g{name}        reference by name (Perl)
         \k{name}        reference by name (.NET)
         (?P=name)       reference by name (Python)


SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)

         (?R)            recurse whole pattern
         (?n)            call subpattern by absolute number
         (?+n)           call subpattern by relative number
         (?-n)           call subpattern by relative number
         (?&name)        call subpattern by name (Perl)
         (?P>name)       call subpattern by name (Python)
         \g<name>        call subpattern by name (Oniguruma)
         \g'name'        call subpattern by name (Oniguruma)
         \g<n>           call subpattern by absolute number (Oniguruma)
         \g'n'           call subpattern by absolute number (Oniguruma)
         \g<+n>          call subpattern by relative number (PCRE2 extension)
         \g'+n'          call subpattern by relative number (PCRE2 extension)
         \g<-n>          call subpattern by relative number (PCRE2 extension)
         \g'-n'          call subpattern by relative number (PCRE2 extension)


CONDITIONAL PATTERNS

         (?(condition)yes-pattern)
         (?(condition)yes-pattern|no-pattern)

         (?(n)               absolute reference condition
         (?(+n)              relative reference condition
         (?(-n)              relative reference condition
         (?(<name>)          named reference condition (Perl)
         (?('name')          named reference condition (Perl)
         (?(name)            named reference condition (PCRE2, deprecated)
         (?(R)               overall recursion condition
         (?(Rn)              specific numbered group recursion condition
         (?(R&name)          specific named group recursion condition
         (?(DEFINE)          define subpattern for reference
         (?(VERSION[>]=n.m)  test PCRE2 version
         (?(assert)          assertion condition

       Note  the  ambiguity of (?(R) and (?(Rn) which might be named reference
       conditions or recursion tests. Such a condition  is  interpreted  as  a
       reference condition if the relevant named group exists.


BACKTRACKING CONTROL

       The following act immediately they are reached:

         (*ACCEPT)       force successful match
         (*FAIL)         force backtrack; synonym (*F)
         (*MARK:NAME)    set name to be passed back; synonym (*:NAME)

       The  following  act only when a subsequent match failure causes a back-
       track to reach them. They all force a match failure, but they differ in
       what happens afterwards. Those that advance the start-of-match point do
       so only if the pattern is not anchored.

         (*COMMIT)       overall failure, no advance of starting point
         (*PRUNE)        advance to next starting character
         (*PRUNE:NAME)   equivalent to (*MARK:NAME)(*PRUNE)
         (*SKIP)         advance to current matching position
         (*SKIP:NAME)    advance to position corresponding to an earlier
                         (*MARK:NAME); if not found, the (*SKIP) is ignored
         (*THEN)         local failure, backtrack to next alternation
         (*THEN:NAME)    equivalent to (*MARK:NAME)(*THEN)


CALLOUTS

         (?C)            callout (assumed number 0)
         (?Cn)           callout with numerical data n
         (?C"text")      callout with string data

       The allowed string delimiters are ` ' " ^ % # $ (which are the same for
       the  start  and the end), and the starting delimiter { matched with the
       ending delimiter }. To encode the ending delimiter within  the  string,
       double it.


SEE ALSO

       pcre2pattern(3),    pcre2api(3),   pcre2callout(3),   pcre2matching(3),
       pcre2(3).


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 17 June 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


PCRE2UNICODE(3)            Library Functions Manual            PCRE2UNICODE(3)



NAME
       PCRE - Perl-compatible regular expressions (revised API)

UNICODE AND UTF SUPPORT

       When PCRE2 is built with Unicode support (which is the default), it has
       knowledge of Unicode character properties and can process text  strings
       in  UTF-8, UTF-16, or UTF-32 format (depending on the code unit width).
       However, by default, PCRE2 assumes that one code unit is one character.
       To  process  a  pattern  as a UTF string, where a character may require
       more than one  code  unit,  you  must  call  pcre2_compile()  with  the
       PCRE2_UTF  option  flag,  or  the  pattern must start with the sequence
       (*UTF). When either of these is the case, both the pattern and any sub-
       ject  strings  that  are  matched against it are treated as UTF strings
       instead of strings of individual one-code-unit characters.

       If you do not need Unicode support you can build PCRE2 without  it,  in
       which case the library will be smaller.


UNICODE PROPERTY SUPPORT

       When  PCRE2 is built with Unicode support, the escape sequences \p{..},
       \P{..}, and \X can be used. The Unicode properties that can  be  tested
       are  limited to the general category properties such as Lu for an upper
       case letter or Nd for a decimal number, the Unicode script  names  such
       as Arabic or Han, and the derived properties Any and L&. Full lists are
       given in the pcre2pattern and pcre2syntax documentation. Only the short
       names  for  properties are supported. For example, \p{L} matches a let-
       ter. Its Perl synonym, \p{Letter}, is not supported.   Furthermore,  in
       Perl,  many properties may optionally be prefixed by "Is", for compati-
       bility with Perl 5.6. PCRE2 does not support this.


WIDE CHARACTERS AND UTF MODES

       Codepoints less than 256 can be specified in patterns by either  braced
       or unbraced hexadecimal escape sequences (for example, \x{b3} or \xb3).
       Larger values have to use braced sequences. Unbraced octal code  points
       up to \777 are also recognized; larger ones can be coded using \o{...}.

       In  UTF modes, repeat quantifiers apply to complete UTF characters, not
       to individual code units.

       In UTF modes, the dot metacharacter matches one UTF  character  instead
       of a single code unit.

       The escape sequence \C can be used to match a single code unit in a UTF
       mode, but its use can lead to some strange effects because it breaks up
       multi-unit  characters  (see  the description of \C in the pcre2pattern
       documentation).

       The use of \C is not supported by  the  alternative  matching  function
       pcre2_dfa_match() when in UTF-8 or UTF-16 mode, that is, when a charac-
       ter may consist of more than one code unit. The  use  of  \C  in  these
       modes  provokes a match-time error. Also, the JIT optimization does not
       support \C in these modes. If JIT optimization is requested for a UTF-8
       or  UTF-16  pattern  that contains \C, it will not succeed, and so when
       pcre2_match() is called, the matching will be carried out by the normal
       interpretive function.

       The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly test
       characters of any code value, but,  by  default,  the  characters  that
       PCRE2  recognizes as digits, spaces, or word characters remain the same
       set as in non-UTF mode, all  with  code  points  less  than  256.  This
       remains  true  even  when  PCRE2  is  built to include Unicode support,
       because to do otherwise would slow down matching in many common  cases.
       Note  that  this also applies to \b and \B, because they are defined in
       terms of \w and \W. If you want to test for  a  wider  sense  of,  say,
       "digit",  you  can  use explicit Unicode property tests such as \p{Nd}.
       Alternatively, if you set the PCRE2_UCP option, the way that the  char-
       acter  escapes  work  is changed so that Unicode properties are used to
       determine which characters match. There are more details in the section
       on generic character types in the pcre2pattern documentation.

       Similarly,  characters that match the POSIX named character classes are
       all low-valued characters, unless the PCRE2_UCP option is set.

       However, the special  horizontal  and  vertical  white  space  matching
       escapes (\h, \H, \v, and \V) do match all the appropriate Unicode char-
       acters, whether or not PCRE2_UCP is set.


CASE-EQUIVALENCE IN UTF MODES

       Case-insensitive matching in a UTF mode makes use of Unicode properties
       except for characters whose code points are less than 128 and that have
       at most two case-equivalent values. For these, a direct table lookup is
       used  for speed. A few Unicode characters such as Greek sigma have more
       than two codepoints that are case-equivalent, and these are treated  as
       such.


VALIDITY OF UTF STRINGS

       When  the  PCRE2_UTF  option is set, the strings passed as patterns and
       subjects are (by default) checked for validity on entry to the relevant
       functions.   If an invalid UTF string is passed, an negative error code
       is returned. The code unit offset to the  offending  character  can  be
       extracted  from  the match data block by calling pcre2_get_startchar(),
       which is used for this purpose after a UTF error.

       UTF-16 and UTF-32 strings can indicate their endianness by special code
       knows  as  a  byte-order  mark (BOM). The PCRE2 functions do not handle
       this, expecting strings to be in host byte order.

       A UTF string is checked before any other processing takes place. In the
       case  of  pcre2_match()  and  pcre2_dfa_match()  calls  with a non-zero
       starting offset, the check is applied only to that part of the  subject
       that  could be inspected during matching, and there is a check that the
       starting offset points to the first code unit of a character or to  the
       end  of  the subject. If there are no lookbehind assertions in the pat-
       tern, the check starts at the starting offset. Otherwise, it starts  at
       the  length of the longest lookbehind before the starting offset, or at
       the start of the subject if there are not that many  characters  before
       the  starting offset. Note that the sequences \b and \B are one-charac-
       ter lookbehinds.

       In addition to checking the format of the string, there is a  check  to
       ensure that all code points lie in the range U+0 to U+10FFFF, excluding
       the surrogate area. The so-called "non-character" code points  are  not
       excluded because Unicode corrigendum #9 makes it clear that they should
       not be.

       Characters in the "Surrogate Area" of Unicode are reserved for  use  by
       UTF-16,  where they are used in pairs to encode code points with values
       greater than 0xFFFF. The code points that are encoded by  UTF-16  pairs
       are  available  independently  in  the  UTF-8 and UTF-32 encodings. (In
       other words, the whole surrogate thing is  a  fudge  for  UTF-16  which
       unfortunately messes up UTF-8 and UTF-32.)

       In  some  situations, you may already know that your strings are valid,
       and therefore want to skip these checks in  order  to  improve  perfor-
       mance,  for  example in the case of a long subject string that is being
       scanned repeatedly.  If you set the PCRE2_NO_UTF_CHECK option  at  com-
       pile  time  or at match time, PCRE2 assumes that the pattern or subject
       it is given (respectively) contains only valid UTF code unit sequences.

       Passing PCRE2_NO_UTF_CHECK to pcre2_compile() just disables  the  check
       for the pattern; it does not also apply to subject strings. If you want
       to disable the check for a subject string you must pass this option  to
       pcre2_match() or pcre2_dfa_match().

       If  you  pass an invalid UTF string when PCRE2_NO_UTF_CHECK is set, the
       result is undefined and your program may crash or loop indefinitely.

       Note that setting PCRE2_NO_UTF_CHECK at compile time does  not  disable
       the  error  that  is given if an escape sequence for an invalid Unicode
       code point is encountered in the pattern. If you want to  allow  escape
       sequences  such  as  \x{d800}  (a surrogate code point) you can set the
       PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES extra option. However, this is pos-
       sible only in UTF-8 and UTF-32 modes, because these values are not rep-
       resentable in UTF-16.

   Errors in UTF-8 strings

       The following negative error codes are given for invalid UTF-8 strings:

         PCRE2_ERROR_UTF8_ERR1
         PCRE2_ERROR_UTF8_ERR2
         PCRE2_ERROR_UTF8_ERR3
         PCRE2_ERROR_UTF8_ERR4
         PCRE2_ERROR_UTF8_ERR5

       The string ends with a truncated UTF-8 character;  the  code  specifies
       how  many bytes are missing (1 to 5). Although RFC 3629 restricts UTF-8
       characters to be no longer than 4 bytes, the  encoding  scheme  (origi-
       nally  defined  by  RFC  2279)  allows  for  up to 6 bytes, and this is
       checked first; hence the possibility of 4 or 5 missing bytes.

         PCRE2_ERROR_UTF8_ERR6
         PCRE2_ERROR_UTF8_ERR7
         PCRE2_ERROR_UTF8_ERR8
         PCRE2_ERROR_UTF8_ERR9
         PCRE2_ERROR_UTF8_ERR10

       The two most significant bits of the 2nd, 3rd, 4th, 5th, or 6th byte of
       the  character  do  not have the binary value 0b10 (that is, either the
       most significant bit is 0, or the next bit is 1).

         PCRE2_ERROR_UTF8_ERR11
         PCRE2_ERROR_UTF8_ERR12

       A character that is valid by the RFC 2279 rules is either 5 or 6  bytes
       long; these code points are excluded by RFC 3629.

         PCRE2_ERROR_UTF8_ERR13

       A  4-byte character has a value greater than 0x10fff; these code points
       are excluded by RFC 3629.

         PCRE2_ERROR_UTF8_ERR14

       A 3-byte character has a value in the  range  0xd800  to  0xdfff;  this
       range  of code points are reserved by RFC 3629 for use with UTF-16, and
       so are excluded from UTF-8.

         PCRE2_ERROR_UTF8_ERR15
         PCRE2_ERROR_UTF8_ERR16
         PCRE2_ERROR_UTF8_ERR17
         PCRE2_ERROR_UTF8_ERR18
         PCRE2_ERROR_UTF8_ERR19

       A 2-, 3-, 4-, 5-, or 6-byte character is "overlong", that is, it  codes
       for  a  value that can be represented by fewer bytes, which is invalid.
       For example, the two bytes 0xc0, 0xae give the value 0x2e,  whose  cor-
       rect coding uses just one byte.

         PCRE2_ERROR_UTF8_ERR20

       The two most significant bits of the first byte of a character have the
       binary value 0b10 (that is, the most significant bit is 1 and the  sec-
       ond  is  0). Such a byte can only validly occur as the second or subse-
       quent byte of a multi-byte character.

         PCRE2_ERROR_UTF8_ERR21

       The first byte of a character has the value 0xfe or 0xff. These  values
       can never occur in a valid UTF-8 string.

   Errors in UTF-16 strings

       The  following  negative  error  codes  are  given  for  invalid UTF-16
       strings:

         PCRE2_ERROR_UTF16_ERR1  Missing low surrogate at end of string
         PCRE2_ERROR_UTF16_ERR2  Invalid low surrogate follows high surrogate
         PCRE2_ERROR_UTF16_ERR3  Isolated low surrogate


   Errors in UTF-32 strings

       The following  negative  error  codes  are  given  for  invalid  UTF-32
       strings:

         PCRE2_ERROR_UTF32_ERR1  Surrogate character (0xd800 to 0xdfff)
         PCRE2_ERROR_UTF32_ERR2  Code point is greater than 0x10ffff


AUTHOR

       Philip Hazel
       University Computing Service
       Cambridge, England.


REVISION

       Last updated: 17 May 2017
       Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------


